Categories

Specials

All specials

Best sellers

All best sellers

Power (Voltage& Current) Modules There are 49 products.

  • Out of stock
    5 in 1 LCD Battery Capacity Checker _A1279

    1: shows the battery capacity,2: discharge the battery,3: the battery balancing,4: test the battery internal resistance,5: test steeringSize: 83mm*50mm*15mmNet Weight: 38gPackage Weight: 56g

    1: shows the battery capacity,2: discharge the battery,3: the battery balancing,4: test...

    1: shows the battery capacity,2: discharge the battery,3: the battery balancing,4: test the battery internal resistance,5: test steeringSize: 83mm*50mm*15mmNet Weight:...

    ₨ 1,270
    Add to cart View
  • Available
    50A 75mV FL-2 DC Current Shunt Resistor For Amp Ampere Panel Meter _A1195

    High quality and good performance.Used for a DC 50A current Amp meter.Easy to install.Accuracy: Class 0.Voltage Drop: 75MV.Specifications :Color: BlackMaterial: Steel, cupro-managanese, plasticDimension (L x W x H): Approx. 4 1/2 x 1 x 3/4 inch (12 x 2.5 x 1.8cm) Datasheet: http://www.token.com.tw/pdf/current-sense/shunt-resistors.pdf

    High quality and good performance.Used for a DC 50A current Amp meter.Easy to...

    High quality and good performance.Used for a DC 50A current Amp meter.Easy to install.Accuracy: Class 0.Voltage Drop: 75MV.Specifications :Color: BlackMaterial: Steel,...

  • Available
    5A DC-DC Adjustable Step-down Module Input 4~38V _A1183

    Performance parameters:Input voltage range:4-38VDC(Note:input voltage not exceeding 38V)Output voltage range:1.25-36VDC adjustableOutput current: 0-5AOutput power: 75WHigh efficiency up to 96 percentBuilt in thermal shutdown functionBuilt in current limit functionBuilt in output short protection functionInput reverse polarity protection:... More detail given below

    Performance parameters:Input voltage range:4-38VDC(Note:input voltage not exceeding...

    Performance parameters:Input voltage range:4-38VDC(Note:input voltage not exceeding 38V)Output voltage range:1.25-36VDC adjustableOutput current: 0-5AOutput power: 75WHigh...

  • Active Single Phase Voltage Transformer Module AC Output Voltage Sensor for Arduino Mega
    Available
    Wide Range AC Voltage Sensor Module _A1169

    Sensor : ZMPT101BOnboard precision miniature voltage transformerOnboard high-precision op amp circuits for signal sampling and adequate compensation to make precise functionsModules can be measured within the 250V AC voltage, the corresponding analog output can be adjustedPCB board size: 49.5 (mm) x19.4 (mm)Datasheet: http://www.zeming-e.com/file/0_2013_10_18_093344.pdf

    Sensor : ZMPT101BOnboard precision miniature voltage transformerOnboard high-precision...

    Sensor : ZMPT101BOnboard precision miniature voltage transformerOnboard high-precision op amp circuits for signal sampling and adequate compensation to make precise...

  • HLK-PM01 AC-DC 100-240V to 5V Mini Power Supply Module
    Available
    AC-DC 240V AC to 5V DC Mini Power Supply Module _A1152

    .Product Features1). The ultra-thin, subminiature2). The full voltage input (90 ~ 264 Vac)3). Low ripple and low noise4). Output overload short circuit protection function More detail given below HLK-PM01 AC-DC 100-240V to 5V 

    .Product Features1). The ultra-thin, subminiature2). The full voltage input (90 ~ 264...

    .Product Features1). The ultra-thin, subminiature2). The full voltage input (90 ~ 264 Vac)3). Low ripple and low noise4). Output overload short circuit protection function More...

  • 5.5*2.1mm Standard DC Socket Module with LED Indicator 2 Channel Output DC Power Supply for Arduino 5V 9V 12V
    Available
    DC Power Socket Module with LED Indicator 5.5*2.1mm _A1135

    Size:5.5*2.1mmDC socket module, socket type 5.5x2.1 (most common standard). VCC presence witness LED. Traversing pads (holes) so a cable can be soldered in addition to the standard 2.54 square section male headers, whic are doubled on outputs (2 for VCC and 2 for ground).

    Size:5.5*2.1mmDC socket module, socket type 5.5x2.1 (most common standard). VCC...

    Size:5.5*2.1mmDC socket module, socket type 5.5x2.1 (most common standard). VCC presence witness LED. Traversing pads (holes) so a cable can be soldered in addition to the...

  • LM2577 DC-DC Adjustable Step-up Power Converter Module
    Available
    2.5A Boost LM2577 DC-DC Adjustable Step-up Power Converter Module _A1125

    Module Properties: non-isolated step-up module Input voltage :3-34V Output voltage: continuously adjustable (4-35V) Output Current: 2.5A (MAX) more detail given below

    Module Properties: non-isolated step-up module Input voltage :3-34V Output voltage:...

    Module Properties: non-isolated step-up module Input voltage :3-34V Output voltage: continuously adjustable (4-35V) Output Current: 2.5A (MAX) more detail given below

  • MT3608 2A Max DC-DC Step Up Power Module Booster Power Module For Arduino
    Available
    2A Booster DC-DC Step Up Power Module _A1106

    Model: MT3608The maximum output current: 2 aInput voltage: 2 v ~ 24 vThe maximum output voltage: > 5 v - 28 vEfficiency: > 93%Mechanical properties:Product size: 36 mm * 17 mm * 14 mm

    Model: MT3608The maximum output current: 2 aInput voltage: 2 v ~ 24 vThe maximum output...

    Model: MT3608The maximum output current: 2 aInput voltage: 2 v ~ 24 vThe maximum output voltage: > 5 v - 28 vEfficiency: > 93%Mechanical properties:Product size: 36 mm *...

  •  INA219 DC Current Sensor Breakout 26V INA219B High Side I2C Address
    Available
    INA219 26V DC I2C Base Current Sensor _A1036

    This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measures both the high side voltage and DC current draw over I2C with 1% precision. More detail given below

    This breakout board will solve all your power-monitoring problems. Instead of...

    This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both...

  • MAX471 Voltage Current Volt Amp Test Sensor Module for Arduino
    Available
    GY - 471 MAX471 Voltage and Current Sensor Module _A1033

    This module can be used to test the current and voltage.The principle of voltage test based on the principle of resistive voltage divider design can make the red terminal connector input voltage to 5 times smaller. Arduino analog input voltages up to 5 v, the voltage detection module input voltage not greater than 5Vx5=25V (if using 3.3V systems, More detail given below

    This module can be used to test the current and voltage.The principle of voltage test...

    This module can be used to test the current and voltage.The principle of voltage test based on the principle of resistive voltage divider design can make the red terminal...

  • TIP41C TIP41 Power Transistor NPN 100V 6A 65W TO-220 Transistors
    Out of stock
    TIP41C TIP41 Power Transistor NPN 100V 6A 65W TO-220 Transistors _A0887

    Current - Collector Cutoff (Max): 700 & micro; A The maximum collector current - Base DC voltage: 120V max Emitter DC voltage: 100V max Base DC voltage: 5V max Most significant junction temperature: 150 degrees Celsius maximum Package: DIP TO-220 package

    Current - Collector Cutoff (Max): 700 & micro; A The maximum collector current -...

    Current - Collector Cutoff (Max): 700 & micro; A The maximum collector current - Base DC voltage: 120V max Emitter DC voltage: 100V max Base DC voltage: 5V max Most...

    ₨ 20
    Add to cart View
  • TIP41C
    Available
    TIP41C 6A 100V General power NPN Transistor (Original) _A0878

    datasheet : https://www.fairchildsemi.com/datasheets/TI/TIP41C.pdf

    datasheet : https://www.fairchildsemi.com/datasheets/TI/TIP41C.pdf

    datasheet : https://www.fairchildsemi.com/datasheets/TI/TIP41C.pdf

  • TIP42C
    Available
    TIP42C 6A 100V General PNP Transistor (Original) _A0877

    datasheet: https://www.fairchildsemi.com/datasheets/TI/TIP42.pdf

    datasheet: https://www.fairchildsemi.com/datasheets/TI/TIP42.pdf

    datasheet: https://www.fairchildsemi.com/datasheets/TI/TIP42.pdf

  • TIP42C TIP42 Power Transistor PNP 100V 6A 65W TO-220 Transistors
    Out of stock
    TIP42C TIP42 Power Transistor PNP 100V 6A 65W TO-220 Transistors _A0886

    Current Rating: 6A Voltage Rated:        100V Transistor Type:  PNP Features:  Medium Power Linear & Switching

    Current Rating: 6A Voltage Rated:        100V Transistor Type:  PNP Features:  Medium...

    Current Rating: 6A Voltage Rated:        100V Transistor Type:  PNP Features:  Medium Power Linear & Switching

    ₨ 20
    Add to cart View
  • 4.5V-7V to 3.3V AMS1117-3.3V Power Supply Module AMS1117-3.3 Power Supply Module
    Available
    4.5V-7V to 3.3V AMS1117-3.3V Power Supply Module_A0865

    2P single row pin input and outputDual-panel designSpecially designed two rows of needle fixing holes can be fixed directly in the tunnel for the board to extend the experimentInput: DC 4.5V--7V (Input Voltage must be Greater than the Output voltage high above 1V.)Output: 3.3V, 800mA (load current can not exceed 800ma)PCB board size: 2.5cm * 1.1cm

    2P single row pin input and outputDual-panel designSpecially designed two rows of...

    2P single row pin input and outputDual-panel designSpecially designed two rows of needle fixing holes can be fixed directly in the tunnel for the board to extend the...

  • 0.5A Mobile Power Bank Circuit Single 3.7V lithium battery to 5V Boost _A0866
    Available
    0.5A Mobile Power Bank Circuit Single 3.7V lithium battery to 5V Boost _A0866

    Description:Size: 38 * 10 * 4mmCharging voltage: 5VCharging current : 400-500MA become hot during charging is normal.Boost Output: 5VOutput current: 300 ~ 400MA; suitable for use in less demanding situations...more detail below

    Description:Size: 38 * 10 * 4mmCharging voltage: 5VCharging current : 400-500MA become...

    Description:Size: 38 * 10 * 4mmCharging voltage: 5VCharging current : 400-500MA become hot during charging is normal.Boost Output: 5VOutput current: 300 ~ 400MA; suitable for...

  • 10A DC to DC 48V to 12V Converter 120W _A0040
    Out of stock
    10A DC to DC 48V to 12V Converter 120W _A0040

    Power Model: MWX-48-12-120W (MAX) Input voltage: DC48V (wide voltage 30V-60V) Output voltage: DC: 12V, output current: 10A (output current adaptive load current), 120W (MAX) Instantaneous peak current MAX 11A, 10A or less long-term load 100% full power, synchronous rectification, and efficient conversion rate: more than 93% Ripple: 40MV V ...more detail given below

    Power Model: MWX-48-12-120W (MAX) Input voltage: DC48V (wide voltage 30V-60V) Output...

    Power Model: MWX-48-12-120W (MAX) Input voltage: DC48V (wide voltage 30V-60V) Output voltage: DC: 12V, output current: 10A (output current adaptive load current), 120W (MAX)...

    ₨ 4,500
    Add to cart View
  • IRF520 N-Channel MOSFET  Driver Module_A0862
    Available
    IRF520 N-Channel MOSFET Driver Module_A0862

    Description:Size: 33*24mmWeight: 10gVoltage: 3.3V, 5VPorts: Digital LevelOutput load voltage :0-24VOutput load current: <5A (1A above need to add heat sink)Datasheet Link: http://www.irf.com/product-info/datasheets/data/irf520.pdf ...more detail given below

    Description:Size: 33*24mmWeight: 10gVoltage: 3.3V, 5VPorts: Digital LevelOutput load...

    Description:Size: 33*24mmWeight: 10gVoltage: 3.3V, 5VPorts: Digital LevelOutput load voltage :0-24VOutput load current: <5A (1A above need to add heat sink)Datasheet Link:...

  • DC 0-100V DC Digital Voltmeter Meter 0.56 " Red Color _A0857
    Available
    DC 0-100V DC Digital Voltmeter Meter 0.56 " Red Color _A0857

    Description:The voltmeter compact , range DC DC0-100V, need external auxiliary power supply. Auxiliary supply voltage range wide, up to 4.5-30V, can work at 5V, 9V, 12V, 24V , etc., without regulation. With three wiring, easy access to car / battery car / motorcycle car lines, with reverse polarity protection, line ....more detail given below

    Description:The voltmeter compact , range DC DC0-100V, need external auxiliary power...

    Description:The voltmeter compact , range DC DC0-100V, need external auxiliary power supply. Auxiliary supply voltage range wide, up to 4.5-30V, can work at 5V, 9V, 12V, 24V ,...

  • 0-300V (4.5-30v Input) Green YB27 Voltmeter Voltage Meter 3 Wire_A0880
    Out of stock
    0-300V (4.5-30v Input) Green YB27 Voltmeter Voltage Meter 3 Wire_A0880

    Measuring range:DC 0-300V (two wires access) Current consumption: 5-15mA(generally), less than 20mA Display: three 0.56″ LED digital tube Display Color: Green Allowable error:1% (+/- 1 digit)

    Measuring range:DC 0-300V (two wires access) Current consumption: 5-15mA(generally),...

    Measuring range:DC 0-300V (two wires access) Current consumption: 5-15mA(generally), less than 20mA Display: three 0.56″ LED digital tube Display Color: Green Allowable error:1%...

    ₨ 450
    Add to cart View
  • YB27A -AC60-300V RED Digital Voltmeter _A0883
    Available
    YB27A -AC60-300V RED Digital Voltmeter _A0883

    Main Features: YB27A is a LED digital voltmeter with two-wire system and red display. Its measuring range is AC 60-300V. Product Descriptions: Features:- Adopting the capacitance step-down principle design, not suitable for high frequency occasion- Used to monitor the household voltmeter, also applied to other AC voltmeter measure...more detail given below

    Main Features: YB27A is a LED digital voltmeter with two-wire system and red display....

    Main Features: YB27A is a LED digital voltmeter with two-wire system and red display. Its measuring range is AC 60-300V. Product Descriptions: Features:- Adopting the...

  • Battery Level Indicator KA2284 /Power Line Voltage level Indicator _A0868
    Available
    Battery Level Indicator KA2284 /Power Line Voltage level Indicator _A0868

    KA2284 Power level indicator Battery Pro Audio level indicator module M70 Chip: KA2284 Supply voltage: 3.5V-12V; The magnitude of the level can be adjusted;- AC and DC signals can be controlled by jumper;- PCB board size: 29 (mm) x21 (mm)- Weight: 7 g

    KA2284 Power level indicator Battery Pro Audio level indicator module M70 Chip: KA2284...

    KA2284 Power level indicator Battery Pro Audio level indicator module M70 Chip: KA2284 Supply voltage: 3.5V-12V; The magnitude of the level can be adjusted;- AC and DC signals...

  • (0V -200V/ 50A-100A) Volt and Ampere Meter Red and Blue Display  YB27VA  _A0881
    Available
    (0V -200V/ 50A-100A) Volt and Ampere Meter Red and Blue Display YB27VA _A0881

    Input Power: DC 4.5 - 30 v measure voltage: dc 0-300 v voltage <100 V, resolution: 0.1 v voltage> = 100 v, resolution: 1 v measure current: 50A - 100A  ( require shunt to measure the current, please check the image description for the reference link) current resolution: 0.1a Operating Current: <20ma Display: 0:28 "led, in two colors, red and blue size: 48 x 29 x 21 mm

    Input Power: DC 4.5 - 30 v measure voltage: dc 0-300 v voltage <100 V, resolution:...

    Input Power: DC 4.5 - 30 v measure voltage: dc 0-300 v voltage <100 V, resolution: 0.1 v voltage> = 100 v, resolution: 1 v measure current: 50A - 100A  ( require shunt to...

  • 5V 3A 6S Power Distributor Board W/ Adjustable BEC Output _A0956
    Available
    5V 3A 6S Power Distributor Board W/ Adjustable BEC Output _A0956

    Features:Dual BEC strip of electrical output, with thick copper, immersion gold surface treatment, the maximum current through the support 100A, dual high efficiency BEC circuit structure, support 6S lithium input, one factory that is 12V, the other way using available transfer mode, the user can adjust their practical needs, support for 3-20V adjust...more detail given below

    Features:Dual BEC strip of electrical output, with thick copper, immersion gold surface...

    Features:Dual BEC strip of electrical output, with thick copper, immersion gold surface treatment, the maximum current through the support 100A, dual high efficiency BEC circuit...

  • 3.7V 1A Lithium-Ion Battery Charger USB Module TP4056 _A0854
    Available
    5V 1A 3.7V Lithium-Ion Cell / Battery Charger TP4056 mini USB Module _A0854

    Charge module- Linear charging.Current- 1A adjustable.Charge precision- 1.5%.Input voltage- 4.5V-5.5V.Full charge voltage- 4.2V.Led indicator- red is charging Blue is full charged.Input interface- mini USB.Work temperature- -10℃ to +85℃.Inversed polarity- NO.Size- small to 25X19X10mm...more detail given below

    Charge module- Linear charging.Current- 1A adjustable.Charge precision- 1.5%.Input...

    Charge module- Linear charging.Current- 1A adjustable.Charge precision- 1.5%.Input voltage- 4.5V-5.5V.Full charge voltage- 4.2V.Led indicator- red is charging Blue is full...

  • Power Module w/BEC for APM 2.5/2.6/2.8 Ardupilot (90A) _A0948
    Available
    Power Module w/BEC for APM 2.5/2.6/2.8 Ardupilot (90A) _A0948

    Specifications:Max input voltage: 30VMax current sensing: 90A Size:25*21*9mmNet weight:25gWeight :35gVoltage and current measurement configured for 5V ADCSwitching regulator outputs 5.3V and 3A max6-pos DF13 cable plugs directly to ...more detail given below

    Specifications:Max input voltage: 30VMax current sensing: 90A Size:25*21*9mmNet...

    Specifications:Max input voltage: 30VMax current sensing: 90A Size:25*21*9mmNet weight:25gWeight :35gVoltage and current measurement configured for 5V ADCSwitching regulator...

  • 5A 75W DC-DC Adjustable Step-down Module _A0908
    Out of stock
    5A 75W DC-DC Adjustable Step-down Module _A0908

    Features:1. LED power indicator.2. Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage; The nixie tube can be turned off by another button. Mentioned states are able to be memorized, is not lost even if the power is disconnected. (On-board marked "IN" LED is turned on, the nixie tube display...detail below

    Features:1. LED power indicator.2. Button to switch measurement of the input or output...

    Features:1. LED power indicator.2. Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage; The...

    ₨ 750
    Add to cart View
  • 10A DC-DC Buck Regulator/Step-down Module (1.2V-32V) Ajustable _A0846
    Available
    10A DC-DC Buck Regulator/Step-down Module (1.2V-32V) Ajustable _A0846

    Module Properties: non-isolated step-down module (BUCK) Synchronous rectification Input voltage :4-32V (limit 36V). Continuously adjustable output voltage :1.2-32V Minimum pressure difference of the input and output: 1V Output current :0-10A  The temperature does not exceed 60 degrees, when the natural cooling 6A for a long time . Please reduc ...detail given below

    Module Properties: non-isolated step-down module (BUCK) Synchronous rectification Input...

    Module Properties: non-isolated step-down module (BUCK) Synchronous rectification Input voltage :4-32V (limit 36V). Continuously adjustable output voltage :1.2-32V Minimum...

  • LT3844 EFE Linear Technology High Voltage, Current Mode Switching Regulator Controller with Programmable Operating Frequency
    Available
    LT3844 EFE Linear Technology High Voltage, Current Mode Switching Regulator Controller with Programmable Operating Frequency

    The LT®3844 is a DC/DC controller used for medium power, low part count, high effi ciency supplies. It offers a wide 4V to 60V input range (7.5V minimum start-up voltage) and can implement step-down, step-up, inverting and SEPIC topologies. The LT3844 includes Burst Mode operation, which reduces quiescent current below 120μA and maintains high effi - ciency at....more detail given below

    The LT®3844 is a DC/DC controller used for medium power, low part count, high effi...

    The LT®3844 is a DC/DC controller used for medium power, low part count, high effi ciency supplies. It offers a wide 4V to 60V input range (7.5V minimum start-up voltage) and...

  • INA138NA  Shunt Current Monitor IC TI _A0781
    Available
    INA138NA Shunt Current Monitor IC TI _A0781

    Features Current Monitor Detection method High-end Accuracy ± 0.5% Input voltage 2.7 V ~ 36 V Current - Output ʱ?? Operating temperature -40 ° C ~ 125 ° C Mounting Type Surface Mount Package / Case SC-74A, SOT-753 Supplier Device Package SOT-23-5

    Features Current Monitor Detection method High-end Accuracy ± 0.5% Input voltage 2.7 V...

    Features Current Monitor Detection method High-end Accuracy ± 0.5% Input voltage 2.7 V ~ 36 V Current - Output ʱ?? Operating temperature -40 ° C ~ 125 ° C Mounting Type Surface...

  • Voltage Regulator - 3.3V
    Available
    Voltage Regulator - 3.3V

    Description: This is the basic LD1117V33 voltage regulator, a low drop positive regulator with a 3.3V fixed output voltage. This fixed regulator provides a great amount of stability and protection for your project and with its on ship trimming this regulator is able to reach an output voltage tolerance within ±1%. Each one of these voltage regulators can... more detail given below

    Description: This is the basic LD1117V33 voltage regulator, a low drop positive...

    Description: This is the basic LD1117V33 voltage regulator, a low drop positive regulator with a 3.3V fixed output voltage. This fixed regulator provides a great amount of...

  • Adjustable Step Up Boost Voltage Converter _A0630
    Available
    Adjustable Step Up Boost Voltage Converter _A0630

    Model:  XL6009 Input voltage: 3.5V ~ 32VOutput voltage: 5V ~ 35VOutput current: rated current is 2.5A, maximum 3A (Additional heatsink is required)Load regulation: ±0.5%Voltage regulation: ±0.5%Work Temperature: -40°C ~ +125°CMaximum power: 10WSize: 4.1 x 2.1 x 1.3cm

    Model:  XL6009 Input voltage: 3.5V ~ 32VOutput voltage: 5V ~ 35VOutput current: rated...

    Model:  XL6009 Input voltage: 3.5V ~ 32VOutput voltage: 5V ~ 35VOutput current: rated current is 2.5A, maximum 3A (Additional heatsink is required)Load regulation: ±0.5%Voltage...

  • 50A Dual Channel Motor Drive Module _A0627
    Out of stock
    50A Dual Channel Motor Drive Module _A0627

    This motor driver works with single channel max 50A load capacity. This module performs far better than MC33886 or L298 motor driver, especially in terms of motor speed control and power efficiency....more detail given below

    This motor driver works with single channel max 50A load capacity. This module performs...

    This motor driver works with single channel max 50A load capacity. This module performs far better than MC33886 or L298 motor driver, especially in terms of motor speed control...

    ₨ 4,950
    Add to cart View
  • Breadboard Power Module 5V-3.3V_ A0407
    Available
    Breadboard Power Module 5V-3.3V_ A0407

    Breadboard power supply module, compatible with 5 V, 3.3 VApply to MB102 breadboardInput voltage: 6.5-12 V (DC) or USB power supplyOutput voltage: 3.3V/5V can switch overMaximum output current: <700 maFluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 VOn-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.

    Breadboard power supply module, compatible with 5 V, 3.3 VApply to MB102...

    Breadboard power supply module, compatible with 5 V, 3.3 VApply to MB102 breadboardInput voltage: 6.5-12 V (DC) or USB power supplyOutput voltage: 3.3V/5V can switch overMaximum...

  • 1-8S Lipo/Li-ion/Fe Battery Voltage Tester and Low Voltage Buzzer Alarm _A0385
    Available
    1-8S Lipo/Li-ion/Fe Battery Voltage Tester and Low Voltage Buzzer Alarm _A0385

    Features: Use for 1-8S Lipo/Li-ion/LiMn/Li-Fe Voltage detection precision: +_0.01V. Unit voltage display range: 0.5~4.5V Total voltage display range: 0.5~36V 1S test mode voltage range: 4-15V Low voltage alarm mode for 2-8S Alarm set value range:OFF~2.7~3.8V Specification: Size: 40mm x 25mm x 11mm Original box: NO Net weight: 9g Package weight: 15g Color: Red

    Features: Use for 1-8S Lipo/Li-ion/LiMn/Li-Fe Voltage detection precision: +_0.01V....

    Features: Use for 1-8S Lipo/Li-ion/LiMn/Li-Fe Voltage detection precision: +_0.01V. Unit voltage display range: 0.5~4.5V Total voltage display range: 0.5~36V 1S test mode...

  • TC7660 Charge Pump DC-to-DC Voltage Converter(Original)_A0353
    Available
    TC7660 Charge Pump DC-to-DC Voltage Converter(Original)_A0353

    The TC7660 is a pin-compatible replacement for theindustry standard 7660 charge pump voltageconverter. It converts a +1.5V to +10V input to acorresponding -1.5V to -10V output using only two lowcost capacitors, eliminating inductors and theirassociated cost, size and electromagnetic interference(EMI)... more detail given below

    The TC7660 is a pin-compatible replacement for theindustry standard 7660 charge pump...

    The TC7660 is a pin-compatible replacement for theindustry standard 7660 charge pump voltageconverter. It converts a +1.5V to +10V input to acorresponding -1.5V to -10V output...

  • KQ-130F Power line carrier module (Communication over Power Line)
    Available
    KQ-130F Power line carrier module (Communication over Power Line)_A0333

    Communication over Power Line. This module is designe to communicate between two device through Power line(e.g 220V power line) without any extra components. Working rate:120~135KHZInterface baud rate:9600bps, the true baud rate is 100bps,250-byte bufferTemperature:-25 degree~+70 degreeHumidity: 90%Power:DC +5V  Receiver:11mA  Transmitter:300mA 

    Communication over Power Line. This module is designe to communicate between two device...

    Communication over Power Line. This module is designe to communicate between two device through Power line(e.g 220V power line) without any extra components. Working...

  • 5A Current Sensor module ACS712-5A
    Available
    5A Current Sensor module ACS712-5A_A0330

    Color: BlueMaterial: PCB + metalACS712ELC-05B sensor chipsetPowered by 5V power supplyOn-board power indicatorMeasures -5~+5A current, corresponding simulation output 185mV/AOutput voltage is VCC/2 when on current was measuredACS712 is based on the principle of Hall detection, please avoid the magnetic field affect when using it

    Color: BlueMaterial: PCB + metalACS712ELC-05B sensor chipsetPowered by 5V power...

    Color: BlueMaterial: PCB + metalACS712ELC-05B sensor chipsetPowered by 5V power supplyOn-board power indicatorMeasures -5~+5A current, corresponding simulation output...

  • Voltage Sensor  (0-25V)
    Available
    Voltage Sensor (0-25V)_A0326

    Voltage input range: DC0-25VVoltage detection range: DC0.02445V-25VVoltage Analog Resolution: 0.00489VDC input connector: Terminal cathode connected to VCC, GND negative poleOutput interface: "+" then 5/3.3V, "-" then GND, "s" then the Arduino AD pins 

    Voltage input range: DC0-25VVoltage detection range: DC0.02445V-25VVoltage Analog...

    Voltage input range: DC0-25VVoltage detection range: DC0.02445V-25VVoltage Analog Resolution: 0.00489VDC input connector: Terminal cathode connected to VCC, GND negative...

  • 0.9v-5v Boost Step-up Power Supply Module(USB Connector)
    Out of stock
    0.9v-5v Boost Step-up Power Supply Module(USB Connector)_A0320

    Out current upto 600mAhEnter any DC voltage of 0.9V~5V and will output stable 5V DC with output current of 500~600MA. For example, the device could be powered by a single AA battery (current limitation would be from the battery)An example; connect 2x AA batteries in series to the appropriate +/- connectors and use a USB cable to power the target 5V device      

    Out current upto 600mAhEnter any DC voltage of 0.9V~5V and will output stable 5V DC...

    Out current upto 600mAhEnter any DC voltage of 0.9V~5V and will output stable 5V DC with output current of 500~600MA. For example, the device could be powered by a single AA...

    ₨ 200
    Add to cart View
  • 5V 100mA Polycrystalline PET Solar Cell _ A0309
    Available
    5V 100mA Polycrystalline PET Solar Cell _ A0309

    Rated Power: 0.5WOperating Voltage:5VOperating Current:100mAOpen Circuit Voltage:6VShort Circuit Current:106mADimension:50*100*3mmOperating Temperature:-20℃±85℃Light Intensity:1000W/M2,25℃,AM1.5Package Material:Anti-UV,resistance to yellowing,high transparent EVA epoxy resin adhesiveBase Material:Resistance to deformation, high strength PCB board

    Rated Power: 0.5WOperating Voltage:5VOperating Current:100mAOpen Circuit...

    Rated Power: 0.5WOperating Voltage:5VOperating Current:100mAOpen Circuit Voltage:6VShort Circuit Current:106mADimension:50*100*3mmOperating Temperature:-20℃±85℃Light...

  • TEC1-12706 12V 6A , 70WATT THERMOELECTRIC COOLER PELTIER REFRIGERATION
    Available
    TEC1-12706 12V 6A , 70WATT THERMOELECTRIC COOLER PELTIER REFRIGERATION_A0029

    TEC1-12706 12V 6A TEC Thermoelectric Cooler Peltier Refrigeration CPU Feature: Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler. 

    TEC1-12706 12V 6A TEC Thermoelectric Cooler Peltier Refrigeration CPU Feature: Get ice...

    TEC1-12706 12V 6A TEC Thermoelectric Cooler Peltier Refrigeration CPU Feature: Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous...

  • AC CURRENT TRANSFORMER (CURRENT SENSOR) MODULE 0-5A 3P/4P INTERFACE FOR ARDUINO
    Available
    5A AC CURRENT SENSOR MODULE 0-5A 3P/4P INTERFACE FOR ARDUINO_A0265

    Item Specifications: is_customized: YesPower: Medium PowerUsage: Limiter DiodeStructure: PNPSpecial Function: High Reverse Voltage Point Contact DiodeFrequency: High FrequencyType: Amplifier  

    Item Specifications: is_customized: YesPower: Medium PowerUsage: Limiter...

    Item Specifications: is_customized: YesPower: Medium PowerUsage: Limiter DiodeStructure: PNPSpecial Function: High Reverse Voltage Point Contact DiodeFrequency: High...

  • 3A MINI DC-DC STEP-DOWN POWER MODULE (0.8V-20V)
    Out of stock
    3A MINI DC-DC STEP-DOWN POWER MODULE (0.8V-20V)_A0246

    This is a mini DC-DC buck converter step-down power modulewith size of 22x17x4mm,capable of driving a load up to 3A with high efficiency, which can work with Iteaduino UNO, other mainboards and basic modules. It can also be used in DIY portable power, monitor power supply, buggy power, camera power supply etc.

    This is a mini DC-DC buck converter step-down power modulewith size of...

    This is a mini DC-DC buck converter step-down power modulewith size of 22x17x4mm,capable of driving a load up to 3A with high efficiency, which can work with Iteaduino UNO,...

    ₨ 100
    Add to cart View
  • 20A CURRENT SENSOR MODULE ACS712ELCTR-20A (+/- 20 AMP)
    Available
    20A CURRENT SENSOR MODULE ACS712ELCTR-20A (+/- 20 AMP)_A0180

    This current sensor gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems.

    This current sensor gives precise current measurement for both AC and DC signals. These...

    This current sensor gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems.

  • 30A CURRENT SENSOR MODULEACS712ELCTR-30A
    Available
    30A CURRENT SENSOR MODULE ACS712ELCTR-30A_A0096

    Specifications: 1. Current sensor chip: ACS712ELC-30A;2. Pin 5V power supply, on-board power indicator;3. The module can be measured plus or minus 30 amps, corresponding to the analog output 66mV / A;4. There is no detection current through, the output voltage is VCC / 2;5. PCB board size: 31 (mm) x13 (mm);Note: ACS712 Hall detection principle, when you use to avoid magnetic field impact this!

    Specifications: 1. Current sensor chip: ACS712ELC-30A;2. Pin 5V power supply, on-board...

    Specifications: 1. Current sensor chip: ACS712ELC-30A;2. Pin 5V power supply, on-board power indicator;3. The module can be measured plus or minus 30 amps, corresponding to the...

  • LM2596 DC-DC 4.5-40V ADJUSTABLE STEP-DOWN POWER SUPPLY MODULE
    Available
    LM2596 DC-DC 4.5-40V ADJUSTABLE STEP-DOWN POWER SUPPLY MODULE_A0062

    This is high performance DC to DC Step Down Adjustable Power Supply Module. Based on LM2596 Switching Regulator Specification:Input voltage: 3.2-40V (Input voltage must be higher than output voltage 1.5V above) Output voltage: 1.5-35V (Adjustable) Output current:Rated current is 2A,maximum 3A(Additional heatsink is required) If the output power greater than 15W, the proposed combined heat sink

    This is high performance DC to DC Step Down Adjustable Power Supply Module. Based on...

    This is high performance DC to DC Step Down Adjustable Power Supply Module. Based on LM2596 Switching Regulator Specification:Input voltage: 3.2-40V (Input voltage must be...

  • DIGITAL VOLTMETER HEAD (GREEN COLOR)_A0054
    Available
    Digital Voltmeter Module _A0054

    Working voltage : 3.3 ~ 30V ( with reverse polarity protection )Test voltage : 0 ~ 99.9VOperating Current : <20mADisplay : 0.36 "LED, red  Dimensions: Length Width 23x 15x 10mm thickHole size : 24x15mmHole screw hole size : 2mmMeasurement rate :  ≥500mS / timesAccuracy : 1% (1 word )Extreme working conditions :Minimum operating voltage : +3.3 VMaximum working voltage : +30 V

    Working voltage : 3.3 ~ 30V ( with reverse polarity protection )Test voltage : 0 ~...

    Working voltage : 3.3 ~ 30V ( with reverse polarity protection )Test voltage : 0 ~ 99.9VOperating Current : <20mADisplay : 0.36 "LED, red  Dimensions: Length Width 23x 15x...

  • 5V-3V FOUR CHANNEL LEVEL CONVERTER MODULE(FOR UART/IIC/1-WIRE/SPI)
    Available
    5V-3V FOUR CHANNEL LEVEL CONVERTER MODULE(FOR UART/IIC/1-WIRE/SPI)_A0125

    Features: Four MOS tube : four channel , two-way conversation 3V and 5V The power input with anti-reverse protection, integrated 3.3VLDO,and provide current less than 150mA With power indicate Used for UART/IIC/1-WIRE/SPI 

    Features: Four MOS tube : four channel , two-way conversation 3V and 5V The power input...

    Features: Four MOS tube : four channel , two-way conversation 3V and 5V The power input with anti-reverse protection, integrated 3.3VLDO,and provide current less than 150mA With...