Categories

Specials

All specials

Best sellers

All best sellers

Breakout Boards & Interface There are 224 products.

Breakout Boards & Interface

A printed circuit board (PCB) mechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-conductive substrate. PCBs can be single sided (one copper layer), double sided (two copper layers) or multi-layer. Conductors on different layers are connected with plated-through holes called vias. Advanced PCBs may contain components - capacitors, resistors or active devices...  More

  • New!
    8 Megapixel Raspberry Pi Camera V2 _A1319
    Available
    8 Megapixel Raspberry Pi Camera V2 _A1319

    The Raspberry Pi camera module v2 replaced the original camera module in April 2016. The v2 camera has a Sony IMX219 8-megapixel sensor (compared to the 5-megapixel OmniVision OV5647 sensor of the original camera). The camera module can be used to take high-definition video, as well as stills photographs. more detail given below

    The Raspberry Pi camera module v2 replaced the original camera module in April 2016....

    The Raspberry Pi camera module v2 replaced the original camera module in April 2016. The v2 camera has a Sony IMX219 8-megapixel sensor (compared to the 5-megapixel OmniVision...

  • New!
    1.3" Inch Blue I2C IIC Serial 128X64 OLED LCD Display Module
    Available
    1.3" Inch Blue I2C IIC Serial 128X64 OLED LCD Display Module _A1316

    Size: 1.3Resolution: 128X64Color: BlueViewing angle: greater than 160 degreesSupported platforms: for  arduino, 51 series, MSP430 series, STIM32 / 2, SCR chipsLow power consumption: 0.04W during normal operationSupport wide voltage: 3.3V-5V DCWorking temperature: -30-80 degrees... MORE DETAIL GIVEN Below

    Size: 1.3Resolution: 128X64Color: BlueViewing angle: greater than 160 degreesSupported...

    Size: 1.3Resolution: 128X64Color: BlueViewing angle: greater than 160 degreesSupported platforms: for  arduino, 51 series, MSP430 series, STIM32 / 2, SCR chipsLow power...

  • New!
    Available
    Educational BoosterPack MKII - BOOSTXL-EDUMKII - TI _A01326

    The Educational BoosterPack MKII offers a high level of integration for developers to quickly prototype complete solutions. Various analog and digital inputs/outputs are at your disposal including an analog joystick, environmental and motion sensors, RGB LED, microphone, buzz.... Technical Documents : http://www.ti.com/tool/boostxl-edumkii#Technical Documents more detail given below

    The Educational BoosterPack MKII offers a high level of integration for developers to...

    The Educational BoosterPack MKII offers a high level of integration for developers to quickly prototype complete solutions. Various analog and digital inputs/outputs are at your...

    ₨ 12,800
    Add to cart View
  • New!
    100A 75mV FL-2 DC Current Shunt Resistor For Amp Ampere Panel Meter _A1196
    Available
    100A 75mV FL-2 DC Current Shunt Resistor For Amp Ampere Panel Meter _A1196

    Description:This is 100A 75mV FL-2 DC current shunt resistor for amp ampere panel meterThe fixed setpoint shunt is a suitable the attached external shunt for measuring DC current in 10kA less directly acting on the analog display instrument together with the use in order to expand the scope of the DC current measurement, or sequentially... more detail given below

    Description:This is 100A 75mV FL-2 DC current shunt resistor for amp ampere panel...

    Description:This is 100A 75mV FL-2 DC current shunt resistor for amp ampere panel meterThe fixed setpoint shunt is a suitable the attached external shunt for measuring DC...

  • FPV Camera 700 TVL 5V-12V 2.8mm PAL Format Recording System for Quadcopter
    Available
    Mini 700TVL 5V-12V 2.8mm FPV Camera with LRC Filter _A1235

    Specifications:Definition: 700 TVLIllumination: 0.5lux, 0.001luxS/N: more than or equal to 48dBGama: 0.45Focal length: 2.8mmFrame speed: PAL 25f/sWhite balance: autoVideo out: CVBS 1Vp-pAudio out: yesTV format: PAL Power: 12v 1AVoltage range: DC 5V-12VPower consumption: 80mA, 120mASize: approx 1.4x1.3x1cmColor: multicolorNet weight: 5g

    Specifications:Definition: 700 TVLIllumination: 0.5lux, 0.001luxS/N: more than or equal...

    Specifications:Definition: 700 TVLIllumination: 0.5lux, 0.001luxS/N: more than or equal to 48dBGama: 0.45Focal length: 2.8mmFrame speed: PAL 25f/sWhite balance: autoVideo out:...

  • JY-MCU 3208 Lattice Clock Dot Matrix Clock HT1632C Driver MCU Support Secondary Development
    Available
    JY-MCU 3208 Lattice Dot Matrix Clock HT1632C Driver With MCU _A1313

    Description:The module ASIC driver HT1632C lattice, without requiring an MCU scan, do not take MCU resources, 16 adjustable brightness, saving three IO lines / four-wire interface module is reserved for a ATMEGA8 microcontroller, AVR USB, mini USB Chip Block, buzzer, 18B20 temperature sensor, LED metering port, infrared more detail given below

    Description:The module ASIC driver HT1632C lattice, without requiring an MCU scan, do...

    Description:The module ASIC driver HT1632C lattice, without requiring an MCU scan, do not take MCU resources, 16 adjustable brightness, saving three IO lines / four-wire...

  • DS3231 AT24C32 IIC module precision Real time clock module memory module Arduino
    Available
    RTC DS3231IIC Module Precision Real Time Clock Module with Battery _A1314

    Wiring instructions (with Arduino uno r3 for example):SCL → A5SDA → A4VCC → 5VGND → GND Size: 38mm (length) * 22mm (W) * 14mm (height)Operating voltage :3.3 - 5 .5 VClock chip: high-precision clock chip DS3231Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute more detail given below

    Wiring instructions (with Arduino uno r3 for example):SCL → A5SDA → A4VCC → 5VGND →...

    Wiring instructions (with Arduino uno r3 for example):SCL → A5SDA → A4VCC → 5VGND → GND Size: 38mm (length) * 22mm (W) * 14mm (height)Operating voltage :3.3 - 5 .5 VClock chip:...

  • L9110 Fan Module for Arduino
    Available
    Fire Fighting FAN Module for Fire Fighting Robot _A1198

    Product Size: 50 * 26 * 15mm (excluding propellers) Propeller diameter: 75mm Operating voltage: 5V L9110 driver can control Reversible with mounting holes compatible steering rudder propeller control quality and high efficiency. 20cm making it easy to blow out the flame can be used outside of the fire lighter robot, robot design and development of essential

    Product Size: 50 * 26 * 15mm (excluding propellers) Propeller diameter: 75mm Operating...

    Product Size: 50 * 26 * 15mm (excluding propellers) Propeller diameter: 75mm Operating voltage: 5V L9110 driver can control Reversible with mounting holes compatible steering...

  • TCRT5000L TCRT5000 Reflective Optical Sensor Infrared IR Switch
    Available
    TCRT5000 Reflective Optical Sensor IR _A1197

    The TCRT5000(L) has a compact construction where the emitting-light source and the detector are arranged in the same direction to sense the presence of an object by using the reflective IR beam from the object. The detector consists of a phototransistor.

    The TCRT5000(L) has a compact construction where the emitting-light source and the...

    The TCRT5000(L) has a compact construction where the emitting-light source and the detector are arranged in the same direction to sense the presence of an object by using the...

  • Available
    50A 75mV FL-2 DC Current Shunt Resistor For Amp Ampere Panel Meter _A1195

    High quality and good performance.Used for a DC 50A current Amp meter.Easy to install.Accuracy: Class 0.Voltage Drop: 75MV.Specifications :Color: BlackMaterial: Steel, cupro-managanese, plasticDimension (L x W x H): Approx. 4 1/2 x 1 x 3/4 inch (12 x 2.5 x 1.8cm) Datasheet: http://www.token.com.tw/pdf/current-sense/shunt-resistors.pdf

    High quality and good performance.Used for a DC 50A current Amp meter.Easy to...

    High quality and good performance.Used for a DC 50A current Amp meter.Easy to install.Accuracy: Class 0.Voltage Drop: 75MV.Specifications :Color: BlackMaterial: Steel,...

  • Infrared Night Vision Surveillance Camera Board IR 5MP For Raspberry Pi
    Available
    Infrared Night Vision IR 5MP Raspberry Pi NoIR Camera Orignal _A1194

    The Raspberry Pi NoIR Camera Module is a custom designed night vision camera module for Raspberry Pi. Unlike the regular Pi camera, the NoIR does not have an IR cut filter, making it sensitive to IR illumination. more detail given below

    The Raspberry Pi NoIR Camera Module is a custom designed night vision camera module for...

    The Raspberry Pi NoIR Camera Module is a custom designed night vision camera module for Raspberry Pi. Unlike the regular Pi camera, the NoIR does not have an IR cut filter,...

  • AD8232
    Out of stock
    ECG EMG Heart Rate Monitor with Electrode and Prob - AD8232 _A1189

    Description: The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading. ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op amp to help obtain a... more detail given below

    Description: The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective...

    Description: The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be...

    ₨ 2,500
    Add to cart View
  • MQ-5 MQ5 Methane Gas Sensor Shield Detector Module for Arduino Mega2560 M27
    Available
    MQ-5 Methane Gas Sensor _A1185

    Main chip: LM393, ZYMQ-5 gas sensorOperating voltage: DC 5 Volt Indication of the signal output.Dual signal output (analog output, and TTL level output)TTL output signal is low. (When low output signal light, and can be connected directly  Datasheet: https://www.parallax.com/sites/default/files/downloads/605-00009-MQ-5-Datasheet.pdf more detail given below

    Main chip: LM393, ZYMQ-5 gas sensorOperating voltage: DC 5 Volt Indication of the...

    Main chip: LM393, ZYMQ-5 gas sensorOperating voltage: DC 5 Volt Indication of the signal output.Dual signal output (analog output, and TTL level output)TTL output signal is low....

  • Out of stock
    5A DC-DC Adjustable Step-down Module Input 4~38V _A1183

    Performance parameters:Input voltage range:4-38VDC(Note:input voltage not exceeding 38V)Output voltage range:1.25-36VDC adjustableOutput current: 0-5AOutput power: 75WHigh efficiency up to 96 percentBuilt in thermal shutdown functionBuilt in current limit functionBuilt in output short protection functionInput reverse polarity protection:... More detail given below

    Performance parameters:Input voltage range:4-38VDC(Note:input voltage not exceeding...

    Performance parameters:Input voltage range:4-38VDC(Note:input voltage not exceeding 38V)Output voltage range:1.25-36VDC adjustableOutput current: 0-5AOutput power: 75WHigh...

    ₨ 280
    Add to cart View
  • Out of stock
    Stepper Motor Arduino 3D Printer / CNC Shield V3 _A1182

    100% brand new and high qualityThis expansion board as a driver expansion board, can be used for engraving machines, 3D printers.It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.UNO for more detail given below

    100% brand new and high qualityThis expansion board as a driver expansion board, can be...

    100% brand new and high qualityThis expansion board as a driver expansion board, can be used for engraving machines, 3D printers.It is a total of four slots, can drive four...

    ₨ 550
    Add to cart View
  • Out of stock
    Seven Segment Digital Clock Display TM1637 I2C for Arduino etc. _A1170

    The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube.Display common anode for the four red LEDDigital tube 8 gray adjustableLevel control interface for 5V or 3.3VHow to Use it: http://www.instructables.com/id/4-Digit-Two-Wire-Display/

    The module is a 12 foot with a clock point four common anode tube (0.36 in.) display...

    The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver IC TM1637, only two signal lines can make the MCU control 4 8 digital...

    ₨ 190
    Add to cart View
  • Active Single Phase Voltage Transformer Module AC Output Voltage Sensor for Arduino Mega
    Out of stock
    Wide Range AC Voltage Sensor Module _A1169

    Sensor : ZMPT101BOnboard precision miniature voltage transformerOnboard high-precision op amp circuits for signal sampling and adequate compensation to make precise functionsModules can be measured within the 250V AC voltage, the corresponding analog output can be adjustedPCB board size: 49.5 (mm) x19.4 (mm)Datasheet: http://www.zeming-e.com/file/0_2013_10_18_093344.pdf

    Sensor : ZMPT101BOnboard precision miniature voltage transformerOnboard high-precision...

    Sensor : ZMPT101BOnboard precision miniature voltage transformerOnboard high-precision op amp circuits for signal sampling and adequate compensation to make precise...

    ₨ 750
    Add to cart View
  • Available
    Battery Level Bar Segment Display I2C based _A1159

    This is battery level display module based on battery style digital tube LED. The 5 - segment LED inside is red light and the frame is green light. There is driver chip TM1651 onboard, so the control interface is simple, just two signal lines and VCC / GND. It can be used to display the battery power.

    This is battery level display module based on battery style digital tube LED. The 5 -...

    This is battery level display module based on battery style digital tube LED. The 5 - segment LED inside is red light and the frame is green light. There is driver chip TM1651...

  • 10 Segment RYG LED Bar Graph -Multicolor _A1157
    Out of stock
    10 Segment RYG LED Bar Graph -Multicolor _A1157

    Description: These 10 segment bar graph LEDs have many uses. With a compact footprint, simple hookup, they are easy for prototyping or finished products. Essentially, they are 10 individual yellow LEDs housed together, each with an individual anode and cathode connection. Datasheet

    Description: These 10 segment bar graph LEDs have many uses. With a compact footprint,...

    Description: These 10 segment bar graph LEDs have many uses. With a compact footprint, simple hookup, they are easy for prototyping or finished products. Essentially, they are...

    ₨ 50
    Add to cart View
  • 10 bit LED Lighting Tube 4 Color Red
    Available
    10 Segment LED Bar Graph -Green _A1156

    Description: These 10 segment bar graph LEDs have many uses. With a compact footprint, simple hookup, they are easy for prototyping or finished products. Essentially, they are 10 individual blue LEDs housed together, each with an individual anode and cathode connection. Documents: Datasheet YouTube Video Demo

    Description: These 10 segment bar graph LEDs have many uses. With a compact footprint,...

    Description: These 10 segment bar graph LEDs have many uses. With a compact footprint, simple hookup, they are easy for prototyping or finished products. Essentially, they are...

  • HLK-PM01 AC-DC 100-240V to 5V Mini Power Supply Module
    Available
    AC-DC 240V AC to 5V DC Mini Power Supply Module _A1152

    .Product Features1). The ultra-thin, subminiature2). The full voltage input (90 ~ 264 Vac)3). Low ripple and low noise4). Output overload short circuit protection function More detail given below HLK-PM01 AC-DC 100-240V to 5V 

    .Product Features1). The ultra-thin, subminiature2). The full voltage input (90 ~ 264...

    .Product Features1). The ultra-thin, subminiature2). The full voltage input (90 ~ 264 Vac)3). Low ripple and low noise4). Output overload short circuit protection function More...

  • LV4 CCD Code Scanning Module
    Available
    Barcode Reader/Scanner Module _A1138

    This LV4 series linear imaging bar code scanner module features a scan speed of 85 scans/sec with small footprint to meet all applications.  Built-in LED, Software commands supported and the affordable costs, the durable design with no moving parts delivers the best choice for the contact scanning required application. More detail given below

    This LV4 series linear imaging bar code scanner module features a scan speed of 85...

    This LV4 series linear imaging bar code scanner module features a scan speed of 85 scans/sec with small footprint to meet all applications.  Built-in LED, Software commands...

  • 5.5*2.1mm Standard DC Socket Module with LED Indicator 2 Channel Output DC Power Supply for Arduino 5V 9V 12V
    Available
    DC Power Socket Module with LED Indicator 5.5*2.1mm _A1135

    Size:5.5*2.1mmDC socket module, socket type 5.5x2.1 (most common standard). VCC presence witness LED. Traversing pads (holes) so a cable can be soldered in addition to the standard 2.54 square section male headers, whic are doubled on outputs (2 for VCC and 2 for ground).

    Size:5.5*2.1mmDC socket module, socket type 5.5x2.1 (most common standard). VCC...

    Size:5.5*2.1mmDC socket module, socket type 5.5x2.1 (most common standard). VCC presence witness LED. Traversing pads (holes) so a cable can be soldered in addition to the...

  • LM2577 DC-DC Adjustable Step-up Power Converter Module
    Available
    2.5A Boost LM2577 DC-DC Adjustable Step-up Power Converter Module _A1125

    Module Properties: non-isolated step-up module Input voltage :3-34V Output voltage: continuously adjustable (4-35V) Output Current: 2.5A (MAX) more detail given below

    Module Properties: non-isolated step-up module Input voltage :3-34V Output voltage:...

    Module Properties: non-isolated step-up module Input voltage :3-34V Output voltage: continuously adjustable (4-35V) Output Current: 2.5A (MAX) more detail given below

  • Out of stock
    Android Phone Control 4 Channel Relay Module Bluetooth 4.0 BLE for IOT _A1119

    Bluetooth switch module, enabling Android phoneThe main performance parameters:Input voltage: 5V, 12V Apple app:please search TwoSwitchBle in app storeandroid source code :https://www.adrive.com/public/Chqt4v/FZ1696-bttrschange.zipapple source code https://www.adrive.com/public/DPEAxB/FZ1696-iOS.zipApps: https://www.adrive.com/public/ykRFCw/ZL-RC02D_en.apk

    Bluetooth switch module, enabling Android phoneThe main performance parameters:Input...

    Bluetooth switch module, enabling Android phoneThe main performance parameters:Input voltage: 5V, 12V Apple app:please search TwoSwitchBle in app storeandroid source code...

    ₨ 2,300
    Add to cart View
  • PAM8403 power amplifier board
    Out of stock
    PAM8403 Audio Power Amplifier Board _A1117

    Operating voltage: 2.5V-5 V Maximum output power: 3W*2(5V 4Ω) Built with switch Potentiometer, can adjust the volume & control power switch freely. Flexible assembly usage. Power positive and negative can not be reversed, the power supply voltage must not exceed 5.5V, two violations could result in damage to the IC. more detail given below

    Operating voltage: 2.5V-5 V Maximum output power: 3W*2(5V 4Ω) Built with switch...

    Operating voltage: 2.5V-5 V Maximum output power: 3W*2(5V 4Ω) Built with switch Potentiometer, can adjust the volume & control power switch freely. Flexible assembly usage....

    ₨ 150
    Add to cart View
  • EMG-EKG-EEG SHIELD
    Out of stock
    EMG ECG Arduino Shield with Electrode Prob _A1114

    This is an ECG/EMG shield which allows Arduino like boards to capture Electrocardiography Electromiography signals. The shield opens new possibilities to experiment with bio feedback. You can monitor your heartbeat and log  Manual: https://www.olimex.com/Products/Duino/Shields/SHIELD-EKG-EMG/resources/SHIELD-EKG-EMG.pdf more detail given below

    This is an ECG/EMG shield which allows Arduino like boards to capture...

    This is an ECG/EMG shield which allows Arduino like boards to capture Electrocardiography Electromiography signals. The shield opens new possibilities to experiment with bio...

    ₨ 4,500
    Add to cart View
  • IR Infrared Obstacle Avoidance Sensor for Arduino Smart Car Robot
    Available
    IR Infrared Obstacle Avoidance Sensor _A1110

    The sensor module light is adaptable to the environment, it has a pair of infrared transmitting and receiving tube, tube infrared emit a certain frequency, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving tube, after the comparator circuit processing, 

    The sensor module light is adaptable to the environment, it has a pair of infrared...

    The sensor module light is adaptable to the environment, it has a pair of infrared transmitting and receiving tube, tube infrared emit a certain frequency, when detecting...

  • IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V
    Available
    IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V _A1108

    If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V.

    If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge...

    If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun logic level converter is a small device that safely steps down 5V...

  • MT3608 2A Max DC-DC Step Up Power Module Booster Power Module For Arduino
    Available
    2A Booster DC-DC Step Up Power Module _A1106

    Model: MT3608The maximum output current: 2 aInput voltage: 2 v ~ 24 vThe maximum output voltage: > 5 v - 28 vEfficiency: > 93%Mechanical properties:Product size: 36 mm * 17 mm * 14 mm

    Model: MT3608The maximum output current: 2 aInput voltage: 2 v ~ 24 vThe maximum output...

    Model: MT3608The maximum output current: 2 aInput voltage: 2 v ~ 24 vThe maximum output voltage: > 5 v - 28 vEfficiency: > 93%Mechanical properties:Product size: 36 mm *...

  • TDA8932 35W Audio Amplifier Board Module
    Out of stock
    High Power 35W Audio Amplifier Board Module _A1101

    Speaker Impedance: 4-8 ohm Circuit structure: mono output Operating voltage: DC10v ~ 30V Output Power: 35W Recommended voltage:12-24V Board size :( length x width x height) 5.15x3.2x1cm Datasheet: http://www.haoyuelectronics.com/Attachment/TDA8932-Amplifier-Board/TDA8932B.pdf

    Speaker Impedance: 4-8 ohm Circuit structure: mono output Operating voltage: DC10v ~...

    Speaker Impedance: 4-8 ohm Circuit structure: mono output Operating voltage: DC10v ~ 30V Output Power: 35W Recommended voltage:12-24V Board size :( length x width x height)...

    ₨ 800
    Add to cart View
  • IR Infrared Motion Sensor Automatic Light Lamp Switch 110V - 250V
    Available
    IR Infrared Motion Sensor Automatic Light Lamp Switch 250V _A1098

    Color: White- ABS material- Automatic IR motion sensor switch- Automatic turn on/off while detected people come or left- Detecting Range: 140 degree cone angle (within 7 meters)- Voltage: AC 110~250V (50~60Hz)- Working temperature: -20~+50'C- Static power: Less than 0.06W- Resistive load Power: 200W more given below

    Color: White- ABS material- Automatic IR motion sensor switch- Automatic turn on/off...

    Color: White- ABS material- Automatic IR motion sensor switch- Automatic turn on/off while detected people come or left- Detecting Range: 140 degree cone angle (within 7...

  • Sharp IR Sensor GP2Y0A51SK0F  Measuring Detecting Distance 2 to 15 cm for Arduino
    Available
    Proximity Sharp IR Sensor GP2Y0A51SK0F 2-15cm _A1095

    The GP2Y0A51SK0F is the shortest-range Sharp analog distance sensor we carry, featuring a detection range of 0.8″ to 6″ (2 cm to 15 cm). The shorter range gives you higher resolution measurements, and the low minimum detection distance makes this sensor great for detecting very close objects. The distance is indicated by an analog voltage, making this sensor very easy to use. More detail below

    The GP2Y0A51SK0F is the shortest-range Sharp analog distance sensor we carry, featuring...

    The GP2Y0A51SK0F is the shortest-range Sharp analog distance sensor we carry, featuring a detection range of 0.8″ to 6″ (2 cm to 15 cm). The shorter range gives you higher...

  • Si4703 FM Tuner Evaluation Board
    Available
    Si4703 FM Receiver Tuner Evaluation Board _A1083

    Description: This is an evaluation board for the Silicon Laboratories Si4703 FM tuner chip. Beyond enabling you to tune in to FM radio stations, the Si4703 is also capable of detecting and processing both Radio Data Service (RDS) and... More detail given below

    Description: This is an evaluation board for the Silicon Laboratories Si4703 FM tuner...

    Description: This is an evaluation board for the Silicon Laboratories Si4703 FM tuner chip. Beyond enabling you to tune in to FM radio stations, the Si4703 is also capable of...

  • Digital Portable Electronic Kitchen Scale Load Cell Weight Weighing Sensor 2KG
    Available
    2 Kg Digital Portable Electronic Kitchen Scale Load Cell Weight Sensor _A1073

    Four leads, easy to use,5-10V drive voltage applied, the force is directly output as a voltage change signal.Dimensions: 12.7mm * 12.7mm * 80mm

    Four leads, easy to use,5-10V drive voltage applied, the force is directly output as a...

    Four leads, easy to use,5-10V drive voltage applied, the force is directly output as a voltage change signal.Dimensions: 12.7mm * 12.7mm * 80mm

  • Available
    Laser Sensor Module Receiver _A1069

    Features:PCB size: 1.5 x 1.9cmWorking voltage: 5VOutput high level when receive laser signalOutput low level when not receive laser signalNote:The sensor uses a non-modulated laser receiver, please use indoors where no light, sunlight or other fixtures may interfere, recommended for use in dark environments.Package included:1 x Laser sensor module 

    Features:PCB size: 1.5 x 1.9cmWorking voltage: 5VOutput high level when receive laser...

    Features:PCB size: 1.5 x 1.9cmWorking voltage: 5VOutput high level when receive laser signalOutput low level when not receive laser signalNote:The sensor uses a non-modulated...

  • Available
    SOT89/SOT223 To DIP Adapter Board _A1061

    50pcs SOT89 To DIP SOT223 To DIP Adapter Board Transfer Plate Pinboard 1.5mm Pitch Pin Space Test PCB Electronic Circuirt Board 1.5mm pitchDescription:SOT223(Pitch 2.3mm)to SIP3(2.54pin pitch)

    50pcs SOT89 To DIP SOT223 To DIP Adapter Board Transfer Plate Pinboard 1.5mm Pitch Pin...

    50pcs SOT89 To DIP SOT223 To DIP Adapter Board Transfer Plate Pinboard 1.5mm Pitch Pin Space Test PCB Electronic Circuirt Board 1.5mm pitchDescription:SOT223(Pitch 2.3mm)to...

  • TEMT6000 Ambient light sensor
    Available
    TEMT6000 Ambient Light Sensor Module _A1059

    Description: Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don’t. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin. Documents: Datasheet Wiring Example Bildr Tutorial 

    Description: Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you...

    Description: Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don’t. Sensor acts like a transistor - the greater the incoming light,...

  •  3.5MM Audio Socket
    Out of stock
    3.5MM Audio Socket module _A1058

    3.5mm Audio Socket Stereo Sound Module w/ Mic for MP3 Player – RedDescription:The audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for "Tip, Ring, Ring, Sleeve," which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone. 

    3.5mm Audio Socket Stereo Sound Module w/ Mic for MP3 Player – RedDescription:The...

    3.5mm Audio Socket Stereo Sound Module w/ Mic for MP3 Player – RedDescription:The audio-style connectors that you see on some phones, MP3 players and development boards. TRRS...

    ₨ 80
    Add to cart View
  • HT16K33 dot matrix LED driver control module
    Available
    HT16K33 Dot Matrix LED Driver Control Module _A1056

    The HT16K33 is a memory mapping and multi-function LED controller driver. The max. Display segment numbers in the device is 128 patterns (16 segments and 8 commons) with a 13*3 (MAX.) matrix key scan circuit. The software configuration More detail given below

    The HT16K33 is a memory mapping and multi-function LED controller driver. The max....

    The HT16K33 is a memory mapping and multi-function LED controller driver. The max. Display segment numbers in the device is 128 patterns (16 segments and 8 commons) with a 13*3...

  •  Proximity and contactless gesture detection APDS-9930
    Available
    RGB , Proximity and Contactless Gesture Detection APDS-9930 Module _A1055

    APDS-9930 provides an I²C-compatible interface in a single 8-pin package ambient light sensor (ALS, Ambient Light Sensor) and proximity sensor with infrared LED`s, where ambient light sensor is approximated using a dual LED illumination 0.01 lux under low lumens human visual response performance, high sensitivity can be provided.. More detail given below

    APDS-9930 provides an I²C-compatible interface in a single 8-pin package ambient light...

    APDS-9930 provides an I²C-compatible interface in a single 8-pin package ambient light sensor (ALS, Ambient Light Sensor) and proximity sensor with infrared LED`s, where ambient...

  • Expansion Board For Nextion Enhanced Display I/O Extended
    Out of stock
    Input/Output (Keypad / Buzzer) Expansion interface board for Nextion TFT Display _A1044

    The first expansion board for Nextion Enhanced HMI displays. Enhanced and higher version Nextion displays support 8 GPIO, thus we can use this expansion board to control Nextion. The board has 6 buttons, which include Esc, Enter, Left, Right, UP, Down. Also, indicating buzzer and LEDs are includedNote: this expansion board can only work with Nextion Enhanced Display, not for basic Nextion Display

    The first expansion board for Nextion Enhanced HMI displays. Enhanced and higher...

    The first expansion board for Nextion Enhanced HMI displays. Enhanced and higher version Nextion displays support 8 GPIO, thus we can use this expansion board to control...

    ₨ 250
    Add to cart View
  • IC clamp SOIC8 SOP8 IC Clip +1 adapter Universal For 24C 93C 25 series SOIC SOP Chips
    Available
    IC clamp SOIC8 SOP8 IC Clip +1 adapter Universal For 24C 93C 25 series SOIC SOP Chips _A1039

    Features:100% brand new and high qualityThis item for sop8 chip ,such as 25**, 24c** , 93c** and so on .It can be used for the online in-circuit sop8 -dip8 adapter ,it is used for a sop8 chip programming that has been soldered on circuit board , it can online programming the sop8 chip , do not need take the chip of the circuit board , so it can save people's time More detail given below

    Features:100% brand new and high qualityThis item for sop8 chip ,such as 25**, 24c** ,...

    Features:100% brand new and high qualityThis item for sop8 chip ,such as 25**, 24c** , 93c** and so on .It can be used for the online in-circuit sop8 -dip8 adapter ,it is used...

  •  INA219 DC Current Sensor Breakout 26V INA219B High Side I2C Address
    Available
    INA219 26V DC I2C Base Current Sensor _A1036

    This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measures both the high side voltage and DC current draw over I2C with 1% precision. More detail given below

    This breakout board will solve all your power-monitoring problems. Instead of...

    This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both...

  • HDC1008 Temperature Humidity Sensor Breakout Board for Arduino
    Available
    HDC1008 Temperature Humidity Sensor Module _A1034

    It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out at a perfectly reasonable 52% when it feels more like 77%. Enter the HDC1008 Temperature + Humidity Sensor - the best way to prove the weatherman wrong! More detail given below

    It's summer and you're sweating and your hair's all frizzy and all you really want to...

    It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out...

  • MAX471 Voltage Current Volt Amp Test Sensor Module for Arduino
    Available
    GY - 471 MAX471 Voltage and Current Sensor Module _A1033

    This module can be used to test the current and voltage.The principle of voltage test based on the principle of resistive voltage divider design can make the red terminal connector input voltage to 5 times smaller. Arduino analog input voltages up to 5 v, the voltage detection module input voltage not greater than 5Vx5=25V (if using 3.3V systems, More detail given below

    This module can be used to test the current and voltage.The principle of voltage test...

    This module can be used to test the current and voltage.The principle of voltage test based on the principle of resistive voltage divider design can make the red terminal...

  • ADS1015 12 bit Precision Analog to Digital Converter ADC for Arduino Development Board
    Available
    ADS1015 12 bit ADC Precision Analog to Digital Converter Module _A1032

    For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels or two differential channels. More detail given below

    For microcontrollers without an analog-to-digital converter or when you want a...

    For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The...

  •  5V Loop Delay Switch Relay Module
    Available
    5V Loop Delay Switch Relay Module _A1031

    Application: Module is energized, the relay simultaneously pull, then disconnect , a cycle , often used in machine cycle start, stop , product life testing , component life testing, automation equipment control , PLC control, electronic experiments. More detail given below

    Application: Module is energized, the relay simultaneously pull, then disconnect , a...

    Application: Module is energized, the relay simultaneously pull, then disconnect , a cycle , often used in machine cycle start, stop , product life testing , component life...

  • 5V Multi-function Delay Relay Module with Digital Display Adjustable Power Supply Circulation High and Low Level
    Available
    5V Multi-function Delay Relay Module with Digital Display _A1030

    Features:This product have power-on trigger delay and cycle time delay, high /low level trigger delay and self-lock functions,with digital display and  accurate delay, 18 features optional, it can connect to maximum  220V 10A AC load or 30V 10A DC , is widely used for smart home automation, product life testing, electronic design and .. more detail given below

    Features:This product have power-on trigger delay and cycle time delay, high /low level...

    Features:This product have power-on trigger delay and cycle time delay, high /low level trigger delay and self-lock functions,with digital display and  accurate delay, 18...

  • 5V Single Key Start-Stop Self-locking Relay Module
    Available
    5V Single Key Start-Stop Self-locking Relay Module

    1. The power supply:  5V 2. Module size:   52.8mm x 32mm x 18mm 3. According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, and then press the button to disconnect, low level trigger.  Power on again when the relay is in off state... .more detail given below

    1. The power supply:  5V 2. Module size:   52.8mm x 32mm x 18mm 3. According to the...

    1. The power supply:  5V 2. Module size:   52.8mm x 32mm x 18mm 3. According to the board of the key, or an external button to make the relay module to attract or disconnect,...

  • Available
    GY-9960-LLC APDS-9960 Non-contact proximity Gesture Detection Sensor Module _A1026

    The APDS-9930 provides digital ambient light sensing (ALS), IR LED and a complete proximity detection system in a single 8 pin package. The proximity function offers plug and play detection to 100 mm (without front glass) thus eliminating the need for factory calibration of the end equipment or sub-assembly. .. more detail given below

    The APDS-9930 provides digital ambient light sensing (ALS), IR LED and a complete...

    The APDS-9930 provides digital ambient light sensing (ALS), IR LED and a complete proximity detection system in a single 8 pin package. The proximity function offers plug and...

  • TIP41C TIP41 Power Transistor NPN 100V 6A 65W TO-220 Transistors
    Out of stock
    TIP41C TIP41 Power Transistor NPN 100V 6A 65W TO-220 Transistors _A0887

    Current - Collector Cutoff (Max): 700 & micro; A The maximum collector current - Base DC voltage: 120V max Emitter DC voltage: 100V max Base DC voltage: 5V max Most significant junction temperature: 150 degrees Celsius maximum Package: DIP TO-220 package

    Current - Collector Cutoff (Max): 700 & micro; A The maximum collector current -...

    Current - Collector Cutoff (Max): 700 & micro; A The maximum collector current - Base DC voltage: 120V max Emitter DC voltage: 100V max Base DC voltage: 5V max Most...

    ₨ 20
    Add to cart View
  • LM2576S-ADJ
    Available
    LM2576S-ADJ TO-263 (S) 45V 3-A Step-Down Voltage Regulator _A0901

    datasheet: http://www.ti.com/lit/ds/symlink/lm2576.pdf

    datasheet: http://www.ti.com/lit/ds/symlink/lm2576.pdf

    datasheet: http://www.ti.com/lit/ds/symlink/lm2576.pdf

  • 4.5V-7V to 3.3V AMS1117-3.3V Power Supply Module AMS1117-3.3 Power Supply Module
    Available
    4.5V-7V to 3.3V AMS1117-3.3V Power Supply Module_A0865

    2P single row pin input and outputDual-panel designSpecially designed two rows of needle fixing holes can be fixed directly in the tunnel for the board to extend the experimentInput: DC 4.5V--7V (Input Voltage must be Greater than the Output voltage high above 1V.)Output: 3.3V, 800mA (load current can not exceed 800ma)PCB board size: 2.5cm * 1.1cm

    2P single row pin input and outputDual-panel designSpecially designed two rows of...

    2P single row pin input and outputDual-panel designSpecially designed two rows of needle fixing holes can be fixed directly in the tunnel for the board to extend the...

  • MAX485 Module RS-485 TTL to RS485 MAX485CSA Converter Module For Arduino
    Out of stock
    MAX485 Module RS-485 to TTL Converter Module _A0855

    Features MAX485 chipset; 5.08mm pitch, 2-pin terminals for RS-485 easy communication and wiringSpecification Working voltage: 5VApplication Great for DIY project

    Features MAX485 chipset; 5.08mm pitch, 2-pin terminals for RS-485 easy communication...

    Features MAX485 chipset; 5.08mm pitch, 2-pin terminals for RS-485 easy communication and wiringSpecification Working voltage: 5VApplication Great for DIY project

    ₨ 120
    Add to cart View
  • Hall Effect Hall Switch Sensor Magnetic feild  sensor module_A0872
    Available
    Hall Effect Hall Switch Sensor Magnetic feild sensor module_A0872

    Description:Voltage:3.3V-5VType:A3144Singal output:digital singal outputConnection:5V: postiveGND:negativeOut: power output, it can connect with IO interfacePackage Included:1 X Hall Sensor

    Description:Voltage:3.3V-5VType:A3144Singal output:digital singal outputConnection:5V:...

    Description:Voltage:3.3V-5VType:A3144Singal output:digital singal outputConnection:5V: postiveGND:negativeOut: power output, it can connect with IO interfacePackage Included:1 X...

  • 0.5A Mobile Power Bank Circuit Single 3.7V lithium battery to 5V Boost _A0866
    Available
    0.5A Mobile Power Bank Circuit Single 3.7V lithium battery to 5V Boost _A0866

    Description:Size: 38 * 10 * 4mmCharging voltage: 5VCharging current : 400-500MA become hot during charging is normal.Boost Output: 5VOutput current: 300 ~ 400MA; suitable for use in less demanding situations...more detail below

    Description:Size: 38 * 10 * 4mmCharging voltage: 5VCharging current : 400-500MA become...

    Description:Size: 38 * 10 * 4mmCharging voltage: 5VCharging current : 400-500MA become hot during charging is normal.Boost Output: 5VOutput current: 300 ~ 400MA; suitable for...

  • 10A DC to DC 48V to 12V Converter 120W _A0040
    Out of stock
    10A DC to DC 48V to 12V Converter 120W _A0040

    Power Model: MWX-48-12-120W (MAX) Input voltage: DC48V (wide voltage 30V-60V) Output voltage: DC: 12V, output current: 10A (output current adaptive load current), 120W (MAX) Instantaneous peak current MAX 11A, 10A or less long-term load 100% full power, synchronous rectification, and efficient conversion rate: more than 93% Ripple: 40MV V ...more detail given below

    Power Model: MWX-48-12-120W (MAX) Input voltage: DC48V (wide voltage 30V-60V) Output...

    Power Model: MWX-48-12-120W (MAX) Input voltage: DC48V (wide voltage 30V-60V) Output voltage: DC: 12V, output current: 10A (output current adaptive load current), 120W (MAX)...

    ₨ 4,500
    Add to cart View
  • High Power 10W 900LM LED SMD  White Lamp _A0843
    Available
    High Power 10W 900LM LED SMD White Lamp _A0843

    Description:Power:10W Color Temperature:6000-7000K Luminous: 9000-1000Lm  Beaming Angle:120-140 degreesVoltage:DC 9-12V Current:900mA Life: Above 100,000 hoursWorking Temperature:-20 to 60 degreeStorage Temperature: 20 to 60 degreePackage Included:10 X 10W LED Bulb 

    Description:Power:10W Color Temperature:6000-7000K Luminous: 9000-1000Lm  Beaming...

    Description:Power:10W Color Temperature:6000-7000K Luminous: 9000-1000Lm  Beaming Angle:120-140 degreesVoltage:DC 9-12V Current:900mA Life: Above 100,000 hoursWorking...

  • 5V 650nm 5mW Laser Module _A0826
    Available
    5V 650nm 5mW Laser Module _A0826

    Dot laserOperating voltage: 5VPower: 5MwWavelength: 650n m OD: 6mm Arduino code given below

    Dot laserOperating voltage: 5VPower: 5MwWavelength: 650n m OD: 6mm Arduino code given...

    Dot laserOperating voltage: 5VPower: 5MwWavelength: 650n m OD: 6mm Arduino code given below

  • IRF520 N-Channel MOSFET  Driver Module_A0862
    Available
    IRF520 N-Channel MOSFET Driver Module_A0862

    Description:Size: 33*24mmWeight: 10gVoltage: 3.3V, 5VPorts: Digital LevelOutput load voltage :0-24VOutput load current: <5A (1A above need to add heat sink)Datasheet Link: http://www.irf.com/product-info/datasheets/data/irf520.pdf ...more detail given below

    Description:Size: 33*24mmWeight: 10gVoltage: 3.3V, 5VPorts: Digital LevelOutput load...

    Description:Size: 33*24mmWeight: 10gVoltage: 3.3V, 5VPorts: Digital LevelOutput load voltage :0-24VOutput load current: <5A (1A above need to add heat sink)Datasheet Link:...

  • LM386 Audio Amplifier Module Gain 200 , 5V-12V Input_A0845
    Available
    LM386 Audio Amplifier Module Gain 200 , 5V-12V Input_A0845

    Description:•    Onboard LM386 Chip•    20 multiplier benefits circuit design•    on-board speaker wiring Block•    on-board 10K variable resistor, you can adjust the volume of the enlarged•    Onboard power indicator•    the chip pin leads, can be directly input audio signal•    Operating voltage: 5 ~ 12VPackage Included:1x LM386 Audio Amplifier Module

    Description:•    Onboard LM386 Chip•    20 multiplier benefits circuit design•...

    Description:•    Onboard LM386 Chip•    20 multiplier benefits circuit design•    on-board speaker wiring Block•    on-board 10K variable resistor, you can adjust the volume of...

  • Gas Sensor (NH3,NOx, alcohol, Benzene, Smoke,CO2 ,etc.)_A0932
    Out of stock
    Gas Sensor (NH3,NOx, alcohol, Benzene, Smoke,CO2 ,etc.)_A0932

    FEATURES: Wide detecting scope Fast response and High sensitivity Stable and long life Simple drive circuitAPPLICATION:They are used in air quality control equipments for buildings/offices, are suitable for detecting of NH3,NOx, alcohol, Benzene, smoke,CO2 ,etc.Datasheet Link: https://www.olimex.com/Products/Components/Sensors/SNS-MQ135/resources/SNS-MQ135.pdf ...more detail given below

    FEATURES: Wide detecting scope Fast response and High sensitivity Stable and long life...

    FEATURES: Wide detecting scope Fast response and High sensitivity Stable and long life Simple drive circuitAPPLICATION:They are used in air quality control equipments for...

    ₨ 350
    Add to cart View
  • MG-811 CO2 Carbon Diaoxide Gas Sensor Module W/ Analog TTL Level  Temperature Compensated Output _A0912
    Out of stock
    MG-811 CO2 Carbon Diaoxide Gas Sensor Module W/ Analog TTL Level Temperature Compensated Output _A0912

    Features: Has a signal output instructionsDual signal output (analog output, and TTL-level output)TTL output valid signal is low. (When output low signal light can be directly connected to the microcontroller) Analog output (0 ~ 2V / 0-4V) voltage output selectable default hair 0-2VCarbon dioxide has a high sensitivity and good selectiv....more detail given below

    Features: Has a signal output instructionsDual signal output (analog output, and...

    Features: Has a signal output instructionsDual signal output (analog output, and TTL-level output)TTL output valid signal is low. (When output low signal light can be directly...

    ₨ 8,000
    Add to cart View
  • LDR Photoswitch Photoresistor 12V Relay Module_A0861
    Available
    LDR Photoswitch Photoresistor 12V Relay Module_A0861

    Features Apply photosensitive resistance to induct the intensity of the light, can directly control the load with attached relay module With a potentiometer to adjust the sensitivity, set the start relay thresholds Output type: Directly connect AC 220V 10A or DC30V 10A With 4pcs fixed screw holes, convenient to install PCB size: 5*2.6cm (L*W) Using wide voltage LM393 comparator

    Features Apply photosensitive resistance to induct the intensity of the light, can...

    Features Apply photosensitive resistance to induct the intensity of the light, can directly control the load with attached relay module With a potentiometer to adjust the...

  • DC 0-100V DC Digital Voltmeter Meter 0.56 " Red Color _A0857
    Available
    DC 0-100V DC Digital Voltmeter Meter 0.56 " Red Color _A0857

    Description:The voltmeter compact , range DC DC0-100V, need external auxiliary power supply. Auxiliary supply voltage range wide, up to 4.5-30V, can work at 5V, 9V, 12V, 24V , etc., without regulation. With three wiring, easy access to car / battery car / motorcycle car lines, with reverse polarity protection, line ....more detail given below

    Description:The voltmeter compact , range DC DC0-100V, need external auxiliary power...

    Description:The voltmeter compact , range DC DC0-100V, need external auxiliary power supply. Auxiliary supply voltage range wide, up to 4.5-30V, can work at 5V, 9V, 12V, 24V ,...

  • 0-300V (4.5-30v Input) Green YB27 Voltmeter Voltage Meter 3 Wire_A0880
    Out of stock
    0-300V (4.5-30v Input) Green YB27 Voltmeter Voltage Meter 3 Wire_A0880

    Measuring range:DC 0-300V (two wires access) Current consumption: 5-15mA(generally), less than 20mA Display: three 0.56″ LED digital tube Display Color: Green Allowable error:1% (+/- 1 digit)

    Measuring range:DC 0-300V (two wires access) Current consumption: 5-15mA(generally),...

    Measuring range:DC 0-300V (two wires access) Current consumption: 5-15mA(generally), less than 20mA Display: three 0.56″ LED digital tube Display Color: Green Allowable error:1%...

    ₨ 450
    Add to cart View
  • MAX9812 Based Microphone Sound Amplifier Module _A0898
    Out of stock
    MAX9812 Based Microphone Sound Amplifier Module _A0898

    Description: Professional Microphone amplification IC, low output noise, small size, high sensitivity, fixed gain 20dB, support 3.3v and 5v two power supply. Voltage: 3-5VOUT Output: The default output analog signals.Size: 15mm * 9mm

    Description: Professional Microphone amplification IC, low output noise, small size,...

    Description: Professional Microphone amplification IC, low output noise, small size, high sensitivity, fixed gain 20dB, support 3.3v and 5v two power supply. Voltage: 3-5VOUT...

    ₨ 250
    Add to cart View
  • Male A-USB to DIP Pinboard 4-Pin 2.54 2.54mm _A0916
    Available
    Male A-USB to DIP Pinboard 4-Pin 2.54 2.54mm _A0916

    Description: At present, mobile phone charger is everywhere, this module is used to convert the charger or computer USB port for conventional DIP2.54mm pin, a great convenience for your applicationPackage Included:1 X Male A-USB to DIP Pinboard

    Description: At present, mobile phone charger is everywhere, this module is used to...

    Description: At present, mobile phone charger is everywhere, this module is used to convert the charger or computer USB port for conventional DIP2.54mm pin, a great convenience...

  • MICRO USB to DIP Adapter 5pin Female Connector B Type _A0915
    Available
    MICRO USB to DIP Adapter 5pin Female Connector B Type _A0915

    Description:Base Material:FR4.Board Thickness:1.6mmPackage Included:1 X MICRO USB to DIP Adapter

    Description:Base Material:FR4.Board Thickness:1.6mmPackage Included:1 X MICRO USB to...

    Description:Base Material:FR4.Board Thickness:1.6mmPackage Included:1 X MICRO USB to DIP Adapter

  • MCP4725 I2C 12-Bit DAC w/I2C Interface Breakout Board Module  GY4785_ A0914
    Available
    MCP4725 I2C 12-Bit DAC w/I2C Interface Breakout Board Module GY4785_ A0914

    Description:This version of the MCP4725 Breakout fixes a few issues with the board including the IC footprint, the I2C pinout, changes the overall board dimensions to better fit your projects, and a few more minor tweaks. This board breaks out each pin you will need to access and use the MCP4725 including GND and Signal OUT pin...more detail given below

    Description:This version of the MCP4725 Breakout fixes a few issues with the board...

    Description:This version of the MCP4725 Breakout fixes a few issues with the board including the IC footprint, the I2C pinout, changes the overall board dimensions to better fit...

  • HX711 Weight / Load Sensors AD Module _A0860
    Available
    HX711 Weight / Load Sensors AD Module _A0860

    The module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog input channels, the internal programmable gain amplifier integrated multiplier 128. The input circuit can be configured to provide a bridge voltage electrical bridge (such as pressure, weight) sensor model is an ideal high-precision, 

    The module uses 24 high-precision A / D converter chip hx711, is designed for...

    The module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog input channels, the internal...

  • EEPROM I2C base AT24C256  Memory Module _A0858
    Out of stock
    EEPROM I2C base AT24C256 Memory Module _A0858

    1- 8P onboard chip holder, install AT24C256 chip; 2 -pin power supply, on-board power indicator;3 -onboard I2C communications required pull-up resistor;4 -All pins are drawn and marked, and the address input pins can directly write protection jumper settings;5-PCB board Dimensions: 36.5 (mm) x12 (mm)

    1- 8P onboard chip holder, install AT24C256 chip; 2 -pin power supply, on-board power...

    1- 8P onboard chip holder, install AT24C256 chip; 2 -pin power supply, on-board power indicator;3 -onboard I2C communications required pull-up resistor;4 -All pins are drawn and...

    ₨ 240
    Add to cart View
  • Photosensitive Resistor LDR Light Sensor Module _A0831
    Out of stock
    Photosensitive Resistor LDR Light Sensor Module _A0831

    Description:Sensitive sensors using photoresistorThe comparator output signal clean, good waveform, driving ability, more than 15mA.With adjustable potentiometer to adjust the brightness of the light detectionOperating voltage 3.3V-5VOutput Type: Digital switching output (0 and 1)With fixed bolt hole for easy installationSmall PCB  ... more detail given below

    Description:Sensitive sensors using photoresistorThe comparator output signal clean,...

    Description:Sensitive sensors using photoresistorThe comparator output signal clean, good waveform, driving ability, more than 15mA.With adjustable potentiometer to adjust the...

    ₨ 110
    Add to cart View
  • Battery Level Indicator KA2284 /Power Line Voltage level Indicator _A0868
    Available
    Battery Level Indicator KA2284 /Power Line Voltage level Indicator _A0868

    KA2284 Power level indicator Battery Pro Audio level indicator module M70 Chip: KA2284 Supply voltage: 3.5V-12V; The magnitude of the level can be adjusted;- AC and DC signals can be controlled by jumper;- PCB board size: 29 (mm) x21 (mm)- Weight: 7 g

    KA2284 Power level indicator Battery Pro Audio level indicator module M70 Chip: KA2284...

    KA2284 Power level indicator Battery Pro Audio level indicator module M70 Chip: KA2284 Supply voltage: 3.5V-12V; The magnitude of the level can be adjusted;- AC and DC signals...

  • Carbon Monoxide Gas Sensor Module _A0929
    Available
    Carbon Monoxide Gas Sensor Module _A0929

    Description:  MQ-9 sensitive material used is a gas sensor in a clean air, the lower the conductivity of tin dioxide (SnO2). Detection method using low temperature cycling (1.5V heating) to detect carbon monoxide, the conductivity of the sensor increases with the increase of carbon monoxide in air gas concentration, stray adsorb...more detail given below

    Description:  MQ-9 sensitive material used is a gas sensor in a clean air, the lower...

    Description:  MQ-9 sensitive material used is a gas sensor in a clean air, the lower the conductivity of tin dioxide (SnO2). Detection method using low temperature cycling (1.5V...

  • (0V -200V/ 50A-100A) Volt and Ampere Meter Red and Blue Display  YB27VA  _A0881
    Available
    (0V -200V/ 50A-100A) Volt and Ampere Meter Red and Blue Display YB27VA _A0881

    Input Power: DC 4.5 - 30 v measure voltage: dc 0-300 v voltage <100 V, resolution: 0.1 v voltage> = 100 v, resolution: 1 v measure current: 50A - 100A  ( require shunt to measure the current, please check the image description for the reference link) current resolution: 0.1a Operating Current: <20ma Display: 0:28 "led, in two colors, red and blue size: 48 x 29 x 21 mm

    Input Power: DC 4.5 - 30 v measure voltage: dc 0-300 v voltage <100 V, resolution:...

    Input Power: DC 4.5 - 30 v measure voltage: dc 0-300 v voltage <100 V, resolution: 0.1 v voltage> = 100 v, resolution: 1 v measure current: 50A - 100A  ( require shunt to...

  • Available
    LPG Iso-butane, Propane Gas Sensor _A0930

    Description: This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistanc detail given below

    Description: This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for...

    Description: This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6...

  • 24 LEDs Bright  Head Light-Blue for Multicopter _A0944
    Available
    24 LEDs Bright Head Light-Blue for Multicopter _A0944

    Features:This 24 LED head light kit is designed for DJI Phantom 2/2 vision/2 vision+. With the help of this light kit, you can enjoy your night flying. Adopts efficient LED lights design, energy-saving and cost-effective. Velcro connection, easy installation and operation. Specification:Type: 24 LED Head Light Kit.Light color: BlueSuitable for: DJI Phantom 2 / 2 Vision / 2 Vision+ 

    Features:This 24 LED head light kit is designed for DJI Phantom 2/2 vision/2 vision+....

    Features:This 24 LED head light kit is designed for DJI Phantom 2/2 vision/2 vision+. With the help of this light kit, you can enjoy your night flying. Adopts efficient LED...

  • 5V 3A 6S Power Distributor Board W/ Adjustable BEC Output _A0956
    Available
    5V 3A 6S Power Distributor Board W/ Adjustable BEC Output _A0956

    Features:Dual BEC strip of electrical output, with thick copper, immersion gold surface treatment, the maximum current through the support 100A, dual high efficiency BEC circuit structure, support 6S lithium input, one factory that is 12V, the other way using available transfer mode, the user can adjust their practical needs, support for 3-20V adjust...more detail given below

    Features:Dual BEC strip of electrical output, with thick copper, immersion gold surface...

    Features:Dual BEC strip of electrical output, with thick copper, immersion gold surface treatment, the maximum current through the support 100A, dual high efficiency BEC circuit...

  • NodeMCU Devkit 2.0 Kit _A0998
    Out of stock
    NodeMCU Devkit 2.0 Kit _A0998

    Description:NodeMCU is an open source IoT platform.It uses the Lua scripting language. It is based on the eLua project, and built on the ESP8266 SDK 0.9.5. It uses many open source projects, such as lua-cjson,and spiffs. It includes firmware which runs on the ESP8266 Wi-Fi SoC, and hardwarewhich is based on the ESP-12 module.... more detail given 

    Description:NodeMCU is an open source IoT platform.It uses the Lua scripting language....

    Description:NodeMCU is an open source IoT platform.It uses the Lua scripting language. It is based on the eLua project, and built on the ESP8266 SDK 0.9.5. It uses many open...

    ₨ 1,300
    Add to cart View
  • 20A Brush (DC ) Motor Speed Controller w/ Brake ESC _A0967
    Available
    20A Brush (DC ) Motor Speed Controller w/ Brake ESC _A0967

    Specification:1pcs 20A brush speed controller.Function: forward, reverse, brakeworking voltage: 3.0V---9.4V.Diaensions(L*W*H): 35.0*22.0*6.0mmCurrent(A): 20ADriver frequency: 2KHzInput: Li-Po 2S / Ni-Mh/Ni-cd 4-7cellConstant current 20A Max 25A< 30s Pulsed 50A< 5sBrake On / with brakeThis ESC can work with 130/180/260/280/380 Brush MotorSize:20*20 MM

    Specification:1pcs 20A brush speed controller.Function: forward, reverse, brakeworking...

    Specification:1pcs 20A brush speed controller.Function: forward, reverse, brakeworking voltage: 3.0V---9.4V.Diaensions(L*W*H): 35.0*22.0*6.0mmCurrent(A): 20ADriver frequency:...

  • 3 Channel / Way Video Switch Module for FPV _A0972
    Available
    3 Channel / Way Video Switch Module for FPV _A0972

    This tiny device is a great accessory for any FPV model and switches the view between two different cameras on command or automatically in case of camera failure.It has in-built micro-controller simultanously checks the last ten PPM signals for glitches within the signal for errors. It will automatically change the view from Camera "A" ... more detail given below

    This tiny device is a great accessory for any FPV model and switches the view between...

    This tiny device is a great accessory for any FPV model and switches the view between two different cameras on command or automatically in case of camera failure.It has in-built...

  • Two-axis BGC 3.0 MOS Gimbal Controller Driver Board_A0954
    Out of stock
    Two-axis BGC 3.0 MOS Gimbal Controller Driver Board_A0954

    Features:BGC 3.0 MOS Large Current 2-axis Brushless Gimbal Controller DriverAdopts MOS tube drive, with larger currentTwo-axis brushless gimbal driverSupport 2-8 series gimbal motorSpecifications:Drive mode: MOSSize: 5*5cmPeak current: 10A

    Features:BGC 3.0 MOS Large Current 2-axis Brushless Gimbal Controller DriverAdopts MOS...

    Features:BGC 3.0 MOS Large Current 2-axis Brushless Gimbal Controller DriverAdopts MOS tube drive, with larger currentTwo-axis brushless gimbal driverSupport 2-8 series gimbal...

    ₨ 2,400
    Add to cart View
  • Power Module w/BEC for APM 2.5/2.6/2.8 Ardupilot (90A) _A0948
    Out of stock
    Power Module w/BEC for APM 2.5/2.6/2.8 Ardupilot (90A) _A0948

    Specifications:Max input voltage: 30VMax current sensing: 90A Size:25*21*9mmNet weight:25gWeight :35gVoltage and current measurement configured for 5V ADCSwitching regulator outputs 5.3V and 3A max6-pos DF13 cable plugs directly to ...more detail given below

    Specifications:Max input voltage: 30VMax current sensing: 90A Size:25*21*9mmNet...

    Specifications:Max input voltage: 30VMax current sensing: 90A Size:25*21*9mmNet weight:25gWeight :35gVoltage and current measurement configured for 5V ADCSwitching regulator...

    ₨ 1,450
    Add to cart View
  • CNC Router Single 1 Axis Controller Stepper Motor Driver TB6560 3A Driver Board _A0990
    Available
    CNC Router Single 1 Axis Controller Stepper Motor Driver TB6560 3A Driver Board _A0990

    Description:Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx)Rated maximum output: ± 3A, peak 3.5A.Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply.Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance...more detail given below

    Description:Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx)Rated maximum...

    Description:Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx)Rated maximum output: ± 3A, peak 3.5A.Working voltage DC 10V-35V. Recommended to use a switching power supply...

  • MinimOSD On-Screen Display OSD Board for APM / Pixhawk  Ardupilot_A0982
    Available
    MinimOSD On-Screen Display OSD Board for APM / Pixhawk Ardupilot_A0982

    Features:Perfect combination of ATmega328 and MAX7456.Flight control OS functions Supports MAVLink protocol.Uses MAVLink OSD.Supports pirate APM2.52 APM 2.6 flight model ... more detail given below

    Features:Perfect combination of ATmega328 and MAX7456.Flight control OS functions...

    Features:Perfect combination of ATmega328 and MAX7456.Flight control OS functions Supports MAVLink protocol.Uses MAVLink OSD.Supports pirate APM2.52 APM 2.6 flight model ......

  • 16 Channel 12-bit PWM SERVO DRIVER _A0899
    Available
    16 Channel 12-bit PWM SERVO DRIVER _A0899

    If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, the limited PWM outputs of your microcontroller would be a big problem for you. To overcome this problem, the only thing you should do is to get an Adafruit 16-Channel 12-Bit PWM/Servo Driver...detail below

    If you want to make a robot which has lots of moving parts or if you want to control...

    If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, the limited PWM outputs of your microcontroller would be a...

  • 5A 75W DC-DC Adjustable Step-down Module _A0908
    Out of stock
    5A 75W DC-DC Adjustable Step-down Module _A0908

    Features:1. LED power indicator.2. Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage; The nixie tube can be turned off by another button. Mentioned states are able to be memorized, is not lost even if the power is disconnected. (On-board marked "IN" LED is turned on, the nixie tube display...detail below

    Features:1. LED power indicator.2. Button to switch measurement of the input or output...

    Features:1. LED power indicator.2. Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage; The...

    ₨ 750
    Add to cart View
  • 10A DC-DC Buck Regulator/Step-down Module (1.2V-32V) Ajustable _A0846
    Available
    10A DC-DC Buck Regulator/Step-down Module (1.2V-32V) Ajustable _A0846

    Module Properties: non-isolated step-down module (BUCK) Synchronous rectification Input voltage :4-32V (limit 36V). Continuously adjustable output voltage :1.2-32V Minimum pressure difference of the input and output: 1V Output current :0-10A  The temperature does not exceed 60 degrees, when the natural cooling 6A for a long time . Please reduc ...detail given below

    Module Properties: non-isolated step-down module (BUCK) Synchronous rectification Input...

    Module Properties: non-isolated step-down module (BUCK) Synchronous rectification Input voltage :4-32V (limit 36V). Continuously adjustable output voltage :1.2-32V Minimum...

  • Out of stock
    30A Single H-Bridge VNH2SP30-Monster Driver Module _A0892

    This is essentially a ramped up version of Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so thi... detail given below 

    This is essentially a ramped up version of Ardumoto motor driver shield. For this...

    This is essentially a ramped up version of Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor...

    ₨ 800
    Add to cart View
  • 30A 250V Relay Module High-side Driver (SLA-05VDC-SL-A) TTL 5V input  _A0867
    Available
    30A 250V Relay Module High-side Driver (SLA-05VDC-SL-A) TTL 5V input _A0867

    Relay Type: SLA-05VDC-SL-ACoil operation voltage: DC 5VContact Voltage: 240VAC/30VDC 30ATotal Size: 47 x 37 x 24mm/1.9" x 1.5" x 0.94"(L*W*T) Mounting Hole Dia: 4mm/ 0.16";Material : PCB, Iron, Plastic

    Relay Type: SLA-05VDC-SL-ACoil operation voltage: DC 5VContact Voltage: 240VAC/30VDC...

    Relay Type: SLA-05VDC-SL-ACoil operation voltage: DC 5VContact Voltage: 240VAC/30VDC 30ATotal Size: 47 x 37 x 24mm/1.9" x 1.5" x 0.94"(L*W*T) Mounting Hole Dia: 4mm/...

  • 16x8 LED Dot Matrix with MAX7219 Driver _A0821
    Available
    8x8 LED Dot Matrix with MAX7219 Driver _A0821

    Description:Module operating voltage: 5VA single module can drive an 8 * 8 common cathode latticeWith four screws hole, aperture 3mm, by using our M3 Tongzhu fixed.Module with input and output interfaces, supports multiple modules cascade...detail given below

    Description:Module operating voltage: 5VA single module can drive an 8 * 8 common...

    Description:Module operating voltage: 5VA single module can drive an 8 * 8 common cathode latticeWith four screws hole, aperture 3mm, by using our M3 Tongzhu fixed.Module with...

  • NRF Serial Convertor ( STC15L204  Wireless Driver Board) _A0864
    Available
    NRF Serial Convertor ( STC15L204 Wireless Driver Board) _A0864

    Description:STC15L2043A ChipVoltage: 3.3VUse for NRF24L01 wireless moduleUART interface, used for UART communication5V to 3.3V Chip, AMS1117-3.3 ChipI/O interface

    Description:STC15L2043A ChipVoltage: 3.3VUse for NRF24L01 wireless moduleUART...

    Description:STC15L2043A ChipVoltage: 3.3VUse for NRF24L01 wireless moduleUART interface, used for UART communication5V to 3.3V Chip, AMS1117-3.3 ChipI/O interface

  • 5V Wireless Charging Module Coil (Transmitter/Receiver) _A0923
    Available
    5V Wireless Charging Module Coil (Transmitter/Receiver) _A0923

    Features:1. Stable power supply2. Insulation Coil3. Space-saving design ...detail given below

    Features:1. Stable power supply2. Insulation Coil3. Space-saving design ...detail given...

    Features:1. Stable power supply2. Insulation Coil3. Space-saving design ...detail given below

  • 16 Channel Relay Module Interface Board _A0833
    Available
    16 Channel Relay Module Interface Board _A0833

    Compatible with arduino etc,  12V relay contact capacity 10A 250V, with optocoupler protection. Onboard power supply module does not need an external power supply. I / O port driver is active low.Used as a microcontroller development board module can be used as appliance control, can be used as PLC extended output...detail given below

    Compatible with arduino etc,  12V relay contact capacity 10A 250V, with optocoupler...

    Compatible with arduino etc,  12V relay contact capacity 10A 250V, with optocoupler protection. Onboard power supply module does not need an external power supply. I / O port...

  • Pulse Sensor (Heart-rate Beats Per Minute)  _A0813
    Out of stock
    Pulse Sensor (Heart-rate Beats Per Minute) _A0813

     Heart rate data can be really useful whether you’re designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart beat. The problem is that heart rate can be difficult to measure. Luckily, the Pulse Sensor Amped can solve that problem!...detail given below

     Heart rate data can be really useful whether you’re designing an exercise routine,...

     Heart rate data can be really useful whether you’re designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart...

    ₨ 650
    Add to cart View
  • MLX90615 Digital Infrared Temperature Sensor GY-90615  _ A0814
    Available
    MLX90615 Digital Infrared Temperature Sensor GY-90615 _ A0814

    Features:Wide Temperature Detecting Range   -40 to 85°C for sensor temperature   -40 to 115°C for object temperatureHigh accuracy of 1°C over wide temperatureMeasurement resolution of 0.02°CEmbedded emissivity compensationPower saving modePower supply:3v-5vSize:10.5*13*9.6 mmCurrent:1ma ...  Documents: https://www.adrive.com/public/XBdCUR/FZ1688-GY90615.rar

    Features:Wide Temperature Detecting Range   -40 to 85°C for sensor temperature   -40 to...

    Features:Wide Temperature Detecting Range   -40 to 85°C for sensor temperature   -40 to 115°C for object temperatureHigh accuracy of 1°C over wide temperatureMeasurement...

  • 30A Dual H-bridge Monster Moto Shield VNH2SP30 _A0890
    Out of stock
    30A Dual H-bridge Monster Moto Shield VNH2SP30 _A0890

    Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown  ... detail below

    Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A...

    Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum...

    ₨ 950
    Add to cart View
  • Text To Speech Module _A0888
    Available
    Text To Speech Module _A0888

    For Complete Artical how to use this module please visit http://www.toughdev.com/viewpost.php?id=2614473177299027939&t=0&s=1 Support the synthetic English letters  on-board embedded SYN6288 Chinese speech synthesis chip, SYN6288 is a cost-effective, high-end speech synthesis chips in a more natural effect, through...more detail given below

    For Complete Artical how to use this module please visit...

    For Complete Artical how to use this module please visit http://www.toughdev.com/viewpost.php?id=2614473177299027939&t=0&s=1 Support the synthetic English letters...

  • Ultimate 37 in 1 Sensor Modules Kit for Arduino & MCU _A0841
    Available
    Ultimate 37 in 1 Sensor Modules Kit for Arduino & MCU _A0841

    37 different modules for Arduino Compatible (list is given below) Best kit for learning Arduino Material: Circuit board Package Dimensions: 273*190*43mm Weight: 431g

    37 different modules for Arduino Compatible (list is given below) Best kit for learning...

    37 different modules for Arduino Compatible (list is given below) Best kit for learning Arduino Material: Circuit board Package Dimensions: 273*190*43mm Weight: 431g

  • Analog pH Sensor/ Meter Kit _A0815
    Out of stock
    Analog pH Sensor/ Meter Kit _A0815

    Need to measure water quality and other parameters but haven't got any low cost pH meter? Find it difficult to use with Arduino? Our analog pH meter, specially designed for Arduino controllers and has convenient and practical connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at ± 0.1pH (25 ℃)... more detail given below

    Need to measure water quality and other parameters but haven't got any low cost pH...

    Need to measure water quality and other parameters but haven't got any low cost pH meter? Find it difficult to use with Arduino? Our analog pH meter, specially designed for...

    ₨ 5,500
    Add to cart View
  • DS1077 Programmable Oscillator (16.2kHz to 133MHz) Breakout Board _A0797
    Available
    DS1077 Programmable Oscillator (16.2kHz to 133MHz) Breakout Board _A0797

    Description: This is a breakout board for the DS1077 is a dual-output, programmable, oscillator. Contains a filter capacitor and all 8 pins broken out to a 0.1" header. The DS1077 can be used as a processor-controlled frequency synthesizer or as a standalone oscillator. The two synchronous output operating frequencies are user-adjustable in submultiples of ...more detail given below

    Description: This is a breakout board for the DS1077 is a dual-output, programmable,...

    Description: This is a breakout board for the DS1077 is a dual-output, programmable, oscillator. Contains a filter capacitor and all 8 pins broken out to a 0.1" header. The...

  • 100Watt 850nm Super High Power IR infrared surveillance lights LED Lamp _A0771
    Out of stock
    100Watt 850nm Super Bright High Power IR infrared surveillance lights LED Lamp _A0771

    10000mWatt (100Watt) IR Lead Lamp  Power: 100W (there are 100 Mitsuhiro chip 1W)Wavelength: 850NMVoltage: 14-17VCurrent: 3500mARadiation power: 9000MWAngle: 120 degreesWorking temperature: -20 ° --- + 70 degrees Workers Storage Temperature: -20 ° --- + 80 degreesMain Application: suitable for CCTV camera (video capture) digital photography, surveillance,night vision etc

    10000mWatt (100Watt) IR Lead Lamp  Power: 100W (there are 100 Mitsuhiro chip...

    10000mWatt (100Watt) IR Lead Lamp  Power: 100W (there are 100 Mitsuhiro chip 1W)Wavelength: 850NMVoltage: 14-17VCurrent: 3500mARadiation power: 9000MWAngle: 120 degreesWorking...

    ₨ 16,500
    Add to cart View
  • USB to TTL  UART CP2102 Module with DTR pin _A0667
    Available
    USB to TTL UART CP2102 Module with DTR pin _A0667

    This is a redesigned CP2102 module, fully compatible with arduino pro mini, why? because all the pins are same as our FTDI basic board, and most important is the DTR pin enabled as FTDI, so you can directly upload sketch with this one. So what is the advantage? The price is almost only one third of the FTDI basic. Meanwhile, all the pins of CP2102 are brought...more detail given below

    This is a redesigned CP2102 module, fully compatible with arduino pro mini, why?...

    This is a redesigned CP2102 module, fully compatible with arduino pro mini, why? because all the pins are same as our FTDI basic board, and most important is the DTR pin enabled...

  • SparkFun I2C/SPI-to-UART Breakout - SC16IS750
    Available
    SparkFun I2C/SPI-to-UART Breakout - SC16IS750

    Description: This is a breakout board for the SC16IS750, a handy chip used to convert I2C or SPI serial signals to a single-channel, high-performance UART. As an application example: we use this chip on ourWiFly Shield to allow an Arduino to communicate with the WiFly RN-131G module - which is normally controlled via a UART - using an SPI interface. This allows....more detial given below

    Description: This is a breakout board for the SC16IS750, a handy chip used to convert...

    Description: This is a breakout board for the SC16IS750, a handy chip used to convert I2C or SPI serial signals to a single-channel, high-performance UART. As an application...

  • FLiR Dev Kit (FliR Thermal Imaging Camera )
    Available
    FLiR Dev Kit (FLiR Thermal Imaging Camera )

    Description: The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to be able to bring FLiR’s thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. All you need to do to get this kit set up, ... more detail given below

    Description: The FLiR Dev Kit includes a breakout as well as a Lepton® longwave...

    Description: The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to be able to bring FLiR’s thermal imaging...

    ₨ 67,000
    Add to cart View
  • Flexiforce Pressure Sensor - 100lbs.
    Available
    Flexiforce Pressure Sensor - 100lbs.

    Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end ...more detail given below

    Description: This is a piezoresistive force sensor from Tekscan. The harder you press,...

    Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to...

  • SparkFun Parallel DAC Breakout - AD5330 (8-Bit)
    Available
    SparkFun Parallel DAC Breakout - AD5330 (8-Bit)

    Description: This is a simple breakout board for Analog Device’s AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface, and can operate from a 2.5 to 5.5V supply consuming just 115uA (at 3V). The DB0-7 pins, the parallel data inputs, are used to configure the analog output voltage. CS selects the device, and data is loaded into...more detail given below

    Description: This is a simple breakout board for Analog Device’s AD5330 8-bit...

    Description: This is a simple breakout board for Analog Device’s AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface, and can operate from a 2.5...

  • SparkFun UV Sensor Breakout - ML8511
    Available
    SparkFun UV Sensor Breakout - ML8511

    Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of UV light that’s detected. This breakout can be very handy in creating devices that warn the user of sunburn or detect the UV index as it relates to weather conditions...more detail given below

    Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511...

    Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of...

  • SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2
    Available
    SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2

    Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it’s easy to interface with most controllers. Pressure output can ...more detail given below

    Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a...

    Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled)....

  • SparkFun Danger Shield
    Available
    SparkFun Danger Shield

    Description: The SparkFun Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs. The Danger Shield has so much potential; we can’t wait to see what you’re able to do with it! The shield’s features include...more detail given below

    Description: The SparkFun Danger Shield mounts on top of your Arduino or Arduino Pro...

    Description: The SparkFun Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs. The Danger Shield has so...

  • SparkFun 5-Way Tactile Switch Breakout
    Available
    SparkFun 5-Way Tactile Switch Breakout

    Description: Sometimes you need a very small directional input device (world’s smallest game controller, anyone?) This 5-way tactile switch (up, down, left, right, and center click) allows for joystick-like control in a very small package. This breadboard-friendly board breaks out all the switch signals, and includes pullup resistors configured so that the  ...more detail given below

    Description: Sometimes you need a very small directional input device (world’s smallest...

    Description: Sometimes you need a very small directional input device (world’s smallest game controller, anyone?) This 5-way tactile switch (up, down, left, right, and center...

  • Adjustable Step Up Boost Voltage Converter _A0630
    Available
    Adjustable Step Up Boost Voltage Converter _A0630

    Model:  XL6009 Input voltage: 3.5V ~ 32VOutput voltage: 5V ~ 35VOutput current: rated current is 2.5A, maximum 3A (Additional heatsink is required)Load regulation: ±0.5%Voltage regulation: ±0.5%Work Temperature: -40°C ~ +125°CMaximum power: 10WSize: 4.1 x 2.1 x 1.3cm

    Model:  XL6009 Input voltage: 3.5V ~ 32VOutput voltage: 5V ~ 35VOutput current: rated...

    Model:  XL6009 Input voltage: 3.5V ~ 32VOutput voltage: 5V ~ 35VOutput current: rated current is 2.5A, maximum 3A (Additional heatsink is required)Load regulation: ±0.5%Voltage...

  • On sale!
    MAX6675 K-type Thermocouple Temperature Sensor module _A0629
    Available
    MAX6675 K-type Thermocouple Temperature Sensor module _A0629

    Description: MAXIM IC MAX6675 Cold Junction Compensated K-Type Thermocouple to Digital Converter. This simple 8-pin SOIC IC attaches directly to any K-Type Thermocouple and interfaces via a SPI read-only interface. Works great with 8-pin SOIC to DIP adapters. 0.25C Resolution 0C to +1024C Minimal 2-wire digital interface  ...detail give below

    Description: MAXIM IC MAX6675 Cold Junction Compensated K-Type Thermocouple to Digital...

    Description: MAXIM IC MAX6675 Cold Junction Compensated K-Type Thermocouple to Digital Converter. This simple 8-pin SOIC IC attaches directly to any K-Type Thermocouple and...

    Reduced price! ₨ 750
    Add to cart View
  • 50A Dual Channel Motor Drive Module _A0627
    Out of stock
    50A Dual Channel Motor Drive Module _A0627

    This motor driver works with single channel max 50A load capacity. This module performs far better than MC33886 or L298 motor driver, especially in terms of motor speed control and power efficiency....more detail given below

    This motor driver works with single channel max 50A load capacity. This module performs...

    This motor driver works with single channel max 50A load capacity. This module performs far better than MC33886 or L298 motor driver, especially in terms of motor speed control...

    ₨ 4,950
    Add to cart View
  • Flex Sensor 2.2"
    Out of stock
    Flex Sensor 2.2"

    The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the ...more detail  given below

    The resistance of the flex sensor changes when the metal pads are on the outside of the...

    The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). A simple flex sensor 2.2" in length. As the sensor is...

    ₨ 1,100
    Add to cart View
  • Text-to-Speech Module - Emic 2
    Available
    Text-to-Speech Module - Emic 2

    Description: Ever wish your project could just speak up and tell you what’s going on? Why not give it a voice? The Emic-2 Text-to-Speech module makes it really easy to give voice to your embedded projects. The Emic-2 was designed by Parallax in conjunction with Grand Idea Studio to make voice synthesis a total no-brainer. Simply connect the Emic-2 to a 5VDC power....more detail given below

    Description: Ever wish your project could just speak up and tell you what’s going on?...

    Description: Ever wish your project could just speak up and tell you what’s going on? Why not give it a voice? The Emic-2 Text-to-Speech module makes it really easy to give...

    Reduced price! ₨ 10,200
    Add to cart View
  • Pressure sensor MD-PS002 (700KPa) pressure / tire pressure sensors  _A0562
    Available
    Pressure sensor MD-PS002 (700KPa) pressure / tire pressure sensors _A0562

    datasheet: http://www.shmind.com/upload/201202/201202101011084076.pdf detail given below

    datasheet: http://www.shmind.com/upload/201202/201202101011084076.pdf detail given below

    datasheet: http://www.shmind.com/upload/201202/201202101011084076.pdf detail given below

  • AD9833 DDS Signal Generator Module _A0561
    Available
    AD9833 DDS Signal Generator Module _A0561

    1.high quality. 2.The AD9833 is a low power programmable waveform generator capable of producing sine, triangular, and square wave outputs. 3.Waveform generation is required in various types of sensing, actuation, and time domain reflectometry applications....more detail given below Arduino Code Given Below

    1.high quality. 2.The AD9833 is a low power programmable waveform generator capable of...

    1.high quality. 2.The AD9833 is a low power programmable waveform generator capable of producing sine, triangular, and square wave outputs. 3.Waveform generation is required in...

  • Available
    Dual Speed Encoder Module for speed detection _A0557

    Widely used in motor speed detection, pulse-counting, any position, possesses 2 road testing. Module unique : Trough-like optocoupler use sensor tank width 5mm . Comparator output , signal clean , waveform good , riving capacity strong , more than 15ma. Working voltage 3.3v-5v..... more detail given below  

    Widely used in motor speed detection, pulse-counting, any position, possesses 2 road...

    Widely used in motor speed detection, pulse-counting, any position, possesses 2 road testing. Module unique : Trough-like optocoupler use sensor tank width 5mm . Comparator...

  • Smoke Sensor Module With Relay Output _A0553
    Available
    Smoke Sensor Module With Relay Output _A0553

    Voltage: DC 9VStandby Current: 10μAInduced Current: <30mARelay Output: Normally open / closed; high / low level outputSensitivity: AdjustableWorking Temperature: -5 deg C - +50 deg CModel: DYP-ME0010Size (L x W x H): Approx. 2.7 x 2 x 0.7 inch / 7 x 5 x 1.8 cm

    Voltage: DC 9VStandby Current: 10μAInduced Current: <30mARelay Output: Normally open...

    Voltage: DC 9VStandby Current: 10μAInduced Current: <30mARelay Output: Normally open / closed; high / low level outputSensitivity: AdjustableWorking Temperature: -5 deg C -...

  • 1-Channel Solid State Relay Module _A0544
    Available
    1-Channel Solid State Relay Module _A0544

    Compares with the traditional mechanical relay, the Solid State Relay (SSR) has many advantages: it has a longer life, with a much higher turn on/off speed and no noise. Besides, it also has better resistance to vibration and mechanical shock, and better moisture proof performance. .... more detail given below

    Compares with the traditional mechanical relay, the Solid State Relay (SSR) has many...

    Compares with the traditional mechanical relay, the Solid State Relay (SSR) has many advantages: it has a longer life, with a much higher turn on/off speed and no noise....

  • Available
    DSM501A DUST SENSOR _A0543

    Overview The dust sensor module DSM501A is low cost,compact size for a particle density sensor.  Quantitative particle measurement with the principle of particle counter. FIne particle of which diameters are bigger than one micron could be detected with high sensitivity. Inside heater realizes the self-air taking. One control contact and two output contacts... more detail given below

    Overview The dust sensor module DSM501A is low cost,compact size for a particle density...

    Overview The dust sensor module DSM501A is low cost,compact size for a particle density sensor.  Quantitative particle measurement with the principle of particle counter. FIne...

  • IIC I2C Serial Interface Module for 16x2/20x4 LCD _A0541
    Available
    IIC I2C Serial Interface Module for 16x2/20x4 LCD _A0541

    If you have a problem with the wiring, multi-line LCD display makes confusing or inadequate leg Arduino I2C LCD module, this is the recommended option. It can be connected to the LCD monitor 16x2 or 20x4 using wires only two lines to help ease leg rest Arduino to use the E key, easy to use with standard library available.

    If you have a problem with the wiring, multi-line LCD display makes confusing or...

    If you have a problem with the wiring, multi-line LCD display makes confusing or inadequate leg Arduino I2C LCD module, this is the recommended option. It can be connected to...

  • Infrared Thermometer (IR) module MLX90614 family (Arduino compatible) _ A0530
    Out of stock
    Infrared Thermometer (IR) module MLX90614 family (Arduino compatible) _ A0530

    It is infrared thermometer with an I2C interface. Uses the MELEXIS MLX90614ESF-BAA-000-TU-ND chip which works as a contactless temperature measurement sensor. It is Easy to use with an Arduino or other microcontroller. Infrared thermometer MLX90614 specifications:- Measuring temperature range: -40 - + 125 ° C - Operating temperature range: -70 - + 380 ° C, ...detail below

    It is infrared thermometer with an I2C interface. Uses the MELEXIS...

    It is infrared thermometer with an I2C interface. Uses the MELEXIS MLX90614ESF-BAA-000-TU-ND chip which works as a contactless temperature measurement sensor. It is Easy to use...

    ₨ 1,500
    Add to cart View
  • Digital Tachometer (Speed detection) Module _A0529
    Available
    Digital Tachometer (Speed detection) Module _A0529

    The Puzzle - Tachometer is a simple module that allow you to test the speed of the motor.Widely used for motor speed detection, Pulse count, position limit, and so on...more detail given below

    The Puzzle - Tachometer is a simple module that allow you to test the speed of the...

    The Puzzle - Tachometer is a simple module that allow you to test the speed of the motor.Widely used for motor speed detection, Pulse count, position limit, and so on...more...

  • Ardumoto - Motor Driver Shield _A0522
    Available
    Ardumoto - Motor Driver Shield _A0522

    Description: This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the SparkFun Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF...more detail given below

    Description: This is a motor shield for Arduino that will control two DC motors. Based...

    Description: This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the SparkFun Ardumoto can drive up to 2 amps per channel. The board...

  • Micro CMOS Camera 600TVL 728×488 _A0515
    Available
    Micro Serial CMOS Camera 600TVL 728×488 _A0515

    light-sensitive chip: 1/3 inch  HD Color CMOS Depending on the frequency standard: NTSC / PAL Effective pixels: 728 (H) × 488 (V)photosensitive area: 4622μ m × 3611μmDefinition: 600 TVLMinimum illumination 0.1 LuxVideo Output: 1.0Vp-p 75Ω  

    light-sensitive chip: 1/3 inch  HD Color CMOS Depending on the frequency standard: NTSC...

    light-sensitive chip: 1/3 inch  HD Color CMOS Depending on the frequency standard: NTSC / PAL Effective pixels: 728 (H) × 488 (V)photosensitive area: 4622μ m × 3611μmDefinition:...

  • Xbee Breakout Board Module (Expansion/Adapter board) _ A0501
    Out of stock
    Xbee Breakout Board Module (Expansion/Adapter board) _ A0501

    Description:  This is a Simple Breakout board for the Popular Product from Digi XBee This board Breaks out All 20 pins of the XBee to a 0.1 "standard spacing header The Dual row spacing BETWEEN 0.1." headers is 0.5 "making it Breadboard DIP Friendly. . We highly recommend using the female sockets to avoid having to ....detail given below

    Description:  This is a Simple Breakout board for the Popular Product from Digi XBee...

    Description:  This is a Simple Breakout board for the Popular Product from Digi XBee This board Breaks out All 20 pins of the XBee to a 0.1 "standard spacing header The Dual row...

    ₨ 400
    Add to cart View
  • Double-Sided Protoboard 5cm x 7cm _A0471
    Available
    Double-Sided Protoboard 5cm x 7cm _A0471

    Specification Base Material : FR - 4 Protoboard Type : Double Side Board Size : 5 x 7cm Board Thickness : 1.6mm Hole Pitch : 2.54mm Hole Quantity : 18 x 24

    Specification Base Material : FR - 4 Protoboard Type : Double Side Board Size : 5 x...

    Specification Base Material : FR - 4 Protoboard Type : Double Side Board Size : 5 x 7cm Board Thickness : 1.6mm Hole Pitch : 2.54mm Hole Quantity : 18 x 24

  • 0-5Kg Weight Load Cell Sensor for Electronic Balance_A0470
    Out of stock
    0-5Kg Weight Load Cell (strain gauge pressure) Sensor for Electronic Balance_A0470

    This weight sensor load cell is widely used in electronic counting scales,platform scales etc. Its range is 0-5Kg...more detail given below

    This weight sensor load cell is widely used in electronic counting scales,platform...

    This weight sensor load cell is widely used in electronic counting scales,platform scales etc. Its range is 0-5Kg...more detail given below

    ₨ 730
    Add to cart View
  • 8x8  RGB LED Dot Matrix module _A0469
    Available
    8x8 RGB LED Dot Matrix module _A0469

    Do you know how is the cool advertising display made? It is exactly composed of these small RGB LED matrix. If you want to make a similar display, this RGB LED matrix will meet you need. The 8x8 LED matrix has 32 of pins, you may need a driver to control it....more detail given below

    Do you know how is the cool advertising display made? It is exactly composed of these...

    Do you know how is the cool advertising display made? It is exactly composed of these small RGB LED matrix. If you want to make a similar display, this RGB LED matrix will meet...

  • Wrobot Full Color RGB LED Module_A0480
    Available
    Wrobot Full Color RGB LED Module_A0480

    Detail given below

    Detail given below

    Detail given below

  • C8051F020 C8051F development board EX-F02x-Q100 _A0453
    Available
    C8051F020 C8051F development board EX-F02x-Q100 _A0453

    A development board for the C8051F02x series microcontrollers, such as C8051F020, C8051F022. It is designed to give designers a quick start to develop code on these devices.  This development board comes with the C8051F020 chip in TQFP100 package.. more detail given below

    A development board for the C8051F02x series microcontrollers, such as C8051F020,...

    A development board for the C8051F02x series microcontrollers, such as C8051F020, C8051F022. It is designed to give designers a quick start to develop code on these devices....

  • STM32F407ZET6 ARM STM32 Dev-Board Port-407Z _A0451
    Available
    STM32F407ZET6 ARM STM32 Dev-Board Port-407Z _A0451

    Port407Z is an STM32 development board that features an STM32F407ZET6 device as the microcontroller, supports further expansion with various optional accessory boards for your specific application. It is ideal for starting application development with STM32F family...more detail given below

    Port407Z is an STM32 development board that features an STM32F407ZET6 device as the...

    Port407Z is an STM32 development board that features an STM32F407ZET6 device as the microcontroller, supports further expansion with various optional accessory boards for your...

  • 5A Integrated 3Axis CNC TB6600 +Intelligent Handle Keyboard+ LCD Digital Display with controller _A0450
    Available
    5A Integrated 3Axis CNC TB6600 +Intelligent Handle Keyboard+ LCD Digital Display with controller _A0450

    Detail given below....

    Detail given below....

    Detail given below....

    ₨ 19,500
    Add to cart View
  • 5A Integrated 3Axis CNC TB6600 Stepping Driver Box Set,_A0449
    Available
    5A Integrated 3 Axis CNC TB6600 Stepper Driver w/ Controller, LCD and Keypad Box Set,_A0449

    Comparing with the previous 3rd generation TB6560AHQ Stepper Driver, besides including all the functions that the 3rd generation TB6560AHQ Stepper Driver has, this newly released 3rd generation TB6600HG Stepper Driver was specially developed for bigger stepper motors which have higher current. As long as the current range of the stepper motors is within 0.2-5.0 amps.more detail given below

    Comparing with the previous 3rd generation TB6560AHQ Stepper Driver, besides including...

    Comparing with the previous 3rd generation TB6560AHQ Stepper Driver, besides including all the functions that the 3rd generation TB6560AHQ Stepper Driver has, this newly...

    ₨ 19,500
    Add to cart View
  • Micro TF SD Card Module_A0477
    Available
    Micro TF SD Card Module_A0477

    Control Interface:A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin3.3V regulator circuit:LDO regulator output 3.3V as level converter chip, Micro SD card supply.. more detail given below.

    Control Interface:A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,...

    Control Interface:A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal...

  • On sale!
    IR Control Relay Module 5V _EW0476
    Available
    IR Control Relay Module 5V _A0476

    IR Remote controle relay module is use with IR remote through withich you can control any appliances/circuit from for a distance in IR range. detail given bellow.

    IR Remote controle relay module is use with IR remote through withich you can control...

    IR Remote controle relay module is use with IR remote through withich you can control any appliances/circuit from for a distance in IR range. detail given bellow.

    Reduced price! ₨ 700
    Add to cart View
  • A4988 StepStick Stepper Motor Driver Module (35V, 2A) with heat-sink _A0438
    Available
    A4988 StepStick Stepper Motor Driver Module (35V, 2A) with heat-sink _A0438

    A4988 is a complete microstepping motor driver with built-in translator for easy operation. The product can be full, half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper motor output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can slow or mixed decay mode...More detail given below.

    A4988 is a complete microstepping motor driver with built-in translator for easy...

    A4988 is a complete microstepping motor driver with built-in translator for easy operation. The product can be full, half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper...

  • Smart Home Development Kit for Android apps _A0418
    Available
    Smart Home Development Kit for Android apps _A0418

    Description:External power supply voltage: 7 ~ 12V (> 500mA)Relay Max Switching Voltage: 240VAC/60VDCRelay Max Switching Current: 5AContact load capacity: 1A 250VAC, 3A 120VA / 24VDCNumber of relays: 4Wireless output interface: (serial) xBee / Bluetooth Bee / RFBee occupied ports: (relay) Digital mouth 2,3,4,5, (wireless module) Digital mouth 0,1

    Description:External power supply voltage: 7 ~ 12V (> 500mA)Relay Max Switching...

    Description:External power supply voltage: 7 ~ 12V (> 500mA)Relay Max Switching Voltage: 240VAC/60VDCRelay Max Switching Current: 5AContact load capacity: 1A 250VAC, 3A 120VA...

  • 8 Channel 5V Relay Module (Arduino Compatible) _A0415
    Available
    8 Channel 5V Relay Module (Arduino Compatible) _A0415

    This board provides 8 optically isolated inputs that accept a wide range of voltage, including the 3VDC and 5VDC signals available on the Arduino. This is a great way to switch on or off AC or DC loads using your Arduino!The relays are single-pole double-throw (SPDT) and are rated for 10A @ 250VAC. The ground for the relay coils is separate from the ground for the input signals.

    This board provides 8 optically isolated inputs that accept a wide range of voltage,...

    This board provides 8 optically isolated inputs that accept a wide range of voltage, including the 3VDC and 5VDC signals available on the Arduino. This is a great way to switch...

  • Breadboard Power Module 5V-3.3V_ A0407
    Available
    Breadboard Power Module 5V-3.3V_ A0407

    Breadboard power supply module, compatible with 5 V, 3.3 VApply to MB102 breadboardInput voltage: 6.5-12 V (DC) or USB power supplyOutput voltage: 3.3V/5V can switch overMaximum output current: <700 maFluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 VOn-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.

    Breadboard power supply module, compatible with 5 V, 3.3 VApply to MB102...

    Breadboard power supply module, compatible with 5 V, 3.3 VApply to MB102 breadboardInput voltage: 6.5-12 V (DC) or USB power supplyOutput voltage: 3.3V/5V can switch overMaximum...

  • TCS3200 Color Sensor Module _A0401
    Available
    TCS3200 Color Sensor Module _A0401

    TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few.... more detail given detail

    TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor...

    TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 can detect and measure a nearly limitless range of...

  • MQ-3 Alcohol Ethanol Sensor Module _A0400
    Available
    MQ-3 Alcohol Ethanol Sensor Module _A0400

    The latest MQ - X series gas sensor is designed to meet the demand of enviromental protection, it   MQ - 3 gas sensor,with high sensitivity to ethanol, can resist the interference of gasoline, smog, vapor, detect ethanol in the air sensitively. The material of MQ - 3 gas sensor is SnO2 ,which has low conductivity in clean air..... more detail given below.

    The latest MQ - X series gas sensor is designed to meet the demand of enviromental...

    The latest MQ - X series gas sensor is designed to meet the demand of enviromental protection, it   MQ - 3 gas sensor,with high sensitivity to ethanol, can resist the...

  • ULN2003 Driver Board_A0398
    Available
    ULN2003 Driver Board_A0398

    A, B, C, D four-phase LED indicates the status of the stepper motor work.Stepper motor with a standard interface, when used directly pluggable.Drive Module Board Size:2.8cm x 2.8cm x 2cm - 1.1inch x 1.1inch x 0.79inch. 

    A, B, C, D four-phase LED indicates the status of the stepper motor work.Stepper motor...

    A, B, C, D four-phase LED indicates the status of the stepper motor work.Stepper motor with a standard interface, when used directly pluggable.Drive Module Board Size:2.8cm x...

  • 1-8S Lipo/Li-ion/Fe Battery Voltage Tester and Low Voltage Buzzer Alarm _A0385
    Available
    1-8S Lipo/Li-ion/Fe Battery Voltage Tester and Low Voltage Buzzer Alarm _A0385

    Features: Use for 1-8S Lipo/Li-ion/LiMn/Li-Fe Voltage detection precision: +_0.01V. Unit voltage display range: 0.5~4.5V Total voltage display range: 0.5~36V 1S test mode voltage range: 4-15V Low voltage alarm mode for 2-8S Alarm set value range:OFF~2.7~3.8V Specification: Size: 40mm x 25mm x 11mm Original box: NO Net weight: 9g Package weight: 15g Color: Red

    Features: Use for 1-8S Lipo/Li-ion/LiMn/Li-Fe Voltage detection precision: +_0.01V....

    Features: Use for 1-8S Lipo/Li-ion/LiMn/Li-Fe Voltage detection precision: +_0.01V. Unit voltage display range: 0.5~4.5V Total voltage display range: 0.5~36V 1S test mode...

  • Optical Fingerprint Sensor Module (Arduino Compatible)
    Out of stock
    Optical Fingerprint Sensor Module (Arduino Compatible)_A0358

    Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. These modules are typically used in safes - there's a high powered DSP chip that does the image rendering, calculation, feature-finding and searching. Connect to any microcontroller or system with TTL serial,..more detail given below

    Secure your project with biometrics - this all-in-one optical fingerprint sensor will...

    Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. These modules are...

    ₨ 4,200
    Add to cart View
  • On sale!
    Speech/Voice Recognition Module V3 (latest version)
    Available
    Speech/Voice Recognition Module V3 (latest version) _ A0343

    Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking) Maximum 7 voice commands effective at same time Arduino library is supplied Easy Control: UART/GPIO User-control General Pin Output  ... more detail given below

    Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking)...

    Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking) Maximum 7 voice commands effective at same time Arduino library is supplied Easy Control:...

    Reduced price! ₨ 2,950
    Add to cart View
  • 4 Axis CNC Controller TA8435H Stepper Motor Driver Board Mach 2 3 For CNC Machine
    Available
    4 Axis CNC Controller TA8435H Stepper Motor Driver Board Mach 2 3 For CNC Machine _A0445

    Toshiba TA8435H chip - maximum 2.5A drive current ! 1 - 1/8 microstep setting Chip 555 adapts the SOP( SURFACE MOUNT) In application of the SMT solder-reflow technic. Add the 24V and 5V indication LED light Use the DCDC as the isolation of the front and the en Document Download: https://drive.google.com/drive/folders/0B4FTB8_CQRXMaDQtTXItdE9MdVk?usp=sharing

    Toshiba TA8435H chip - maximum 2.5A drive current ! 1 - 1/8 microstep setting Chip 555...

    Toshiba TA8435H chip - maximum 2.5A drive current ! 1 - 1/8 microstep setting Chip 555 adapts the SOP( SURFACE MOUNT) In application of the SMT solder-reflow technic. Add the...

  • KQ-130F Power line carrier module (Communication over Power Line)
    Available
    KQ-130F Power line carrier module (Communication over Power Line)_A0333

    Communication over Power Line. This module is designe to communicate between two device through Power line(e.g 220V power line) without any extra components. Working rate:120~135KHZInterface baud rate:9600bps, the true baud rate is 100bps,250-byte bufferTemperature:-25 degree~+70 degreeHumidity: 90%Power:DC +5V  Receiver:11mA  Transmitter:300mA 

    Communication over Power Line. This module is designe to communicate between two device...

    Communication over Power Line. This module is designe to communicate between two device through Power line(e.g 220V power line) without any extra components. Working...

  • 5A Current Sensor module ACS712-5A
    Available
    5A Current Sensor module ACS712-5A_A0330

    Color: BlueMaterial: PCB + metalACS712ELC-05B sensor chipsetPowered by 5V power supplyOn-board power indicatorMeasures -5~+5A current, corresponding simulation output 185mV/AOutput voltage is VCC/2 when on current was measuredACS712 is based on the principle of Hall detection, please avoid the magnetic field affect when using it

    Color: BlueMaterial: PCB + metalACS712ELC-05B sensor chipsetPowered by 5V power...

    Color: BlueMaterial: PCB + metalACS712ELC-05B sensor chipsetPowered by 5V power supplyOn-board power indicatorMeasures -5~+5A current, corresponding simulation output...

  • Single-axis Analog Gyroscope Module ENC-03RC
    Available
    Single-axis Analog Gyroscope Module ENC-03RC _A0328

    Chip: ENC-03RC Op amp: The ENC-03RC (SOT23-5 package, excellent performance) Power supply :3-5v Output mode: analog output Ultra-small size: 10mm * 17.5mm

    Chip: ENC-03RC Op amp: The ENC-03RC (SOT23-5 package, excellent performance) Power...

    Chip: ENC-03RC Op amp: The ENC-03RC (SOT23-5 package, excellent performance) Power supply :3-5v Output mode: analog output Ultra-small size: 10mm * 17.5mm

  • Voltage Sensor  (0-25V)
    Available
    Voltage Sensor (0-25V)_A0326

    Voltage input range: DC0-25VVoltage detection range: DC0.02445V-25VVoltage Analog Resolution: 0.00489VDC input connector: Terminal cathode connected to VCC, GND negative poleOutput interface: "+" then 5/3.3V, "-" then GND, "s" then the Arduino AD pins 

    Voltage input range: DC0-25VVoltage detection range: DC0.02445V-25VVoltage Analog...

    Voltage input range: DC0-25VVoltage detection range: DC0.02445V-25VVoltage Analog Resolution: 0.00489VDC input connector: Terminal cathode connected to VCC, GND negative...

  • 0.9v-5v Boost Step-up Power Supply Module(USB Connector)
    Available
    0.9v-5v Boost Step-up Power Supply Module(USB Connector)_A0320

    Out current upto 600mAhEnter any DC voltage of 0.9V~5V and will output stable 5V DC with output current of 500~600MA. For example, the device could be powered by a single AA battery (current limitation would be from the battery)An example; connect 2x AA batteries in series to the appropriate +/- connectors and use a USB cable to power the target 5V device      

    Out current upto 600mAhEnter any DC voltage of 0.9V~5V and will output stable 5V DC...

    Out current upto 600mAhEnter any DC voltage of 0.9V~5V and will output stable 5V DC with output current of 500~600MA. For example, the device could be powered by a single AA...

  • 5V 100mA Polycrystalline PET Solar Cell _ A0309
    Out of stock
    5V 100mA Polycrystalline PET Solar Cell _ A0309

    Rated Power: 0.5WOperating Voltage:5VOperating Current:100mAOpen Circuit Voltage:6VShort Circuit Current:106mADimension:50*100*3mmOperating Temperature:-20℃±85℃Light Intensity:1000W/M2,25℃,AM1.5Package Material:Anti-UV,resistance to yellowing,high transparent EVA epoxy resin adhesiveBase Material:Resistance to deformation, high strength PCB board

    Rated Power: 0.5WOperating Voltage:5VOperating Current:100mAOpen Circuit...

    Rated Power: 0.5WOperating Voltage:5VOperating Current:100mAOpen Circuit Voltage:6VShort Circuit Current:106mADimension:50*100*3mmOperating Temperature:-20℃±85℃Light...

    ₨ 600
    Add to cart View
  • Thermocouple Amplifier MAX6675 with K-type Thermocouple Temperature Sensor _ A0305
    Available
    Thermocouple Amplifier MAX6675 with K-type Thermocouple Temperature Sensor _ A0305

    Simple SPI serial port temperature value output. The temperature range is 0℃ ~ 1024℃, and the converter temperature resolution is 0.25 °C. On-chip cold junction compensation. High-impedance differential inputs. Thermocouple break detection.  

    Simple SPI serial port temperature value output. The temperature range is 0℃ ~ 1024℃,...

    Simple SPI serial port temperature value output. The temperature range is 0℃ ~ 1024℃, and the converter temperature resolution is 0.25 °C. On-chip cold junction compensation....

  • Dual H-Bridge Motor Driver Module (L298)
    Available
    Dual H-Bridge Motor Driver Module (L298)_A0023

    This dual bidirectional motor driver is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently control two motors of up to 2A each in both directions. It is ideal for robotic applications and well suited for connection to a microcontroller requiring just a couple of control lines per motor.

    This dual bidirectional motor driver is based on the very popular L298 Dual H-Bridge...

    This dual bidirectional motor driver is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently...

  • Sharp GP2Y0A41SK0F 4-30cm Distance Sensor (Short Range) _A0277
    Available
    Sharp GP2Y0A41SK0F 4-30cm Distance Sensor (Short Range) _A0277

    it is a distance measuring sensor, composed of an integrated combination of PSD , IR-LED and signal processing circuit.  The variety of the reflectivity of the object, the  environmental temperature and the operating duration are not influenced easily. This device outputs the voltage corresponding to the detection distance. So this sensor can also be used as a proximity sensor.

    it is a distance measuring sensor, composed of an integrated combination of PSD ,...

    it is a distance measuring sensor, composed of an integrated combination of PSD , IR-LED and signal processing circuit.  The variety of the reflectivity of the object, the...

  • AC CURRENT TRANSFORMER (CURRENT SENSOR) MODULE 0-5A 3P/4P INTERFACE FOR ARDUINO
    Available
    5A AC CURRENT SENSOR MODULE 0-5A 3P/4P INTERFACE FOR ARDUINO_A0265

    Item Specifications: is_customized: YesPower: Medium PowerUsage: Limiter DiodeStructure: PNPSpecial Function: High Reverse Voltage Point Contact DiodeFrequency: High FrequencyType: Amplifier  

    Item Specifications: is_customized: YesPower: Medium PowerUsage: Limiter...

    Item Specifications: is_customized: YesPower: Medium PowerUsage: Limiter DiodeStructure: PNPSpecial Function: High Reverse Voltage Point Contact DiodeFrequency: High...

  • 3A MINI DC-DC STEP-DOWN POWER MODULE (0.8V-20V)
    Out of stock
    3A MINI DC-DC STEP-DOWN POWER MODULE (0.8V-20V)_A0246

    This is a mini DC-DC buck converter step-down power modulewith size of 22x17x4mm,capable of driving a load up to 3A with high efficiency, which can work with Iteaduino UNO, other mainboards and basic modules. It can also be used in DIY portable power, monitor power supply, buggy power, camera power supply etc.

    This is a mini DC-DC buck converter step-down power modulewith size of...

    This is a mini DC-DC buck converter step-down power modulewith size of 22x17x4mm,capable of driving a load up to 3A with high efficiency, which can work with Iteaduino UNO,...

    ₨ 100
    Add to cart View
  • 20A CURRENT SENSOR MODULE ACS712ELCTR-20A (+/- 20 AMP)
    Available
    20A CURRENT SENSOR MODULE ACS712ELCTR-20A (+/- 20 AMP)_A0180

    This current sensor gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems.

    This current sensor gives precise current measurement for both AC and DC signals. These...

    This current sensor gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems.

  • LM2596 VARIABLE VOLTAGE REGULATOR WITH BUILT IN VOLTMETER 4-40V TO 1.3-37V, 2A MAX (GREEN)
    Available
    LM2596 VARIABLE VOLTAGE REGULATOR WITH BUILT IN VOLTMETER 4-40V TO 1.3-37V, 2A MAX (GREEN)_A0110

    Feature: With voltage display function.  Button to switch measurement of the input or output voltage,and LED indicates  the current measurement of the input or output voltage. High efficiency,150 kHz fixed frequency internal oscillator. Thermal shutdown and current limit protection Continuously adjustable output voltage range of 1.25V -37V, 4-40V input voltage  range.

    Feature: With voltage display function.  Button to switch measurement of the input or...

    Feature: With voltage display function.  Button to switch measurement of the input or output voltage,and LED indicates  the current measurement of the input or output voltage....

  • 30A CURRENT SENSOR MODULEACS712ELCTR-30A
    Available
    30A CURRENT SENSOR MODULE ACS712ELCTR-30A_A0096

    Specifications: 1. Current sensor chip: ACS712ELC-30A;2. Pin 5V power supply, on-board power indicator;3. The module can be measured plus or minus 30 amps, corresponding to the analog output 66mV / A;4. There is no detection current through, the output voltage is VCC / 2;5. PCB board size: 31 (mm) x13 (mm);Note: ACS712 Hall detection principle, when you use to avoid magnetic field impact this!

    Specifications: 1. Current sensor chip: ACS712ELC-30A;2. Pin 5V power supply, on-board...

    Specifications: 1. Current sensor chip: ACS712ELC-30A;2. Pin 5V power supply, on-board power indicator;3. The module can be measured plus or minus 30 amps, corresponding to the...

  • LM2596 DC-DC 4.5-40V ADJUSTABLE STEP-DOWN POWER SUPPLY MODULE
    Out of stock
    LM2596 DC-DC 4.5-40V ADJUSTABLE STEP-DOWN POWER SUPPLY MODULE_A0062

    This is high performance DC to DC Step Down Adjustable Power Supply Module. Based on LM2596 Switching Regulator Specification:Input voltage: 3.2-40V (Input voltage must be higher than output voltage 1.5V above) Output voltage: 1.5-35V (Adjustable) Output current:Rated current is 2A,maximum 3A(Additional heatsink is required) If the output power greater than 15W, the proposed combined heat sink

    This is high performance DC to DC Step Down Adjustable Power Supply Module. Based on...

    This is high performance DC to DC Step Down Adjustable Power Supply Module. Based on LM2596 Switching Regulator Specification:Input voltage: 3.2-40V (Input voltage must be...

    ₨ 100
    Add to cart View
  • DIGITAL VOLTMETER HEAD (GREEN COLOR)_A0054
    Available
    Digital Voltmeter Module _A0054

    Working voltage : 3.3 ~ 30V ( with reverse polarity protection )Test voltage : 0 ~ 99.9VOperating Current : <20mADisplay : 0.36 "LED, red  Dimensions: Length Width 23x 15x 10mm thickHole size : 24x15mmHole screw hole size : 2mmMeasurement rate :  ≥500mS / timesAccuracy : 1% (1 word )Extreme working conditions :Minimum operating voltage : +3.3 VMaximum working voltage : +30 V

    Working voltage : 3.3 ~ 30V ( with reverse polarity protection )Test voltage : 0 ~...

    Working voltage : 3.3 ~ 30V ( with reverse polarity protection )Test voltage : 0 ~ 99.9VOperating Current : <20mADisplay : 0.36 "LED, red  Dimensions: Length Width 23x 15x...

  • PHOTOSENSITIVE LIGHT SENSOR MODULE
    Available
    PHOTOSENSITIVE LIGHT SENSOR MODULE_A0251

    Photosensitive diode module is the most sensitive for environmental light intensity, generally used for detecting the ambient brightness and intensity, in most of the cases with photosensitive resistance sensor module universal, it is difference that is the photosensitive diode module directional well and can sense the fixed direction of light source

    Photosensitive diode module is the most sensitive for environmental light intensity,...

    Photosensitive diode module is the most sensitive for environmental light intensity, generally used for detecting the ambient brightness and intensity, in most of the cases with...

  • INFRARED LIGHT BEAM PHOTOELECTRIC SENSOR MODULE WITH LM393 IC
    Available
    IR Photoelectric Encoder Sensor Module With Amplifier_A0151

    Module Features:1, the use of imported groove coupler sensor2, the groove width of 10mm.3, the output state indicator lamp output high, output low lights.4, block, output high; unobstructed, output low.5, the comparator output signal clean, good waveform, driving ability, more than 15mA.

    Module Features:1, the use of imported groove coupler sensor2, the groove width of...

    Module Features:1, the use of imported groove coupler sensor2, the groove width of 10mm.3, the output state indicator lamp output high, output low lights.4, block, output high;...

  • LIGHT INTENSITY BH1750FVI ILLUMINATION MODULE
    Out of stock
    LIGHT INTENSITY BH1750FVI ILLUMINATION MODULE_A0138

    Key Features: Original BH1750FVI chip using ROHMPower supply :3-5vIllumination range :0-65535 lx1 Sensors built 16bitAD converter2 Direct digital output, omitting complex calculations, calibration is omitted3 Does not distinguish between ambient light

    Key Features: Original BH1750FVI chip using ROHMPower supply :3-5vIllumination range...

    Key Features: Original BH1750FVI chip using ROHMPower supply :3-5vIllumination range :0-65535 lx1 Sensors built 16bitAD converter2 Direct digital output, omitting complex...

    ₨ 500
    Add to cart View
  • DIY ARDUINO COMPATIBLE INFRARED (IR) SENSOR RECEIVER MODULE
    Available
    DIY ARDUINO COMPATIBLE INFRARED (IR) SENSOR RECEIVER MODULE_A0137

    DescriptionIR Receiver Module is a 38KHz infrared receiver module which is Arduino compatible. It can receive the standard 38KHz modulated remote controller signal. Through programing the Arduino, you can realize decoding of the remote controller signal. Using this item, you can make a universal remote controller with learning function.

    DescriptionIR Receiver Module is a 38KHz infrared receiver module which is Arduino...

    DescriptionIR Receiver Module is a 38KHz infrared receiver module which is Arduino compatible. It can receive the standard 38KHz modulated remote controller signal. Through...

  • TCS230 COLOR RECOGNITION SENSOR MODULE
    Available
    TCS230 COLOR RECOGNITION SENSOR MODULE_A0017

    Features:    Chip: TCS230    Input voltage: DC 3V-5V    Output frequency voltage: 0 ~ 5V    Use bright white LED lights    can be connected directly with Microcontroller    Static detection of the measured object color    Best detection distance: 10mm

    Features:    Chip: TCS230    Input voltage: DC 3V-5V    Output frequency voltage: 0 ~...

    Features:    Chip: TCS230    Input voltage: DC 3V-5V    Output frequency voltage: 0 ~ 5V    Use bright white LED lights    can be connected directly with Microcontroller...

  • RASPBERRY PI CAMERA MODULE (CLONE)
    Out of stock
    RASPBERRY PI CAMERA MODULE (CLONE)_A0174

    This 5mp camera module is capable of 1080p video and still images and connects directly to your raspberry pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go!

    This 5mp camera module is capable of 1080p video and still images and connects directly...

    This 5mp camera module is capable of 1080p video and still images and connects directly to your raspberry pi. Connect the included ribbon cable to the CSI (Camera Serial...

    ₨ 2,300
    Add to cart View
  • RASPBERRY PI CAMERA MODULE (ORIGINAL)
    Available
    RASPBERRY PI CAMERA MODULE (ORIGINAL)_A0165

    This 5mp camera module is capable of 1080p video and still images and connects directly to your raspberry pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go!

    This 5mp camera module is capable of 1080p video and still images and connects directly...

    This 5mp camera module is capable of 1080p video and still images and connects directly to your raspberry pi. Connect the included ribbon cable to the CSI (Camera Serial...

  • MPU6050 WITH BUILT IN KALMAN FILTER TILT COMPENSATION (INCLINOMETER)
    Available
    MPU6050 WITH BUILT IN KALMAN FILTER TILT COMPENSATION (INCLINOMETER)_A0259

    Serial MPU6050 module is semi-hole design, the purpose is to direct the user to install the patch above his own board, with its own PCB as one, totally natural. If you are testing, suggest that you buy 6050 module plus 1 per floor, will be converted to a full-bore semi-holes for easy soldering. Effect after the 6050 assembly module and backplane as follows:

    Serial MPU6050 module is semi-hole design, the purpose is to direct the user to install...

    Serial MPU6050 module is semi-hole design, the purpose is to direct the user to install the patch above his own board, with its own PCB as one, totally natural. If you are...

  •  BMP180 DIGITAL BAROMETRIC PRESSURE SENSOR BOARD MODULE
    Available
    BMP180 DIGITAL BAROMETRIC PRESSURE SENSOR BOARD MODULE_A0173

    Description: Quantity : 1pc Size: 21mm x 18mm 1.8V to 3.6V Supply Voltage Max I2C Speed: 3.5Mhz Low power consumption - 0.5uA at 1HzI2C interface Very low noise - up to 0.02hPa (17cm) Full calibratedPressure Range: 300hPa to 1100hPa (+9000m to -500m)

    Description: Quantity : 1pc Size: 21mm x 18mm 1.8V to 3.6V Supply Voltage Max I2C...

    Description: Quantity : 1pc Size: 21mm x 18mm 1.8V to 3.6V Supply Voltage Max I2C Speed: 3.5Mhz Low power consumption - 0.5uA at 1HzI2C interface Very low noise - up to 0.02hPa...

  • MPU-9150 9 DOF IMU (ACCELLEROMETER+GYRO +MEGNETOMETER) 3 IN 1
    Available
    GY-9150 MPU-9150 9 DOF IMU (ACCELLEROMETER+GYRO +MEGNETOMETER) 3 IN 1_A0139

    Description: The MPU-9150™ is the world’s first 9-axis MotionTracking device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors. The MPU9150 is a System in Package (SiP) that combines two chips: the MPU-6050, which contains a 3-axisgyroscope, 3-axis accelerometer, and an onboard DMP

    Description: The MPU-9150™ is the world’s first 9-axis MotionTracking device designed...

    Description: The MPU-9150™ is the world’s first 9-axis MotionTracking device designed for the low power, low cost, and high performance requirements of consumer electronics...

  • AHRS 9DOF IMU WITH ON-BOARD ATMEGA328 MODULE(ITG3205 + ADXL345 + HMC5883L + ATMEGA328)
    Available
    GY-951 9DOF IMU WITH ON-BOARD ATMEGA328 MODULE(ITG3205 + ADXL345 + HMC5883L + ATMEGA328)_A0112

    Description: Model: GY-951 Using the chip: Atmega328 + ITG3205 + the ADXL345 + HMC5883L Power supply :3-5V Means of communication: serial communication protocol Size: 2.3cm * 1.7cm

    Description: Model: GY-951 Using the chip: Atmega328 + ITG3205 + the ADXL345 +...

    Description: Model: GY-951 Using the chip: Atmega328 + ITG3205 + the ADXL345 + HMC5883L Power supply :3-5V Means of communication: serial communication protocol Size: 2.3cm * 1.7cm

  • 10DOF IMU (L3G4200D + ADXL345 + HMC5883L + BMP085)
    Available
    GY-80 10DOF IMU (L3G4200D + ADXL345 + HMC5883L + BMP085)_A0100

    Description: Nine axis module (three-axis gyroscope + triaxial accelerometer + 3-axis magnetic field + pressure) Power supply :3-5v Communication: IIC communication protocol (fully compatible with 3-5v system) Module size: 25.8mm * 16.8mm, mounting hole 3mm

    Description: Nine axis module (three-axis gyroscope + triaxial accelerometer +...

    Description: Nine axis module (three-axis gyroscope + triaxial accelerometer + 3-axis magnetic field + pressure) Power supply :3-5v Communication: IIC communication protocol...

  • 6DOF IMU MPU-6050 3-AXIS GYRO+ACCELEROMETER MODULE
    Available
    GY-521 6DOF IMU MPU-6050 3-AXIS GYRO+ACCELEROMETER MODULE_A0035

    FeaturesName: MPU-6050 module (three axis gyro + three axis acceleration) Use chip: MPU-6050 The power supply: 3-5 v (internal low voltage difference voltage stabilizing) Communication: standard IIC communication agreement Chip built-in 16 bit AD converter, 16 bits of data output The gyroscope range: + 250 500 1000 2000 /s Acceleration range: 2 4 8 16 g 

    FeaturesName: MPU-6050 module (three axis gyro + three axis acceleration) Use chip:...

    FeaturesName: MPU-6050 module (three axis gyro + three axis acceleration) Use chip: MPU-6050 The power supply: 3-5 v (internal low voltage difference voltage stabilizing)...

  • ADXL335 3-AXIS ACCELEROMETER MODULE (ANALOG OUTPUT )
    Available
    GY-61 ADXL335 3-AXIS ACCELEROMETER MODULE (ANALOG OUTPUT )_A0032

    Features: Chip: ADXL335. Power supply: 3.3-5V. X,Y,Z output.

    Features: Chip: ADXL335. Power supply: 3.3-5V. X,Y,Z output.

    Features: Chip: ADXL335. Power supply: 3.3-5V. X,Y,Z output.

  • ADXL345 3-AXIS ACCELEROMTER MODULE (DIGITAL OUTPUT)
    Available
    GY-291 ADXL345 3-AXIS ACCELEROMTER MODULE (DIGITAL OUTPUT)_A0028

    Description : The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is acces-sible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. 

    Description : The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with...

    Description : The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as...

  •  HMC5883L TRIPLE AXIS MAGNETOMETER ( 3-AXIS DIGITAL COMPASS ) MODULE
    Available
    GY-271 3-AXIS HMC5883L DIGITAL MAGNETOMETER/COMPASS MODULE _A0026

    Using a magnetometer can be a little tricky, especially if you are unsure about the formulas to use to get the correct bearing and when other magnetic objects are interfering with your signal. You could download a arduino library for this module, which will also be compatible with other HMC5883L breakout boards made by other manufacturers.

    Using a magnetometer can be a little tricky, especially if you are unsure about the...

    Using a magnetometer can be a little tricky, especially if you are unsure about the formulas to use to get the correct bearing and when other magnetic objects are interfering...

  • 9DOF IMU ADXL345 + HMC5883L + ITG3205
    Available
    9DOF IMU ADXL345 + HMC5883L + ITG3205_A0015

    Specifications: Nine axis modules (three-axis gyro three axis acceleration tri-axial magnetic field) Using immersion gold plating PCB process Chip: ITG3205 ADXL345 HMC5883L Power supply: 3v-5V power

    Specifications: Nine axis modules (three-axis gyro three axis acceleration tri-axial...

    Specifications: Nine axis modules (three-axis gyro three axis acceleration tri-axial magnetic field) Using immersion gold plating PCB process Chip: ITG3205 ADXL345 HMC5883L...

  • BLUETOOTH MODULE HC-06/05 VERSION 1.5
    Available
    BLUETOOTH MODULE HC-06 VERSION 1.5_A0088

    The Bluetooth Modem is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC-05/HC-06 module. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target.

    The Bluetooth Modem is the latest Bluetooth wireless serial cable! This version of the...

    The Bluetooth Modem is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC-05/HC-06 module. These modems work as a serial (RX/TX) pipe....

  • SERIAL TO WIFI MODULE TLN13UA06 (UART-WIFI MODULE, NETWORK SERVER/CLIENT )
    Out of stock
    SERIAL TO WIFI MODULE TLN13UA06 (UART-WIFI MODULE, NETWORK SERVER/CLIENT )_A0079

    Applications Intelligent transportation networks, such as wireless credit card machine Instrumentation, equipment parameter monitoring, Microfinance payment networks, such as wireless POS machines Industrial networking equipment, such as wireless sensors WIFI remote control, WIFI toys (model aircraft, remote control cars) WIFI POS machine, WIFI, electronic scales, WIFI chip control 

    Applications Intelligent transportation networks, such as wireless credit card machine...

    Applications Intelligent transportation networks, such as wireless credit card machine Instrumentation, equipment parameter monitoring, Microfinance payment networks, such as...

    ₨ 1,600
    Add to cart View
  • VIBRATION SENSOR MODULE
    Available
    VIBRATION SENSOR MODULE_A0248

    The Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer.

    The Vibration module based on the vibration sensor SW-420 and Comparator LM393 to...

    The Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by...

  • INE HUNTING /INFRARED TRACKING SENSOR MODULE_A0243
    Available
    INE HUNTING /INFRARED LINE TRACKING SENSOR MODULE_A0243

      Photosensitive diode Working power: + 5V Working current: < 10mA Working temperature range: 0'C 50'C Output electrical level signal: TTL Output interface: 3 wire Easy to installpin1. gnd2. out3. 5vcc

      Photosensitive diode Working power: + 5V Working current: < 10mA Working...

      Photosensitive diode Working power: + 5V Working current: < 10mA Working temperature range: 0'C 50'C Output electrical level signal: TTL Output interface: 3 wire Easy to...

  • 5-CHANNEL FLAME SENSOR MODULE
    Available
    5-CHANNEL FLAME SENSOR MODULE_A0241

    . 5 channel infrared flame sensor design, wide range of detection (the detection range of the ordinary single flame sensor is probably about 30°, as the distance increases, the range is gradually reduced, the detection range of the product is greater than 120°). Able to output a digital signal (high and low), easy to use.

    . 5 channel infrared flame sensor design, wide range of detection (the detection range...

    . 5 channel infrared flame sensor design, wide range of detection (the detection range of the ordinary single flame sensor is probably about 30°, as the distance increases, the...

  • DS18B20 DIGITAL TEMPERATURE SENSOR
    Available
    DS18B20 DIGITAL TEMPERATURE SENSOR_A0179

    Description: This is the latest DS18B20 1-Wire digital temperature sensor from Maxim IC. Reports degrees C with 9 to 12-bit precision, -55C to 125C (+/-0.5C). Each sensor has a unique 64-Bit Serial number etched into it - allows for a huge number of sensors to be used on one data bus. This is a wonderful part that is the corner stone of many data-logging and temperature control projects.

    Description: This is the latest DS18B20 1-Wire digital temperature sensor from Maxim...

    Description: This is the latest DS18B20 1-Wire digital temperature sensor from Maxim IC. Reports degrees C with 9 to 12-bit precision, -55C to 125C (+/-0.5C). Each sensor has a...

  • TILT SENSOR MODULE
    Available
    TILT SENSOR MODULE_A0242

    Model SW-520DQuantity: 1Color: BlueMaterial: PCBFeatures: The output can be directly connected with the single chip microcomputer, through the single chip microcomputer to detect the high and low level, thus to detect angle change.Application: Angular transducer, tilt slant angle sensorOther Working voltage: 3.3~5V; Output form: number switch output(0 & 1); LM393 comparator  

    Model SW-520DQuantity: 1Color: BlueMaterial: PCBFeatures: The output can be directly...

    Model SW-520DQuantity: 1Color: BlueMaterial: PCBFeatures: The output can be directly connected with the single chip microcomputer, through the single chip microcomputer to...

  • SMOKE/GAS SENSOR MODULE MQ-2
    Available
    SMOKE/GAS SENSOR MODULE MQ-2_A0172

    This Gas Sensor Module features an MQ-2 sensor which can detect alcohol, carbon monoxide, smoke and other harmful gases. The MQ-2 sensor is a versatile gas sensor capable of detecting a wide range of gases including: alcohol, carbon monoxide, hydrogen, isobutene, liquefied petroleum gas, methane, propane and smoke. This module has both a 3 pin male header interface and a "grove" style connector.

    This Gas Sensor Module features an MQ-2 sensor which can detect alcohol, carbon...

    This Gas Sensor Module features an MQ-2 sensor which can detect alcohol, carbon monoxide, smoke and other harmful gases. The MQ-2 sensor is a versatile gas sensor capable of...

  • WATER LEVEL SENSOR MODULE
    Out of stock
    Water /Rain Drop Sensor Module_A0135

    Product Specifications:Product Name: water level sensor Operating voltage: DC3-5V Operating Current: less than 20mA Sensor Type: Analog Detection area: 40mm x 16mm Production process: FR4 double-sided HASL Operating temperature: 10 Degree to - 30 Degree Humidity: 10% -90% non-condensing Product weight: 3.5g Size: 62mm x 20mm x 8mm 

    Product Specifications:Product Name: water level sensor Operating voltage: DC3-5V...

    Product Specifications:Product Name: water level sensor Operating voltage: DC3-5V Operating Current: less than 20mA Sensor Type: Analog Detection area: 40mm x 16mm Production...

    ₨ 100
    Add to cart View
  • SOIL MOISTURE SENSOR
    Available
    Soil Moister Sensor/ Soil Hygrometer _A0009

    Description: This is a simple water sensor ,can be used to detect soil moisture .Module Output is high level when the soil moisture deficit, or output is low. Can be used in module plant waterer device, and the plants in your garden no need people to manage Adjustable sensitivity by adjusting the digital potentiometer (shown in blue) Operating voltage:3.3V~5V

    Description: This is a simple water sensor ,can be used to detect soil moisture .Module...

    Description: This is a simple water sensor ,can be used to detect soil moisture .Module Output is high level when the soil moisture deficit, or output is low. Can be used in...

  • MICROPHONE SOUND DETECTION SENSOR MODULE
    Available
    MICROPHONE SOUND DETECTION SENSOR MODULE_A0149

    Features high sensitivity, Electret Condenser Microphone (ECM) sensor Power supply indicator lamp Comparator output indicator lamp AO, real-time microphone voltage signal output DO, high / low electric level signal output Analog quantity output Threshold rollover electric level output Sensitivity adjusted by potentiometer Power Supply: 5V DC

    Features high sensitivity, Electret Condenser Microphone (ECM) sensor Power supply...

    Features high sensitivity, Electret Condenser Microphone (ECM) sensor Power supply indicator lamp Comparator output indicator lamp AO, real-time microphone voltage signal output...

  • 18B20 TEMPERATURE SENSOR MODULE
    Available
    18B20 TEMPERATURE SENSOR MODULE_A0142

    Description: The product is produced by the United States DALLAS DS18B20 digital temperature sensor can be  networking chip packaging is made with abrasion resistant touch, small size, easy to use, packaged  in various forms, for a variety of small spaces digital temperature measurement and control equipment. 

    Description: The product is produced by the United States DALLAS DS18B20 digital...

    Description: The product is produced by the United States DALLAS DS18B20 digital temperature sensor can be  networking chip packaging is made with abrasion resistant touch,...

  • MQ-5 NATURAL GAS SENSOR MODULE
    Available
    MQ-5 NATURAL GAS SENSOR MODULE_A0111

    DescriptionThe analog gas sensor - MQ5 is used in gas leakage detecting equipments in consumer and industry markets, this sensor is suitable for detecting LPG, ibutane, propane, methane ,alcohol, Hydrogen, smoke.It has a high sensitivity and fast response time.And the sensitivity can be adjusted by the potentiometer. Size: 38x27mm

    DescriptionThe analog gas sensor - MQ5 is used in gas leakage detecting equipments in...

    DescriptionThe analog gas sensor - MQ5 is used in gas leakage detecting equipments in consumer and industry markets, this sensor is suitable for detecting LPG, ibutane, propane,...

  • FLAME SENSOR (FIRE DETECTOR) MODULE RED
    Available
    FLAME SENSOR (FIRE DETECTOR) MODULE RED_A0020

    flame wavelengths between 760 nm to 1100 nm infrared is most sensitive. Module has two outputs:1, AO, analog output, real-time output voltage signal on the thermal resistance2, DO, when the temperature reaches a certain threshold, the output high and low signal threshold adjustable via potentiometer Power supply: DC 3-5.5VAnalog output

    flame wavelengths between 760 nm to 1100 nm infrared is most sensitive. Module has two...

    flame wavelengths between 760 nm to 1100 nm infrared is most sensitive. Module has two outputs:1, AO, analog output, real-time output voltage signal on the thermal resistance2,...

  • Available
    HC-SR501 PIR HUMANMOTION DETECTOR SENSOR_A0003

    Type: HC--SR501 Body Sensor ModuleOperating voltage range: DC 4.5-20VQuiescent Current: <50uA Trigger: L can not be repeated trigger/H can be repeated trigger (Default repeated trigger)

    Type: HC--SR501 Body Sensor ModuleOperating voltage range: DC 4.5-20VQuiescent Current:...

    Type: HC--SR501 Body Sensor ModuleOperating voltage range: DC 4.5-20VQuiescent Current: <50uA Trigger: L can not be repeated trigger/H can be repeated trigger (Default...

  • ADJUSTABLE BOOST /STEP-UP CONVERTER MODULE 150W, DC 10-32V TO DC 12-35V
    Out of stock
    ADJUSTABLE BOOST /STEP-UP CONVERTER MODULE 150W, DC 10-32V TO DC 12-35V_A0115

    Description: Module Properties: non-isolated step-up module (BOOST) 65 * 56.5 * 23 (length * width * high) (mm)Input voltage :10-32VOutput voltage: 12-35V (adjustable)Output Current: 6A (MAX)Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A)

    Description: Module Properties: non-isolated step-up module (BOOST) 65 * 56.5 * 23...

    Description: Module Properties: non-isolated step-up module (BOOST) 65 * 56.5 * 23 (length * width * high) (mm)Input voltage :10-32VOutput voltage: 12-35V (adjustable)Output...

    ₨ 500
    Add to cart View
  • INFRARED (IR) OBSTACLE AVOIDANCE SENSOR
    Available
    INFRARED (IR) OBSTACLE AVOIDANCE SENSOR_A0086

    eatures:   object is sensed output 0, output 1 is not sensitive to the time, directly with 3V and 5V microcontroller IO port connected.

    eatures:   object is sensed output 0, output 1 is not sensitive to the time, directly...

    eatures:   object is sensed output 0, output 1 is not sensitive to the time, directly with 3V and 5V microcontroller IO port connected.

  • Available
    HC-SR04 Ultrasonic Sensor Module_A0001

    Ultrasonic ranging module HC-SR04 provides 2cm - 400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules includes ultrasonic transmitters, receiver and control circuit.

    Ultrasonic ranging module HC-SR04 provides 2cm - 400cm non-contact measurement...

    Ultrasonic ranging module HC-SR04 provides 2cm - 400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules includes ultrasonic transmitters,...

  • 2 CHANNEL 5V RELAY MODULE
    Out of stock
    2 CHANNEL 5V RELAY MODULE_A0252

    The 2 channel 5V relay module provides 2 optically isolated inputs that accept a wide range of voltage, including the 3VDC and 5VDC signals available on the Arduino. This is a great way to switch on or off AC or DC loads using your Arduino.

    The 2 channel 5V relay module provides 2 optically isolated inputs that accept a wide...

    The 2 channel 5V relay module provides 2 optically isolated inputs that accept a wide range of voltage, including the 3VDC and 5VDC signals available on the Arduino. This is a...

    ₨ 300
    Add to cart View
  • ACTIVE BUZZER MODULE
    Out of stock
    ACTIVE BUZZER MODULE_A0250

    1, Onboard active buzzer 2, Onboard the 8550 transistor drive 3, active low, can direct connect with single-chip IO control 4, Working voltage: 5V 5, the board size: 22 (mm) x12 (mm)

    1, Onboard active buzzer 2, Onboard the 8550 transistor drive 3, active low, can direct...

    1, Onboard active buzzer 2, Onboard the 8550 transistor drive 3, active low, can direct connect with single-chip IO control 4, Working voltage: 5V 5, the board size: 22 (mm) x12...

    ₨ 150
    Add to cart View
  • SINGLE CHANNEL RELAY MODULE 5V DC
    Out of stock
    SINGLE CHANNEL RELAY MODULE 5V DC_A0249

    This 5V relay module is active HIGH meaning that HIGH level will activate the relay on and LOW level will deactivate it. Module can be controlled by a wide range of micro-controllers such as Raspberry Pi, Arduino, PIC, AVR, BeagleBone and many more. Convenient 

    This 5V relay module is active HIGH meaning that HIGH level will activate the relay on...

    This 5V relay module is active HIGH meaning that HIGH level will activate the relay on and LOW level will deactivate it. Module can be controlled by a wide range of...

    ₨ 200
    Add to cart View
  • DP83848 ETHERNET BOARD
    Available
    DP83848 ETHERNET BOARD_A0245

    Overview The DP83848 Ethernet Board is an accessory board includes an onboard Ethernet Physical Layer Transceiver DP83848, RJ45 connector, and control interface.

    Overview The DP83848 Ethernet Board is an accessory board includes an onboard Ethernet...

    Overview The DP83848 Ethernet Board is an accessory board includes an onboard Ethernet Physical Layer Transceiver DP83848, RJ45 connector, and control interface.

  • 5V-3V FOUR CHANNEL LEVEL CONVERTER MODULE(FOR UART/IIC/1-WIRE/SPI)
    Available
    5V-3V FOUR CHANNEL LEVEL CONVERTER MODULE(FOR UART/IIC/1-WIRE/SPI)_A0125

    Features: Four MOS tube : four channel , two-way conversation 3V and 5V The power input with anti-reverse protection, integrated 3.3VLDO,and provide current less than 150mA With power indicate Used for UART/IIC/1-WIRE/SPI 

    Features: Four MOS tube : four channel , two-way conversation 3V and 5V The power input...

    Features: Four MOS tube : four channel , two-way conversation 3V and 5V The power input with anti-reverse protection, integrated 3.3VLDO,and provide current less than 150mA With...

  • MAX3232 RS232 SERIAL PORT TO TTL CONVERTER MODULE WITH DB9 CONNECTOR
    Out of stock
    MAX3232 RS232 SERIAL PORT TO TTL CONVERTER MODULE WITH DB9 CONNECTOR_A0124

    Specifications: Weight:16 g Color: as picture show Size:27mmx30mm/1.06"x1.18"(inch) (approx) WorkingVoltage: 3V-5V Pin definition: GND,RXD,TXD,VCC,+5V

    Specifications: Weight:16 g Color: as picture show Size:27mmx30mm/1.06"x1.18"(inch)...

    Specifications: Weight:16 g Color: as picture show Size:27mmx30mm/1.06"x1.18"(inch) (approx) WorkingVoltage: 3V-5V Pin definition: GND,RXD,TXD,VCC,+5V

    ₨ 250
    Add to cart View
  • PL2303, USB TO RS232 TTL CONVERTER MODULE
    Available
    PL2303, USB TO RS232 TTL CONVERTER MODULE_A0107

    Product Features: Using PL2303hx Support windows 8 Supports three power modes: 5V external power supply; 3.3V external power supply; externally powered (requires 3.3V-5V) With 3 LED: TXD LED, RXD LED, POWER LED  

    Product Features: Using PL2303hx Support windows 8 Supports three power modes: 5V...

    Product Features: Using PL2303hx Support windows 8 Supports three power modes: 5V external power supply; 3.3V external power supply; externally powered (requires 3.3V-5V) With 3...

  • USB TO RS-232 CONVERTER CABLE
    Available
    USB TO RS-232 CONVERTER CABLE_A0099

    The USB to Serial Adapter Cable lets you connect DB9 RS232 serial devices to your Mac or PC laptop or desktop computer through an available USB port, as though the computer offered an onboard DB9M connector.  Simple to install and use, this USB to Serial adapter provides a cost-effective solution that bridges the compatibility gap between modern computers and legacy serial peripherals.

    The USB to Serial Adapter Cable lets you connect DB9 RS232 serial devices to your Mac...

    The USB to Serial Adapter Cable lets you connect DB9 RS232 serial devices to your Mac or PC laptop or desktop computer through an available USB port, as though the computer...

  • ENC28J60 ETHERNET LAN MODULE
    Available
    ENC28J60 ETHERNET LAN MODULE_A0074

    The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz.

    The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet...

    The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol...

  •  FT232RL USB TO SERIAL CONVERTER MODULE
    Available
    FT232RL USB TO SERIAL CONVERTER MODULE_A0071

    Description: Very low-cost way to add USB capability to an Arduino or other microcontroller. Use to give your own breadboard Arduino USB capability for bootloading or downloading sketches. Note: this board includes a DTR pin needed to auto-reset Arduino when downloading to your device.

    Description: Very low-cost way to add USB capability to an Arduino or other...

    Description: Very low-cost way to add USB capability to an Arduino or other microcontroller. Use to give your own breadboard Arduino USB capability for bootloading or...

  • FT232RL Xbee Adapter _A0010
    Available
    XBee Explorer Dongle (Adapter/Explorer/Programmer) FT232RL with USB cable _A0010

      Features: Bee Adapter V1.2 is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated  FT232RL IC, It can be used for programming or communicating with board which basic Arduino but without USB  interface, like Sniffer Nano. On the other hand, you may connect your PC to various wireless applications via the BEE  compatible modules.

      Features: Bee Adapter V1.2 is a compact USB to serial adapter equipped with BEE...

      Features: Bee Adapter V1.2 is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated  FT232RL IC, It can be used for programming or...

  • ROTARY ENCODER MODULE
    Out of stock
    ROTARY ENCODER MODULE_A0144

    Description: These are continuous rotary encoder switcWith built in push button switch (push to operate)

    Description: These are continuous rotary encoder switcWith built in push button switch...

    Description: These are continuous rotary encoder switcWith built in push button switch (push to operate)

    ₨ 270
    Add to cart View
  • DUAL-AXIS XY JOYSTICK MODULE
    Available
    DUAL-AXIS XY JOYSTICK MODULE_A0108

    Dual-axis XY Joystick Module for Arduino Dimensions: 4 X 2.6 X 3.2CM2 potentiometers for 2 axes1 switchConnector: +5Vcc - GND - VRx - VRy - SW

    Dual-axis XY Joystick Module for Arduino Dimensions: 4 X 2.6 X 3.2CM2 potentiometers...

    Dual-axis XY Joystick Module for Arduino Dimensions: 4 X 2.6 X 3.2CM2 potentiometers for 2 axes1 switchConnector: +5Vcc - GND - VRx - VRy - SW

  • OV7670 300KP VGA CAMERA MODULE
    Available
    OV7670 300KP VGA CAMERA MODULE_A0063

    OV7670 image sensor, small size, low operating voltage, and provides all the features of the single-chip VGA camera and image processor. 

    OV7670 image sensor, small size, low operating voltage, and provides all the features...

    OV7670 image sensor, small size, low operating voltage, and provides all the features of the single-chip VGA camera and image processor. 

  • SD CARD READER MODULE
    Available
    SD CARD READER MODULE_A0039

    Features: Brand new and high quality. 1.SD Card module can make your SD application more easier and simple.

    Features: Brand new and high quality. 1.SD Card module can make your SD application...

    Features: Brand new and high quality. 1.SD Card module can make your SD application more easier and simple.

  • DS1307 I2C RTC 24C32 REAL TIME CLOCK MODULE_A0038
    Available
    DS1307 I2C RTC 24C32 REAL TIME CLOCK MODULE_A0038

    Description: 1.DS1307 I2C real-time clock chip (RTC).2.24c32 32k I2C EEPROM memory.3.The LIR2032 rechargeable lithium battery, and belt charging circuit.

    Description: 1.DS1307 I2C real-time clock chip (RTC).2.24c32 32k I2C EEPROM...

    Description: 1.DS1307 I2C real-time clock chip (RTC).2.24c32 32k I2C EEPROM memory.3.The LIR2032 rechargeable lithium battery, and belt charging circuit.

  • Available
    4 CHANNEL RELAY MODULE_A0002

    4-Channel 5V Relay Module Expansion Board (Can be used as Dual H-bridge module)

    4-Channel 5V Relay Module Expansion Board (Can be used as Dual H-bridge module)

    4-Channel 5V Relay Module Expansion Board (Can be used as Dual H-bridge module)

  • PROTOSHIELD V3 + MINI PROTOBOARD FOR ARDUINO MEGA
    Available
    PROTOSHIELD V3 + MINI PROTOBOARD FOR ARDUINO MEGA_A0262

    MEGA ProtoShield V3 Prototype Shield Gold PCB processing technology, motherboards, small gold square pad spacing, welding components easier. SOP28 SMD component package to be more handy electronics enthusiasts will not be directly insert bound components. 

    MEGA ProtoShield V3 Prototype Shield Gold PCB processing technology, motherboards,...

    MEGA ProtoShield V3 Prototype Shield Gold PCB processing technology, motherboards, small gold square pad spacing, welding components easier. SOP28 SMD component package to be...

  • PROTOSHIELD + MINI PROTOBOARD FOR ARDUINO UNO
    Available
    PROTOSHIELD + MINI PROTOBOARD FOR ARDUINO UNO_A0261

    100% brand new and high quality Arduino protoshield prototype with 170 mini breadboard. 1 reset button, 1 general use button, and 2 LED circuits can be used directly. The mini breadboard has 170 tie points.

    100% brand new and high quality Arduino protoshield prototype with 170 mini...

    100% brand new and high quality Arduino protoshield prototype with 170 mini breadboard. 1 reset button, 1 general use button, and 2 LED circuits can be used directly. The mini...