Categories

Specials

All specials

Best sellers

All best sellers

Arduino Compatible Products There are 127 products.

Arduino Compatible Products

List of Arduino compatible products given below.

  • New!
    1.3" Inch Blue I2C IIC Serial 128X64 OLED LCD Display Module
    Available
    1.3" Inch Blue I2C IIC Serial 128X64 OLED LCD Display Module _A1316

    Size: 1.3Resolution: 128X64Color: BlueViewing angle: greater than 160 degreesSupported platforms: for  arduino, 51 series, MSP430 series, STIM32 / 2, SCR chipsLow power consumption: 0.04W during normal operationSupport wide voltage: 3.3V-5V DCWorking temperature: -30-80 degrees... MORE DETAIL GIVEN Below

    Size: 1.3Resolution: 128X64Color: BlueViewing angle: greater than 160 degreesSupported...

    Size: 1.3Resolution: 128X64Color: BlueViewing angle: greater than 160 degreesSupported platforms: for  arduino, 51 series, MSP430 series, STIM32 / 2, SCR chipsLow power...

  • Out of stock
    Seven Segment Digital Clock Display TM1637 I2C for Arduino etc. _A1170

    The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube.Display common anode for the four red LEDDigital tube 8 gray adjustableLevel control interface for 5V or 3.3VHow to Use it: http://www.instructables.com/id/4-Digit-Two-Wire-Display/

    The module is a 12 foot with a clock point four common anode tube (0.36 in.) display...

    The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver IC TM1637, only two signal lines can make the MCU control 4 8 digital...

    ₨ 190
    Add to cart View
  • Active Single Phase Voltage Transformer Module AC Output Voltage Sensor for Arduino Mega
    Out of stock
    Wide Range AC Voltage Sensor Module _A1169

    Sensor : ZMPT101BOnboard precision miniature voltage transformerOnboard high-precision op amp circuits for signal sampling and adequate compensation to make precise functionsModules can be measured within the 250V AC voltage, the corresponding analog output can be adjustedPCB board size: 49.5 (mm) x19.4 (mm)Datasheet: http://www.zeming-e.com/file/0_2013_10_18_093344.pdf

    Sensor : ZMPT101BOnboard precision miniature voltage transformerOnboard high-precision...

    Sensor : ZMPT101BOnboard precision miniature voltage transformerOnboard high-precision op amp circuits for signal sampling and adequate compensation to make precise...

    ₨ 750
    Add to cart View
  • 9V Battery Holder Box Case Wire with Plug 5.5*2.1mm for Arduino
    Available
    9V Battery Holder Box Case With DC Power Plug 5.5*2.1mm _A1160

    Plug size:5.5*2.1mmCable length: 20cm

    Plug size:5.5*2.1mmCable length: 20cm

    Plug size:5.5*2.1mmCable length: 20cm

  • MAX9812 Based Microphone Sound Amplifier Module _A0898
    Out of stock
    MAX9812 Based Microphone Sound Amplifier Module _A0898

    Description: Professional Microphone amplification IC, low output noise, small size, high sensitivity, fixed gain 20dB, support 3.3v and 5v two power supply. Voltage: 3-5VOUT Output: The default output analog signals.Size: 15mm * 9mm

    Description: Professional Microphone amplification IC, low output noise, small size,...

    Description: Professional Microphone amplification IC, low output noise, small size, high sensitivity, fixed gain 20dB, support 3.3v and 5v two power supply. Voltage: 3-5VOUT...

    ₨ 250
    Add to cart View
  • DC Power Socket Connector Male with Wire_A0893
    Available
    DC Power Socket Connector Male with Wire_A0893

    Description: Outer diameter of 5.5mm internal diameter of 2.1mm. Line length 30 cm 14 each copper wire (copper) has a diameter of 0.14mm. 0.43 square Red positive, black negative

    Description: Outer diameter of 5.5mm internal diameter of 2.1mm. Line length 30 cm 14...

    Description: Outer diameter of 5.5mm internal diameter of 2.1mm. Line length 30 cm 14 each copper wire (copper) has a diameter of 0.14mm. 0.43 square Red positive, black negative

  • EEPROM I2C base AT24C256  Memory Module _A0858
    Out of stock
    EEPROM I2C base AT24C256 Memory Module _A0858

    1- 8P onboard chip holder, install AT24C256 chip; 2 -pin power supply, on-board power indicator;3 -onboard I2C communications required pull-up resistor;4 -All pins are drawn and marked, and the address input pins can directly write protection jumper settings;5-PCB board Dimensions: 36.5 (mm) x12 (mm)

    1- 8P onboard chip holder, install AT24C256 chip; 2 -pin power supply, on-board power...

    1- 8P onboard chip holder, install AT24C256 chip; 2 -pin power supply, on-board power indicator;3 -onboard I2C communications required pull-up resistor;4 -All pins are drawn and...

    ₨ 240
    Add to cart View
  • Available
    LPG Iso-butane, Propane Gas Sensor _A0930

    Description: This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistanc detail given below

    Description: This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for...

    Description: This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6...

  • NodeMCU Devkit 2.0 Kit _A0998
    Out of stock
    NodeMCU Devkit 2.0 Kit _A0998

    Description:NodeMCU is an open source IoT platform.It uses the Lua scripting language. It is based on the eLua project, and built on the ESP8266 SDK 0.9.5. It uses many open source projects, such as lua-cjson,and spiffs. It includes firmware which runs on the ESP8266 Wi-Fi SoC, and hardwarewhich is based on the ESP-12 module.... more detail given 

    Description:NodeMCU is an open source IoT platform.It uses the Lua scripting language....

    Description:NodeMCU is an open source IoT platform.It uses the Lua scripting language. It is based on the eLua project, and built on the ESP8266 SDK 0.9.5. It uses many open...

    ₨ 1,300
    Add to cart View
  • Nextion 5 inch Serial HMI TFT Touch Panel LCD _A0996
    Available
    Nextion 7" inch Serial HMI TFT Touch Panel LCD Display _A0997

    Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less...detail below

    Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control...

    Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or...

    ₨ 16,000
    Add to cart View
  • Nextion 5 inch Serial HMI TFT Touch Panel LCD _A0996
    Available
    Nextion 5 inch Serial HMI TFT Touch Panel LCD _A0996

    Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less...detail below

    Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control...

    Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or...

    ₨ 12,500
    Add to cart View
  • 16 Channel 12-bit PWM SERVO DRIVER _A0899
    Available
    16 Channel 12-bit PWM SERVO DRIVER _A0899

    If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, the limited PWM outputs of your microcontroller would be a big problem for you. To overcome this problem, the only thing you should do is to get an Adafruit 16-Channel 12-Bit PWM/Servo Driver...detail below

    If you want to make a robot which has lots of moving parts or if you want to control...

    If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, the limited PWM outputs of your microcontroller would be a...

  • Out of stock
    30A Single H-Bridge VNH2SP30-Monster Driver Module _A0892

    This is essentially a ramped up version of Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so thi... detail given below 

    This is essentially a ramped up version of Ardumoto motor driver shield. For this...

    This is essentially a ramped up version of Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor...

    ₨ 800
    Add to cart View
  • 30A 250V Relay Module High-side Driver (SLA-05VDC-SL-A) TTL 5V input  _A0867
    Available
    30A 250V Relay Module High-side Driver (SLA-05VDC-SL-A) TTL 5V input _A0867

    Relay Type: SLA-05VDC-SL-ACoil operation voltage: DC 5VContact Voltage: 240VAC/30VDC 30ATotal Size: 47 x 37 x 24mm/1.9" x 1.5" x 0.94"(L*W*T) Mounting Hole Dia: 4mm/ 0.16";Material : PCB, Iron, Plastic

    Relay Type: SLA-05VDC-SL-ACoil operation voltage: DC 5VContact Voltage: 240VAC/30VDC...

    Relay Type: SLA-05VDC-SL-ACoil operation voltage: DC 5VContact Voltage: 240VAC/30VDC 30ATotal Size: 47 x 37 x 24mm/1.9" x 1.5" x 0.94"(L*W*T) Mounting Hole Dia: 4mm/...

  • USB to Micro USB  Cable 1m  (Highest Quality) for Due,Raspberry, Mobiles etc _A0839
    Available
    USB to Micro USB Cable 1m (Highest Quality) for Due,Raspberry, Mobiles etc _A0839

    The best USB cable is the one you have with you. This 3-foot (about one meter) cable is compact and easy to carry or stash where you need it. This cable's got a micro-USB connector at one end, for tablets, e-readers, smartphones and a host of devices too numerous to count; and a Type A standard USB...detail below

    The best USB cable is the one you have with you. This 3-foot (about one meter) cable is...

    The best USB cable is the one you have with you. This 3-foot (about one meter) cable is compact and easy to carry or stash where you need it. This cable's got a micro-USB...

  • 16x8 LED Dot Matrix with MAX7219 Driver _A0821
    Available
    8x8 LED Dot Matrix with MAX7219 Driver _A0821

    Description:Module operating voltage: 5VA single module can drive an 8 * 8 common cathode latticeWith four screws hole, aperture 3mm, by using our M3 Tongzhu fixed.Module with input and output interfaces, supports multiple modules cascade...detail given below

    Description:Module operating voltage: 5VA single module can drive an 8 * 8 common...

    Description:Module operating voltage: 5VA single module can drive an 8 * 8 common cathode latticeWith four screws hole, aperture 3mm, by using our M3 Tongzhu fixed.Module with...

  • Digispark - The tiny, Arduino enabled, usb dev board! Attiny85 _
    Out of stock
    Digispark - The tiny, Arduino enabled, usb dev board! Attiny85 _A0891

    The micro-sized, Arduino enabled, usb development board - cheap enough to leave in any project! Digispark is an ATtiny85 based microcontroller development board come with USB interface. Coding is similar to Arduino, and it use the familiar Arduino IDE for development...detail given below

    The micro-sized, Arduino enabled, usb development board - cheap enough to leave in any...

    The micro-sized, Arduino enabled, usb development board - cheap enough to leave in any project! Digispark is an ATtiny85 based microcontroller development board come with USB...

    ₨ 600
    Add to cart View
  • Pulse Sensor (Heart-rate Beats Per Minute)  _A0813
    Out of stock
    Pulse Sensor (Heart-rate Beats Per Minute) _A0813

     Heart rate data can be really useful whether you’re designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart beat. The problem is that heart rate can be difficult to measure. Luckily, the Pulse Sensor Amped can solve that problem!...detail given below

     Heart rate data can be really useful whether you’re designing an exercise routine,...

     Heart rate data can be really useful whether you’re designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart...

    ₨ 650
    Add to cart View
  • MLX90615 Digital Infrared Temperature Sensor GY-90615  _ A0814
    Available
    MLX90615 Digital Infrared Temperature Sensor GY-90615 _ A0814

    Features:Wide Temperature Detecting Range   -40 to 85°C for sensor temperature   -40 to 115°C for object temperatureHigh accuracy of 1°C over wide temperatureMeasurement resolution of 0.02°CEmbedded emissivity compensationPower saving modePower supply:3v-5vSize:10.5*13*9.6 mmCurrent:1ma ...  Documents: https://www.adrive.com/public/XBdCUR/FZ1688-GY90615.rar

    Features:Wide Temperature Detecting Range   -40 to 85°C for sensor temperature   -40 to...

    Features:Wide Temperature Detecting Range   -40 to 85°C for sensor temperature   -40 to 115°C for object temperatureHigh accuracy of 1°C over wide temperatureMeasurement...

  • Dccduino (Arduino Compatible) UNO with usb cable _A0806
    Available
    Dccduino (Arduino Compatible) UNO with usb cable _A0806

    The DCcduino Uno is a micro-controller board based on the ATmega328 and USB CH340 Serial Converter.These Chinese Uno R3 CH340 board differs from Italian Arduino UNO R3 boards in that it does not use the expensive FTDI USB-to-serial driver chip. Instead, it features the CH340 USB-to-serial converter chip which makes it low cost and 100% Arduino UNO R3 compatible board.... detail below

    The DCcduino Uno is a micro-controller board based on the ATmega328 and USB CH340...

    The DCcduino Uno is a micro-controller board based on the ATmega328 and USB CH340 Serial Converter.These Chinese Uno R3 CH340 board differs from Italian Arduino UNO R3 boards in...

  • 2004 Basic 20x4 Character LCD Display (Blue Back-light ) _A0820
    Out of stock
    2004 Basic 20x4 Character LCD Display (Blue Back-light ) _A0820

    This is a 20 character by 4 line display that runs at 5.0V.Includes Blue LED backlight. Utilizes the common SPLC780D(Superior to KS0066U)parallel interface (datasheet).Interface code is widely available for many different controllers and systems. If you used Arduinos board, just load the Example from Arduinos LiquidCrystal Library...more detail below

    This is a 20 character by 4 line display that runs at 5.0V.Includes Blue LED backlight....

    This is a 20 character by 4 line display that runs at 5.0V.Includes Blue LED backlight. Utilizes the common SPLC780D(Superior to KS0066U)parallel interface (datasheet).Interface...

    ₨ 550
    Add to cart View
  • ITDB02-1.8SP 1.8" Arduino TFT LCD Display Module Shield Kit For Starter _A0811
    Available
    ITDB02-1.8SP 1.8" Arduino TFT LCD Display Module Shield Kit For Starter _A0811

    ITBD02-1.8SP is a 1.8" TFT LCD module with 262K colors 128 x 160 resolutions. The display interface is serial, so it just needs 5 wires (CS,RS,SCL,SDA,RST) for controlling. The controller of this LCD module is ST7735. ITDB02-1.8SP is supported by UTFT Library.http://www.rinkydinkelectronics.com/library.php?id=51 ... more detail given below

    ITBD02-1.8SP is a 1.8" TFT LCD module with 262K colors 128 x 160 resolutions. The...

    ITBD02-1.8SP is a 1.8" TFT LCD module with 262K colors 128 x 160 resolutions. The display interface is serial, so it just needs 5 wires (CS,RS,SCL,SDA,RST) for controlling. The...

  • Text To Speech Module _A0888
    Available
    Text To Speech Module _A0888

    For Complete Artical how to use this module please visit http://www.toughdev.com/viewpost.php?id=2614473177299027939&t=0&s=1 Support the synthetic English letters  on-board embedded SYN6288 Chinese speech synthesis chip, SYN6288 is a cost-effective, high-end speech synthesis chips in a more natural effect, through...more detail given below

    For Complete Artical how to use this module please visit...

    For Complete Artical how to use this module please visit http://www.toughdev.com/viewpost.php?id=2614473177299027939&t=0&s=1 Support the synthetic English letters...

  • WiFi Serial Transceiver Module w/ ESP8266 - 1MB Flash (V.01)
    Available
    WiFi Serial Transceiver Module w/ ESP8266 - 1MB Flash (V.01) _A0816

    ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor...more detail given below

    ESP8266 is a highly integrated chip designed for the needs of a new connected world. It...

    ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either...

  • 2.2 Inch Serial TFT SPI LCD Screen Module HD 240 x 320 5110 Compatible _A0769
    Out of stock
    2.2 Inch Serial TFT SPI LCD Screen Module HD 240 x 320 5110 Compatible _A0769

    Driver IC: ILI9340CDisplay size: 2.2 inchOn-board SD cardWith regulator IC support 5V / 3.3VResolution: 240 x 320(RGB)Interface: 4-Wire SPI(supports hardware SPI)Color depth: 262K / 65KActive area: 33.84 x 45.12mmSize: 40.10 x 55.20 x 2.35mm(W x H x D)

    Driver IC: ILI9340CDisplay size: 2.2 inchOn-board SD cardWith regulator IC support 5V /...

    Driver IC: ILI9340CDisplay size: 2.2 inchOn-board SD cardWith regulator IC support 5V / 3.3VResolution: 240 x 320(RGB)Interface: 4-Wire SPI(supports hardware SPI)Color depth:...

    ₨ 800
    Add to cart View
  • USB to TTL  UART CP2102 Module with DTR pin _A0667
    Available
    USB to TTL UART CP2102 Module with DTR pin _A0667

    This is a redesigned CP2102 module, fully compatible with arduino pro mini, why? because all the pins are same as our FTDI basic board, and most important is the DTR pin enabled as FTDI, so you can directly upload sketch with this one. So what is the advantage? The price is almost only one third of the FTDI basic. Meanwhile, all the pins of CP2102 are brought...more detail given below

    This is a redesigned CP2102 module, fully compatible with arduino pro mini, why?...

    This is a redesigned CP2102 module, fully compatible with arduino pro mini, why? because all the pins are same as our FTDI basic board, and most important is the DTR pin enabled...

  • Programmable IR Receiver - SIS-2
    Available
    Programmable IR Receiver - SIS-2

    The SIS-2 monitors an IR receiver, and when a certain remote code is detected, an output pin will toggle. Two outputs are available and any code on any remote can be taught to the SIS-2. This makes it simple to implement an infrared (IR) remote controllable switching solution for a wide variety of applications. When used with an inexpensive IR receiver....more detail given below

    The SIS-2 monitors an IR receiver, and when a certain remote code is detected, an...

    The SIS-2 monitors an IR receiver, and when a certain remote code is detected, an output pin will toggle. Two outputs are available and any code on any remote can be taught to...

  • I2C EEPROM - 256kbit
    Available
    I2C EEPROM - 256kbit

    Description: 2 Wire Serial Communication (I2C) EEPROM - The back bone of any microprocessor project. These 8 pin chips need only two wires to communicate and retain their data even with power failure. Use the 256K EEPROM for some serious data storage! ...more detail given below

    Description: 2 Wire Serial Communication (I2C) EEPROM - The back bone of any...

    Description: 2 Wire Serial Communication (I2C) EEPROM - The back bone of any microprocessor project. These 8 pin chips need only two wires to communicate and retain their data...

  • SparkFun I2C/SPI-to-UART Breakout - SC16IS750
    Available
    SparkFun I2C/SPI-to-UART Breakout - SC16IS750

    Description: This is a breakout board for the SC16IS750, a handy chip used to convert I2C or SPI serial signals to a single-channel, high-performance UART. As an application example: we use this chip on ourWiFly Shield to allow an Arduino to communicate with the WiFly RN-131G module - which is normally controlled via a UART - using an SPI interface. This allows....more detial given below

    Description: This is a breakout board for the SC16IS750, a handy chip used to convert...

    Description: This is a breakout board for the SC16IS750, a handy chip used to convert I2C or SPI serial signals to a single-channel, high-performance UART. As an application...

  • Available
    Digital Potentiometer - 10K (Digital Variable Resistor IC )

    Potentiometers are incredibly useful, whether you’re controlling the volume on your stereo or the ‘mood lighting’ in your room. The problem with traditional potentiometers is the fact that your microcontroller doesn’t have an easy way to interface with them. Digital Potentiometers solve that problem by allowing you to control a voltage splitter with digital signals....more detail given below

    Potentiometers are incredibly useful, whether you’re controlling the volume on your...

    Potentiometers are incredibly useful, whether you’re controlling the volume on your stereo or the ‘mood lighting’ in your room. The problem with traditional potentiometers is...

  • FLiR Dev Kit (FliR Thermal Imaging Camera )
    Available
    FLiR Dev Kit (FLiR Thermal Imaging Camera )

    Description: The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to be able to bring FLiR’s thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. All you need to do to get this kit set up, ... more detail given below

    Description: The FLiR Dev Kit includes a breakout as well as a Lepton® longwave...

    Description: The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to be able to bring FLiR’s thermal imaging...

    ₨ 67,000
    Add to cart View
  • Flexiforce Pressure Sensor - 100lbs.
    Available
    Flexiforce Pressure Sensor - 100lbs.

    Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end ...more detail given below

    Description: This is a piezoresistive force sensor from Tekscan. The harder you press,...

    Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to...

  • SparkFun Parallel DAC Breakout - AD5330 (8-Bit)
    Available
    SparkFun Parallel DAC Breakout - AD5330 (8-Bit)

    Description: This is a simple breakout board for Analog Device’s AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface, and can operate from a 2.5 to 5.5V supply consuming just 115uA (at 3V). The DB0-7 pins, the parallel data inputs, are used to configure the analog output voltage. CS selects the device, and data is loaded into...more detail given below

    Description: This is a simple breakout board for Analog Device’s AD5330 8-bit...

    Description: This is a simple breakout board for Analog Device’s AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface, and can operate from a 2.5...

  • SparkFun UV Sensor Breakout - ML8511
    Available
    SparkFun UV Sensor Breakout - ML8511

    Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of UV light that’s detected. This breakout can be very handy in creating devices that warn the user of sunburn or detect the UV index as it relates to weather conditions...more detail given below

    Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511...

    Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of...

  • SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2
    Available
    SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2

    Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it’s easy to interface with most controllers. Pressure output can ...more detail given below

    Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a...

    Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled)....

  • FTDI Cable 5V VCC-3.3V I/O
    Available
    FTDI Cable 5V VCC-3.3V I/O _A1153

    Description: The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The VCC pins of this FTDI cable are configured to operate at 5V with 3.3V I/O. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated with a 0.1" pitch, 6-pin.. .more detail given below

    Description: The FTDI cable is a USB to Serial (TTL level) converter which allows for a...

    Description: The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The VCC pins of this FTDI cable are...

  • On sale!
    FTDI Cable 5V
    Out of stock
    FTDI Cable 5V

    Description: The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated with a 0.1" pitch, 6-pin connector....more detail given below

    Description: The FTDI cable is a USB to Serial (TTL level) converter which allows for a...

    Description: The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are...

    Reduced price! ₨ 1,900
    Add to cart View
  • SparkFun Danger Shield
    Available
    SparkFun Danger Shield

    Description: The SparkFun Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs. The Danger Shield has so much potential; we can’t wait to see what you’re able to do with it! The shield’s features include...more detail given below

    Description: The SparkFun Danger Shield mounts on top of your Arduino or Arduino Pro...

    Description: The SparkFun Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs. The Danger Shield has so...

  • SparkFun 5-Way Tactile Switch Breakout
    Available
    SparkFun 5-Way Tactile Switch Breakout

    Description: Sometimes you need a very small directional input device (world’s smallest game controller, anyone?) This 5-way tactile switch (up, down, left, right, and center click) allows for joystick-like control in a very small package. This breadboard-friendly board breaks out all the switch signals, and includes pullup resistors configured so that the  ...more detail given below

    Description: Sometimes you need a very small directional input device (world’s smallest...

    Description: Sometimes you need a very small directional input device (world’s smallest game controller, anyone?) This 5-way tactile switch (up, down, left, right, and center...

  • CAN-BUS Arduino Shield _A0631
    Out of stock
    CAN-BUS Arduino Shield _A0631

    Description: This shield gives the Arduino CAN-Bus capability. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBD-II cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM406 GPS module....more detail given below

    Description: This shield gives the Arduino CAN-Bus capability. It uses the Microchip...

    Description: This shield gives the Arduino CAN-Bus capability. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connection is via a standard 9-way...

    ₨ 3,500
    Add to cart View
  • On sale!
    MAX6675 K-type Thermocouple Temperature Sensor module _A0629
    Available
    MAX6675 K-type Thermocouple Temperature Sensor module _A0629

    Description: MAXIM IC MAX6675 Cold Junction Compensated K-Type Thermocouple to Digital Converter. This simple 8-pin SOIC IC attaches directly to any K-Type Thermocouple and interfaces via a SPI read-only interface. Works great with 8-pin SOIC to DIP adapters. 0.25C Resolution 0C to +1024C Minimal 2-wire digital interface  ...detail give below

    Description: MAXIM IC MAX6675 Cold Junction Compensated K-Type Thermocouple to Digital...

    Description: MAXIM IC MAX6675 Cold Junction Compensated K-Type Thermocouple to Digital Converter. This simple 8-pin SOIC IC attaches directly to any K-Type Thermocouple and...

    Reduced price! ₨ 750
    Add to cart View
  • 2.4G nRF24L01 Wireless Module w / PA and LNA _A0021
    Out of stock
    2.4G nRF24L01 Wireless Module w / PA and LNA _A0021

    • Voltage: 3 - 3.6V• Uses the 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+• Operates in the 2.4GHz band and has many new features• Features a reverse polarized SMA connector for maximum RF range  ...more detail given below Note: Will be ship After a buyer has successfully authenticated.

    • Voltage: 3 - 3.6V• Uses the 2.4GHz transceiver from Nordic Semiconductor, the...

    • Voltage: 3 - 3.6V• Uses the 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+• Operates in the 2.4GHz band and has many new features• Features a reverse polarized...

    ₨ 650
    Add to cart View
  • 50A Dual Channel Motor Drive Module _A0627
    Out of stock
    50A Dual Channel Motor Drive Module _A0627

    This motor driver works with single channel max 50A load capacity. This module performs far better than MC33886 or L298 motor driver, especially in terms of motor speed control and power efficiency....more detail given below

    This motor driver works with single channel max 50A load capacity. This module performs...

    This motor driver works with single channel max 50A load capacity. This module performs far better than MC33886 or L298 motor driver, especially in terms of motor speed control...

    ₨ 4,950
    Add to cart View
  • Flex Sensor 2.2"
    Out of stock
    Flex Sensor 2.2"

    The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the ...more detail  given below

    The resistance of the flex sensor changes when the metal pads are on the outside of the...

    The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). A simple flex sensor 2.2" in length. As the sensor is...

    ₨ 1,100
    Add to cart View
  • Mindwave Sesnor Device NeuroSky Mindwave Mobile
    Out of stock
    Brain Wave Sesnor Device NeuroSky Mindwave Mobile

    Description: This is the Mindwave Mobile from NeuroSky, an EEGheadset that safely measures and transfers the power spectrum (alpha waves, beta waves, etc) data via Bluetooth to wirelessly communicate with your computer, iOS, or Android device. This headset can be simply slipped on to be able to see your brainwaves change in real time. With the Mindwave Mobile....more detail given below

    Description: This is the Mindwave Mobile from NeuroSky, an EEGheadset that safely...

    Description: This is the Mindwave Mobile from NeuroSky, an EEGheadset that safely measures and transfers the power spectrum (alpha waves, beta waves, etc) data via Bluetooth to...

    ₨ 22,500
    Add to cart View
  • Text-to-Speech Module - Emic 2
    Available
    Text-to-Speech Module - Emic 2

    Description: Ever wish your project could just speak up and tell you what’s going on? Why not give it a voice? The Emic-2 Text-to-Speech module makes it really easy to give voice to your embedded projects. The Emic-2 was designed by Parallax in conjunction with Grand Idea Studio to make voice synthesis a total no-brainer. Simply connect the Emic-2 to a 5VDC power....more detail given below

    Description: Ever wish your project could just speak up and tell you what’s going on?...

    Description: Ever wish your project could just speak up and tell you what’s going on? Why not give it a voice? The Emic-2 Text-to-Speech module makes it really easy to give...

    Reduced price! ₨ 10,200
    Add to cart View
  • Available
    VK16E Serial GMOUSE GPS Module _A0565

    High integrated, small size GPS module with built-in antenna, NMEA output, TTL level serial interface, connect to any MPU easily. high sensitivity is achieved by utilizing SiRF III chip.PPS LED is light after power on, became flash after located...more detail given below

    High integrated, small size GPS module with built-in antenna, NMEA output, TTL level...

    High integrated, small size GPS module with built-in antenna, NMEA output, TTL level serial interface, connect to any MPU easily. high sensitivity is achieved by utilizing SiRF...

  • On sale!
    Available
    6 DOF Manipulator Aluminum Robot Arm with Claw and Base _A0563

    The robot can be rotated three-dimensional objects in  front crawl , robots elongation distance is long, the bottom of the  platform through a fixed platform with lots of M3 mounting holes , can  be easily installed in a fixed place , saving a ...more detail given below Note: Servo Not Included in the package

    The robot can be rotated three-dimensional objects in  front crawl , robots elongation...

    The robot can be rotated three-dimensional objects in  front crawl , robots elongation distance is long, the bottom of the  platform through a fixed platform with lots of M3...

    Reduced price! ₨ 8,500
    Add to cart View
  • Pressure sensor MD-PS002 (700KPa) pressure / tire pressure sensors  _A0562
    Available
    Pressure sensor MD-PS002 (700KPa) pressure / tire pressure sensors _A0562

    datasheet: http://www.shmind.com/upload/201202/201202101011084076.pdf detail given below

    datasheet: http://www.shmind.com/upload/201202/201202101011084076.pdf detail given below

    datasheet: http://www.shmind.com/upload/201202/201202101011084076.pdf detail given below

  • AD9833 DDS Signal Generator Module _A0561
    Available
    AD9833 DDS Signal Generator Module _A0561

    1.high quality. 2.The AD9833 is a low power programmable waveform generator capable of producing sine, triangular, and square wave outputs. 3.Waveform generation is required in various types of sensing, actuation, and time domain reflectometry applications....more detail given below Arduino Code Given Below

    1.high quality. 2.The AD9833 is a low power programmable waveform generator capable of...

    1.high quality. 2.The AD9833 is a low power programmable waveform generator capable of producing sine, triangular, and square wave outputs. 3.Waveform generation is required in...

  • TEA5767 Digital FM Radio Module (Arduino Compatible) _A0558
    Available
    TEA5767 Digital FM Radio Module (Arduino Compatible) _A0558

    This is a very small single chip FM radio receiver module found in many portable media players. Based on the AR1010 IC from Airoha, the FM receiver uses a simple command set over an I2C or SPI interface. Crystal and supporting components are all on board, all you need to attach is an antenna!...more detail given below

    This is a very small single chip FM radio receiver module found in many portable media...

    This is a very small single chip FM radio receiver module found in many portable media players. Based on the AR1010 IC from Airoha, the FM receiver uses a simple command set...

  • Available
    Dual Speed Encoder Module for speed detection _A0557

    Widely used in motor speed detection, pulse-counting, any position, possesses 2 road testing. Module unique : Trough-like optocoupler use sensor tank width 5mm . Comparator output , signal clean , waveform good , riving capacity strong , more than 15ma. Working voltage 3.3v-5v..... more detail given below  

    Widely used in motor speed detection, pulse-counting, any position, possesses 2 road...

    Widely used in motor speed detection, pulse-counting, any position, possesses 2 road testing. Module unique : Trough-like optocoupler use sensor tank width 5mm . Comparator...

  • 2.4 Ghz CC2500 Serial RF Transreceive _A0556
    Available
    2.4 Ghz CC2500 Serial RF Transreceive _A0556

    This is an FSK Transceiver module, which is designed using the Chipcon IC(CC2500). It is a true single-chip transceiver, It is based on 3 wire digital serial interface and an entire Phase-Locked Loop (PLL) for precise local oscillator generation .so the frequency could be setting......more detail given below Note: Will be ship After a buyer has successfully authenticated.

    This is an FSK Transceiver module, which is designed using the Chipcon IC(CC2500). It...

    This is an FSK Transceiver module, which is designed using the Chipcon IC(CC2500). It is a true single-chip transceiver, It is based on 3 wire digital serial interface and an...

  • Smoke Sensor Module With Relay Output _A0553
    Available
    Smoke Sensor Module With Relay Output _A0553

    Voltage: DC 9VStandby Current: 10μAInduced Current: <30mARelay Output: Normally open / closed; high / low level outputSensitivity: AdjustableWorking Temperature: -5 deg C - +50 deg CModel: DYP-ME0010Size (L x W x H): Approx. 2.7 x 2 x 0.7 inch / 7 x 5 x 1.8 cm

    Voltage: DC 9VStandby Current: 10μAInduced Current: <30mARelay Output: Normally open...

    Voltage: DC 9VStandby Current: 10μAInduced Current: <30mARelay Output: Normally open / closed; high / low level outputSensitivity: AdjustableWorking Temperature: -5 deg C -...

  • 1-Channel Solid State Relay Module _A0544
    Available
    1-Channel Solid State Relay Module _A0544

    Compares with the traditional mechanical relay, the Solid State Relay (SSR) has many advantages: it has a longer life, with a much higher turn on/off speed and no noise. Besides, it also has better resistance to vibration and mechanical shock, and better moisture proof performance. .... more detail given below

    Compares with the traditional mechanical relay, the Solid State Relay (SSR) has many...

    Compares with the traditional mechanical relay, the Solid State Relay (SSR) has many advantages: it has a longer life, with a much higher turn on/off speed and no noise....

  • Available
    DSM501A DUST SENSOR _A0543

    Overview The dust sensor module DSM501A is low cost,compact size for a particle density sensor.  Quantitative particle measurement with the principle of particle counter. FIne particle of which diameters are bigger than one micron could be detected with high sensitivity. Inside heater realizes the self-air taking. One control contact and two output contacts... more detail given below

    Overview The dust sensor module DSM501A is low cost,compact size for a particle density...

    Overview The dust sensor module DSM501A is low cost,compact size for a particle density sensor.  Quantitative particle measurement with the principle of particle counter. FIne...

  • IIC I2C Serial Interface Module for 16x2/20x4 LCD _A0541
    Available
    IIC I2C Serial Interface Module for 16x2/20x4 LCD _A0541

    If you have a problem with the wiring, multi-line LCD display makes confusing or inadequate leg Arduino I2C LCD module, this is the recommended option. It can be connected to the LCD monitor 16x2 or 20x4 using wires only two lines to help ease leg rest Arduino to use the E key, easy to use with standard library available.

    If you have a problem with the wiring, multi-line LCD display makes confusing or...

    If you have a problem with the wiring, multi-line LCD display makes confusing or inadequate leg Arduino I2C LCD module, this is the recommended option. It can be connected to...

  • 0.96 Inch 128x64 Oled Yellow and Blue I2C/Serial LCD Display _A0530
    Available
    0.96 Inch 128x64 Oled Yellow and Blue I2C/Serial LCD Display _A0540

    Probably one of the brightest, most versatile and inexpensive OLED currently on the market - great with Arduino or the WCT Pro Mini+. It's an I2C device with address of 0xC3, however you can also communicate with it using SPI at address 0x78. Very versatile and fun to use. It does not have readable RAM so it uses 1K of the Arduino's RAM for video buffering... more detail given below

    Probably one of the brightest, most versatile and inexpensive OLED currently on the...

    Probably one of the brightest, most versatile and inexpensive OLED currently on the market - great with Arduino or the WCT Pro Mini+. It's an I2C device with address of 0xC3,...

  •  MPX5700AP PRESSURE SENSOR _A0538
    Available
    MPX5700AP PRESSURE SENSOR _A0538

    Product Information Connection Size: 4.928mm MSL: - No. of Pins: 6 Operating Pressure Max: 700kPa Operating Pressure Min: 15kPa Operating Temperature Max: 125°C Operating Temperature Min: -40°C Packaging: Each Pressure Type: Absolute SVHC: No SVHC (17-Dec-2014) Sensitivity, V/P: ...more detail given below

    Product Information Connection Size: 4.928mm MSL: - No. of Pins: 6 Operating Pressure...

    Product Information Connection Size: 4.928mm MSL: - No. of Pins: 6 Operating Pressure Max: 700kPa Operating Pressure Min: 15kPa Operating Temperature Max: 125°C Operating...

  • ZIF Socket 28-Pin 0.3" _A0534
    Available
    ZIF Socket 28-Pin 0.3" _A0534

    Description: This is a high-quality, easy to use 28 pin ZIF socket that is 0.3" wide. Makes for easy connecting or programming to DIP ICs. Uses high conductivity terminals create solid connections. Can also be used for smaller pin packages.

    Description: This is a high-quality, easy to use 28 pin ZIF socket that is 0.3" wide....

    Description: This is a high-quality, easy to use 28 pin ZIF socket that is 0.3" wide. Makes for easy connecting or programming to DIP ICs. Uses high conductivity terminals...

  • 170 Tie Point Small prototyping breadboard
    Available
    170 Tie Point Small prototyping breadboard _A0531

    This is a mini breadboard with 170 tie points. It is ideal for small projects and for mounting it on the Arduino or Freeduino protoshield. It includes a double sided sticker for easy attachment to any surface.

    This is a mini breadboard with 170 tie points. It is ideal for small projects and for...

    This is a mini breadboard with 170 tie points. It is ideal for small projects and for mounting it on the Arduino or Freeduino protoshield. It includes a double sided sticker for...

  • Infrared Thermometer (IR) module MLX90614 family (Arduino compatible) _ A0530
    Out of stock
    Infrared Thermometer (IR) module MLX90614 family (Arduino compatible) _ A0530

    It is infrared thermometer with an I2C interface. Uses the MELEXIS MLX90614ESF-BAA-000-TU-ND chip which works as a contactless temperature measurement sensor. It is Easy to use with an Arduino or other microcontroller. Infrared thermometer MLX90614 specifications:- Measuring temperature range: -40 - + 125 ° C - Operating temperature range: -70 - + 380 ° C, ...detail below

    It is infrared thermometer with an I2C interface. Uses the MELEXIS...

    It is infrared thermometer with an I2C interface. Uses the MELEXIS MLX90614ESF-BAA-000-TU-ND chip which works as a contactless temperature measurement sensor. It is Easy to use...

    ₨ 1,500
    Add to cart View
  • Digital Tachometer (Speed detection) Module _A0529
    Available
    Digital Tachometer (Speed detection) Module _A0529

    The Puzzle - Tachometer is a simple module that allow you to test the speed of the motor.Widely used for motor speed detection, Pulse count, position limit, and so on...more detail given below

    The Puzzle - Tachometer is a simple module that allow you to test the speed of the...

    The Puzzle - Tachometer is a simple module that allow you to test the speed of the motor.Widely used for motor speed detection, Pulse count, position limit, and so on...more...

  • Transparent Acrylic Box For Arduino UNO _A0527
    Available
    Transparent Acrylic Box For Arduino UNO _A0527

    Transparent Acrylic Shell Box For Arduino UNO R3 BoardFeature:With EN instructions.Weight: 53gDimensions: 79.5 x 64.5 x 21mmMaterial: A grade acrylic sheetFor Arduino UNO R3 Development Board onlyNote: The UNO R3 is not included.

    Transparent Acrylic Shell Box For Arduino UNO R3 BoardFeature:With EN...

    Transparent Acrylic Shell Box For Arduino UNO R3 BoardFeature:With EN instructions.Weight: 53gDimensions: 79.5 x 64.5 x 21mmMaterial: A grade acrylic sheetFor Arduino UNO R3...

  • 5 inch TFT Touch Screen 800X480 ( Mega2560 and Raspberry Pi Compatible) _A0498
    Out of stock
    5 inch TFT Touch Screen 800X480 ( Mega2560 and Raspberry Pi Compatible) _A0498

    This 5 inch TFT LCD Display module has a 16M color capable LCD with a resolution of 800 x 480 pixels. The module includes Resistive Touch Screen Panel and a Standard SD Card slot. SSD1963 is used to control LCD and the touch panel is controlled by XPT2046.. best website for library : http://www.rinkydinkelectronics.com/library.php?id=51 more detalil given below

    This 5 inch TFT LCD Display module has a 16M color capable LCD with a resolution of 800...

    This 5 inch TFT LCD Display module has a 16M color capable LCD with a resolution of 800 x 480 pixels. The module includes Resistive Touch Screen Panel and a Standard SD Card...

    ₨ 5,500
    Add to cart View
  • Double-Sided Protoboard 5cm x 7cm _A0471
    Available
    Double-Sided Protoboard 5cm x 7cm _A0471

    Specification Base Material : FR - 4 Protoboard Type : Double Side Board Size : 5 x 7cm Board Thickness : 1.6mm Hole Pitch : 2.54mm Hole Quantity : 18 x 24

    Specification Base Material : FR - 4 Protoboard Type : Double Side Board Size : 5 x...

    Specification Base Material : FR - 4 Protoboard Type : Double Side Board Size : 5 x 7cm Board Thickness : 1.6mm Hole Pitch : 2.54mm Hole Quantity : 18 x 24

  • 9V Super Heavy Duty Battery_A0481
    Available
    9V Super Heavy Duty Battery_A0481

    It is a high Quality 9V battery used in regular student project, best for Arduino etc. Specs: Int. Frame size to IEC: 6F22Voltage: 9VWeight: 36.4gramsZinc manganese dioxide/Zinc/ammonium chloride Mecuary: 0%Nominal Capacity: 450mAh to 4,8V                                  (20° ± 2° C rated capacity at 25mA continuous drain)  

    It is a high Quality 9V battery used in regular student project, best for Arduino etc....

    It is a high Quality 9V battery used in regular student project, best for Arduino etc. Specs: Int. Frame size to IEC: 6F22Voltage: 9VWeight: 36.4gramsZinc manganese...

  • 8x8  RGB LED Dot Matrix module _A0469
    Available
    8x8 RGB LED Dot Matrix module _A0469

    Do you know how is the cool advertising display made? It is exactly composed of these small RGB LED matrix. If you want to make a similar display, this RGB LED matrix will meet you need. The 8x8 LED matrix has 32 of pins, you may need a driver to control it....more detail given below

    Do you know how is the cool advertising display made? It is exactly composed of these...

    Do you know how is the cool advertising display made? It is exactly composed of these small RGB LED matrix. If you want to make a similar display, this RGB LED matrix will meet...

  • Wrobot Full Color RGB LED Module_A0480
    Available
    Wrobot Full Color RGB LED Module_A0480

    Detail given below

    Detail given below

    Detail given below

  • Micro TF SD Card Module_A0477
    Available
    Micro TF SD Card Module_A0477

    Control Interface:A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin3.3V regulator circuit:LDO regulator output 3.3V as level converter chip, Micro SD card supply.. more detail given below.

    Control Interface:A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,...

    Control Interface:A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal...

  • 9v battery clip with 5.5mm/2.1mm plug_A0402
    Available
    9v battery clip with 5.5mm/2.1mm plug_A0402

    This battery clip attaches to a 9v battery and the barrel plug fits perfectly in the Arduino power port. Features: Cable Length: About 10cm Plastic T-type connector 5.5×2.1mm connector 10cm leads, 1 red and 1 black Snap-on terminal connector for 9-volt battery

    This battery clip attaches to a 9v battery and the barrel plug fits perfectly in the...

    This battery clip attaches to a 9v battery and the barrel plug fits perfectly in the Arduino power port. Features: Cable Length: About 10cm Plastic T-type connector 5.5×2.1mm...

  • TCS3200 Color Sensor Module _A0401
    Available
    TCS3200 Color Sensor Module _A0401

    TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few.... more detail given detail

    TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor...

    TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 can detect and measure a nearly limitless range of...

  • ULN2003 Driver Board_A0398
    Available
    ULN2003 Driver Board_A0398

    A, B, C, D four-phase LED indicates the status of the stepper motor work.Stepper motor with a standard interface, when used directly pluggable.Drive Module Board Size:2.8cm x 2.8cm x 2cm - 1.1inch x 1.1inch x 0.79inch. 

    A, B, C, D four-phase LED indicates the status of the stepper motor work.Stepper motor...

    A, B, C, D four-phase LED indicates the status of the stepper motor work.Stepper motor with a standard interface, when used directly pluggable.Drive Module Board Size:2.8cm x...

  • On sale!
    Speech/Voice Recognition Module V3 (latest version)
    Available
    Speech/Voice Recognition Module V3 (latest version) _ A0343

    Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking) Maximum 7 voice commands effective at same time Arduino library is supplied Easy Control: UART/GPIO User-control General Pin Output  ... more detail given below

    Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking)...

    Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking) Maximum 7 voice commands effective at same time Arduino library is supplied Easy Control:...

    Reduced price! ₨ 2,950
    Add to cart View
  • Anemometer / Wind Speed Sensor (Output 4-20mA / 0-5V )
    Available
    Anemometer / Wind Speed Sensor (Output 4-20mA / 0-5V )_A0337

    Body Material: Metal AlloyThe core sensor types: honeywell sensor  Signal output way: pulse current: 4-20 mA /0-5V Sensor styles: three cups  Start wind speed: 0.2 m/s  Effective wind speed measuring range: 0 to 30 m/s  System error: plus or minus 3  Connection mode: three wire system  Working temperature: - 40  ~ 80  Power supply: DC12-24 V

    Body Material: Metal AlloyThe core sensor types: honeywell sensor  Signal output way:...

    Body Material: Metal AlloyThe core sensor types: honeywell sensor  Signal output way: pulse current: 4-20 mA /0-5V Sensor styles: three cups  Start wind speed: 0.2 m/s...

  • Voltage Sensor  (0-25V)
    Available
    Voltage Sensor (0-25V)_A0326

    Voltage input range: DC0-25VVoltage detection range: DC0.02445V-25VVoltage Analog Resolution: 0.00489VDC input connector: Terminal cathode connected to VCC, GND negative poleOutput interface: "+" then 5/3.3V, "-" then GND, "s" then the Arduino AD pins 

    Voltage input range: DC0-25VVoltage detection range: DC0.02445V-25VVoltage Analog...

    Voltage input range: DC0-25VVoltage detection range: DC0.02445V-25VVoltage Analog Resolution: 0.00489VDC input connector: Terminal cathode connected to VCC, GND negative...

  • Dual H-Bridge Motor Driver Module (L298)
    Available
    Dual H-Bridge Motor Driver Module (L298)_A0023

    This dual bidirectional motor driver is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently control two motors of up to 2A each in both directions. It is ideal for robotic applications and well suited for connection to a microcontroller requiring just a couple of control lines per motor.

    This dual bidirectional motor driver is based on the very popular L298 Dual H-Bridge...

    This dual bidirectional motor driver is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently...

  • Stackable Header (6&8 Pin Set)
    Available
    Stackable Header (6&8 Pin Set)_A0268

    Difficult to obtain headers for Arduino-style shields.  These are the same headers used by many shield manufacturers.  They have 10.5mm long tails and 8.5mm deep sockets. These differ from standard headers as they have long tails to facilitate board stacking--of course, these can also be used in any project where board stacking is necessary.Pins are spaced by 0.1"(2.54mm pitch)

    Difficult to obtain headers for Arduino-style shields.  These are the same headers used...

    Difficult to obtain headers for Arduino-style shields.  These are the same headers used by many shield manufacturers.  They have 10.5mm long tails and 8.5mm deep sockets. These...

  • Power Supply Adapter for Arduino (9v 1A)
    Out of stock
    Power Supply Adapter for Arduino (9v 1A)_A0266

    If you have attached many sensors or motors and your arduino is not cable to take the current  from the USB port of your PC or you are going to power-up your arduino without USB port then you would need to use this adapter . The specification is given below.Input: 100V - 240V AC, 50 - 60 Hz 0.5AOutput: 9V DC 1000mAWeight: 121gPlug: US plug 

    If you have attached many sensors or motors and your arduino is not cable to take the...

    If you have attached many sensors or motors and your arduino is not cable to take the current  from the USB port of your PC or you are going to power-up your arduino without USB...

    ₨ 150
    Add to cart View
  • 4WD SMART ROBOTIC CAR CHASSIS KIT INCLUDING GEAR MOTORS
    Available
    4WD 4 wheel Smart Robotic Car Chassis _A0055

    Four wheel drive smart car chassis kit. Very easy to construct, just add micro-controller (such as Arduino), and sensor modules to build a fully autonomous robot.

    Four wheel drive smart car chassis kit. Very easy to construct, just add...

    Four wheel drive smart car chassis kit. Very easy to construct, just add micro-controller (such as Arduino), and sensor modules to build a fully autonomous robot.

  • 20A CURRENT SENSOR MODULE ACS712ELCTR-20A (+/- 20 AMP)
    Available
    20A CURRENT SENSOR MODULE ACS712ELCTR-20A (+/- 20 AMP)_A0180

    This current sensor gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems.

    This current sensor gives precise current measurement for both AC and DC signals. These...

    This current sensor gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems.

  • 30A CURRENT SENSOR MODULEACS712ELCTR-30A
    Available
    30A CURRENT SENSOR MODULE ACS712ELCTR-30A_A0096

    Specifications: 1. Current sensor chip: ACS712ELC-30A;2. Pin 5V power supply, on-board power indicator;3. The module can be measured plus or minus 30 amps, corresponding to the analog output 66mV / A;4. There is no detection current through, the output voltage is VCC / 2;5. PCB board size: 31 (mm) x13 (mm);Note: ACS712 Hall detection principle, when you use to avoid magnetic field impact this!

    Specifications: 1. Current sensor chip: ACS712ELC-30A;2. Pin 5V power supply, on-board...

    Specifications: 1. Current sensor chip: ACS712ELC-30A;2. Pin 5V power supply, on-board power indicator;3. The module can be measured plus or minus 30 amps, corresponding to the...

  • ATMEGA328P-PU MICRO-CONTROLLER WITH ARDUINO BOOTLOADER
    Out of stock
    ATMEGA328P-PU MICRO-CONTROLLER WITH ARDUINO BOOTLOADER_A0045

    Product Description: This high performance, low power AVR® 8-bit microcontroller (ATMEGA328P-PU) is programed with the Arduino bootloader. Useful for replacing older chips or making your own ’duino boards. Perfect for building your own Arduino-compatible project directly on a breadboard or on a custom PCB, or for replacing the MCU in an existing board.

    Product Description: This high performance, low power AVR® 8-bit microcontroller...

    Product Description: This high performance, low power AVR® 8-bit microcontroller (ATMEGA328P-PU) is programed with the Arduino bootloader. Useful for replacing older chips or...

    ₨ 400
    Add to cart View
  • 7 INCH TFT LCD TOUCH SCREEN (MD070SD)
    Available
    7 INCH TFT LCD TOUCH SCREEN (MD070SD)_A0258

    Screen size: 7" TFT LCD (with integrated touch panel IC)Resolution: 800x480Controller Module: MD070SDInput power: 2.8v~3.3v 

    Screen size: 7" TFT LCD (with integrated touch panel IC)Resolution: 800x480Controller...

    Screen size: 7" TFT LCD (with integrated touch panel IC)Resolution: 800x480Controller Module: MD070SDInput power: 2.8v~3.3v 

  • SERIAL IIC/I2C/TWI 1602 16X2 CHARACTER LCD MODULE DISPLAY
    Out of stock
    SERIAL IIC/I2C/TWI 1602 16X2 CHARACTER LCD MODULE DISPLAY_A0181

    It is another great Blue backlight LCD display. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card.

    It is another great Blue backlight LCD display. As the pin resources of Arduino...

    It is another great Blue backlight LCD display. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with...

    ₨ 700
    Add to cart View
  • 3.2 INCHES TFT COLOR LCD SCREEN MODULE (ARDUINO COMPATIBLE)
    Out of stock
    3.2 INCHES TFT COLOR LCD SCREEN MODULE (ARDUINO COMPATIBLE)_A0166

    TFT01_3.2 is a TFT LCD Screen Module , 40pins interface , not just a LCD break but include the Touch , SD card and Flash design. So its a powerful extension module for your project.The Screen include a controller SSD1289-spec.pdf, it s a support 16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051 etc.

    TFT01_3.2 is a TFT LCD Screen Module , 40pins interface , not just a LCD break but...

    TFT01_3.2 is a TFT LCD Screen Module , 40pins interface , not just a LCD break but include the Touch , SD card and Flash design. So its a powerful extension module for your...

    ₨ 2,500
    Add to cart View
  • 12864 128 X 64 DOTS GRAPHIC BLUE COLOR BACKLIGHT LCD DISPLAY MODULE
    Available
    12864 128X64 Ks0108 DOTS GRAPHIC BLUE COLOR BACKLIGHT LCD DISPLAY MODULE_A0130

    Specifications: Brand New and High QualitySize: 93.0 (L) × 70.0(W) × 13.50(H) mmView area: 70.0mm (L) × 38.8mm (W)Dots size: 0.48mm (L) × 0.48mm (W)Dots pitch: 0.52mm (L) × 0.52mm (W)LCD type: STN(BLUE), TRANSMISSIVE /NEGATIVEViewing angle: 6 o?clockOperating temp: -20 to 70Storage temp: -30 to 80

    Specifications: Brand New and High QualitySize: 93.0 (L) × 70.0(W) × 13.50(H) mmView...

    Specifications: Brand New and High QualitySize: 93.0 (L) × 70.0(W) × 13.50(H) mmView area: 70.0mm (L) × 38.8mm (W)Dots size: 0.48mm (L) × 0.48mm (W)Dots pitch: 0.52mm (L) ×...

  • INFRARED LIGHT BEAM PHOTOELECTRIC SENSOR MODULE WITH LM393 IC
    Available
    IR Photoelectric Encoder Sensor Module With Amplifier_A0151

    Module Features:1, the use of imported groove coupler sensor2, the groove width of 10mm.3, the output state indicator lamp output high, output low lights.4, block, output high; unobstructed, output low.5, the comparator output signal clean, good waveform, driving ability, more than 15mA.

    Module Features:1, the use of imported groove coupler sensor2, the groove width of...

    Module Features:1, the use of imported groove coupler sensor2, the groove width of 10mm.3, the output state indicator lamp output high, output low lights.4, block, output high;...

  • LIGHT INTENSITY BH1750FVI ILLUMINATION MODULE
    Out of stock
    LIGHT INTENSITY BH1750FVI ILLUMINATION MODULE_A0138

    Key Features: Original BH1750FVI chip using ROHMPower supply :3-5vIllumination range :0-65535 lx1 Sensors built 16bitAD converter2 Direct digital output, omitting complex calculations, calibration is omitted3 Does not distinguish between ambient light

    Key Features: Original BH1750FVI chip using ROHMPower supply :3-5vIllumination range...

    Key Features: Original BH1750FVI chip using ROHMPower supply :3-5vIllumination range :0-65535 lx1 Sensors built 16bitAD converter2 Direct digital output, omitting complex...

    ₨ 500
    Add to cart View
  • DIY ARDUINO COMPATIBLE INFRARED (IR) SENSOR RECEIVER MODULE
    Available
    DIY ARDUINO COMPATIBLE INFRARED (IR) SENSOR RECEIVER MODULE_A0137

    DescriptionIR Receiver Module is a 38KHz infrared receiver module which is Arduino compatible. It can receive the standard 38KHz modulated remote controller signal. Through programing the Arduino, you can realize decoding of the remote controller signal. Using this item, you can make a universal remote controller with learning function.

    DescriptionIR Receiver Module is a 38KHz infrared receiver module which is Arduino...

    DescriptionIR Receiver Module is a 38KHz infrared receiver module which is Arduino compatible. It can receive the standard 38KHz modulated remote controller signal. Through...

  • MINI 650NM 3V HEAD LASER DIODE
    Available
    MINI 650NM 3V HEAD LASER DIODE_A0084

    Key Features Output Power: 2-5mW Wavelength: 650nm Working Voltage: 3v-5v Operating Current: less than 40 mA Laser Shape: Dot Working temperature: -10 ℃~+40 ℃ housing: Copper Dimensions: 6.5 X 18 mm

    Key Features Output Power: 2-5mW Wavelength: 650nm Working Voltage: 3v-5v Operating...

    Key Features Output Power: 2-5mW Wavelength: 650nm Working Voltage: 3v-5v Operating Current: less than 40 mA Laser Shape: Dot Working temperature: -10 ℃~+40 ℃ housing: Copper...

  • MPU-9150 9 DOF IMU (ACCELLEROMETER+GYRO +MEGNETOMETER) 3 IN 1
    Available
    GY-9150 MPU-9150 9 DOF IMU (ACCELLEROMETER+GYRO +MEGNETOMETER) 3 IN 1_A0139

    Description: The MPU-9150™ is the world’s first 9-axis MotionTracking device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors. The MPU9150 is a System in Package (SiP) that combines two chips: the MPU-6050, which contains a 3-axisgyroscope, 3-axis accelerometer, and an onboard DMP

    Description: The MPU-9150™ is the world’s first 9-axis MotionTracking device designed...

    Description: The MPU-9150™ is the world’s first 9-axis MotionTracking device designed for the low power, low cost, and high performance requirements of consumer electronics...

  • AHRS 9DOF IMU WITH ON-BOARD ATMEGA328 MODULE(ITG3205 + ADXL345 + HMC5883L + ATMEGA328)
    Available
    GY-951 9DOF IMU WITH ON-BOARD ATMEGA328 MODULE(ITG3205 + ADXL345 + HMC5883L + ATMEGA328)_A0112

    Description: Model: GY-951 Using the chip: Atmega328 + ITG3205 + the ADXL345 + HMC5883L Power supply :3-5V Means of communication: serial communication protocol Size: 2.3cm * 1.7cm

    Description: Model: GY-951 Using the chip: Atmega328 + ITG3205 + the ADXL345 +...

    Description: Model: GY-951 Using the chip: Atmega328 + ITG3205 + the ADXL345 + HMC5883L Power supply :3-5V Means of communication: serial communication protocol Size: 2.3cm * 1.7cm

  • 10DOF IMU (L3G4200D + ADXL345 + HMC5883L + BMP085)
    Available
    GY-80 10DOF IMU (L3G4200D + ADXL345 + HMC5883L + BMP085)_A0100

    Description: Nine axis module (three-axis gyroscope + triaxial accelerometer + 3-axis magnetic field + pressure) Power supply :3-5v Communication: IIC communication protocol (fully compatible with 3-5v system) Module size: 25.8mm * 16.8mm, mounting hole 3mm

    Description: Nine axis module (three-axis gyroscope + triaxial accelerometer +...

    Description: Nine axis module (three-axis gyroscope + triaxial accelerometer + 3-axis magnetic field + pressure) Power supply :3-5v Communication: IIC communication protocol...

  • 6DOF IMU MPU-6050 3-AXIS GYRO+ACCELEROMETER MODULE
    Available
    GY-521 6DOF IMU MPU-6050 3-AXIS GYRO+ACCELEROMETER MODULE_A0035

    FeaturesName: MPU-6050 module (three axis gyro + three axis acceleration) Use chip: MPU-6050 The power supply: 3-5 v (internal low voltage difference voltage stabilizing) Communication: standard IIC communication agreement Chip built-in 16 bit AD converter, 16 bits of data output The gyroscope range: + 250 500 1000 2000 /s Acceleration range: 2 4 8 16 g 

    FeaturesName: MPU-6050 module (three axis gyro + three axis acceleration) Use chip:...

    FeaturesName: MPU-6050 module (three axis gyro + three axis acceleration) Use chip: MPU-6050 The power supply: 3-5 v (internal low voltage difference voltage stabilizing)...

  • ADXL335 3-AXIS ACCELEROMETER MODULE (ANALOG OUTPUT )
    Available
    GY-61 ADXL335 3-AXIS ACCELEROMETER MODULE (ANALOG OUTPUT )_A0032

    Features: Chip: ADXL335. Power supply: 3.3-5V. X,Y,Z output.

    Features: Chip: ADXL335. Power supply: 3.3-5V. X,Y,Z output.

    Features: Chip: ADXL335. Power supply: 3.3-5V. X,Y,Z output.

  • ADXL345 3-AXIS ACCELEROMTER MODULE (DIGITAL OUTPUT)
    Available
    GY-291 ADXL345 3-AXIS ACCELEROMTER MODULE (DIGITAL OUTPUT)_A0028

    Description : The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is acces-sible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. 

    Description : The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with...

    Description : The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as...

  •  HMC5883L TRIPLE AXIS MAGNETOMETER ( 3-AXIS DIGITAL COMPASS ) MODULE
    Available
    GY-271 3-AXIS HMC5883L DIGITAL MAGNETOMETER/COMPASS MODULE _A0026

    Using a magnetometer can be a little tricky, especially if you are unsure about the formulas to use to get the correct bearing and when other magnetic objects are interfering with your signal. You could download a arduino library for this module, which will also be compatible with other HMC5883L breakout boards made by other manufacturers.

    Using a magnetometer can be a little tricky, especially if you are unsure about the...

    Using a magnetometer can be a little tricky, especially if you are unsure about the formulas to use to get the correct bearing and when other magnetic objects are interfering...

  • NEO-6M GPS MODULE WITH EEPROM AND ACTIVE ANTENNA
    Available
    NEO-6M GPS MODULE WITH EEPROM AND ACTIVE ANTENNA_A0150

    Product Description:   GPS APM2.5 NEO-6M Module With EEPROM To Save Data With  Active Antenna   The GPS module, 3V-5V power supply universal Ublox NEO-6M module with ceramic margin with antenna, signal strength With data backup battery With power failure data storage EEPROM The size of the antenna 22*22mm

    Product Description:   GPS APM2.5 NEO-6M Module With EEPROM To Save Data With  Active...

    Product Description:   GPS APM2.5 NEO-6M Module With EEPROM To Save Data With  Active Antenna   The GPS module, 3V-5V power supply universal Ublox NEO-6M module with ceramic...

  • 3DR RADIO WIRELESS DATE TRANSMISSION MODULE
    Out of stock
    3DR RADIO WIRELESS DATE TRANSMISSION MODULE_A0140

    It's designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915/433Mhz;and in the following configurations:serial board(for the air) and USB (for the ground).  Note: This Product can only be delivery after we get a latter on University/Company letterhead mentioning the purpose of use.

    It's designed as an open source Xbee replacement radio set, offering a lower price,...

    It's designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in...

    ₨ 3,500
    Add to cart View
  • BLUETOOTH MODULE HC-06/05 VERSION 1.5
    Available
    BLUETOOTH MODULE HC-06 VERSION 1.5_A0088

    The Bluetooth Modem is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC-05/HC-06 module. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target.

    The Bluetooth Modem is the latest Bluetooth wireless serial cable! This version of the...

    The Bluetooth Modem is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC-05/HC-06 module. These modems work as a serial (RX/TX) pipe....

  • SERIAL TO WIFI MODULE TLN13UA06 (UART-WIFI MODULE, NETWORK SERVER/CLIENT )
    Out of stock
    SERIAL TO WIFI MODULE TLN13UA06 (UART-WIFI MODULE, NETWORK SERVER/CLIENT )_A0079

    Applications Intelligent transportation networks, such as wireless credit card machine Instrumentation, equipment parameter monitoring, Microfinance payment networks, such as wireless POS machines Industrial networking equipment, such as wireless sensors WIFI remote control, WIFI toys (model aircraft, remote control cars) WIFI POS machine, WIFI, electronic scales, WIFI chip control 

    Applications Intelligent transportation networks, such as wireless credit card machine...

    Applications Intelligent transportation networks, such as wireless credit card machine Instrumentation, equipment parameter monitoring, Microfinance payment networks, such as...

    ₨ 1,600
    Add to cart View
  • RFID MIFARE RC522 13.56MHZ CARD READER MODULE
    Available
    MIFARE RC522 13.56Mhz RFID Reader Module with Tags_A0018

    Features: Basic on the Philips MFRC522 Chip Power Voltage : 3.3V  Current :13-26mA Operating frequency: 13.56MHz Read Range: 0 ~ 60mm (mifare1 card) Interface: SPI Dimensions: 40mm × 60mm Size of Round Tag : 0.87 × 85.5 × 54 mm Size of Rectangle Tag : 32 x 40.5 x 4.2  mm

    Features: Basic on the Philips MFRC522 Chip Power Voltage : 3.3V  Current :13-26mA...

    Features: Basic on the Philips MFRC522 Chip Power Voltage : 3.3V  Current :13-26mA Operating frequency: 13.56MHz Read Range: 0 ~ 60mm (mifare1 card) Interface: SPI Dimensions:...

  • 433 MHZ WIRELESS TX AND RX MODULE
    Available
    433MHz Wireless TX and RX Module_A0008

    Product Features:Super-regenerative receiver module using the LC oscillator circuit ,containing zoom in shaping,output TTL level, directly to the decoder and extremely easy to use.It has a wide receiver bandwidth, usually ± 10MHz,  the voltage adjustment range of 3 ~ 8V. frequency adjustment of the frequency range of 100MHz ~ 500MHz if order 100 pcs;Static operating current defullt is 4mA.

    Product Features:Super-regenerative receiver module using the LC oscillator circuit...

    Product Features:Super-regenerative receiver module using the LC oscillator circuit ,containing zoom in shaping,output TTL level, directly to the decoder and extremely easy to...

  • NRF24L01+ 2.4GHZ WIRELESS TRANSCEIVER MODULE
    Available
    NRF24L01+ 2.4GHZ WIRELESS TRANSCEIVER MODULE_A0007

    Product Description: - NRF24L01 is a universal ISM band monolithic transceiver chip works in the 2.4-2.5GHz - Wireless transceiver including: Frequency generator, enhanced type, SchockBurstTM, mode controller, power amplifier, crystal amplifier, modulator, demodulator - Built-in 2.4GHz antenna... Note: Will be ship After a buyer has successfully authenticated.

    Product Description: - NRF24L01 is a universal ISM band monolithic transceiver chip...

    Product Description: - NRF24L01 is a universal ISM band monolithic transceiver chip works in the 2.4-2.5GHz - Wireless transceiver including: Frequency generator, enhanced type,...

  • INE HUNTING /INFRARED TRACKING SENSOR MODULE_A0243
    Available
    INE HUNTING /INFRARED LINE TRACKING SENSOR MODULE_A0243

      Photosensitive diode Working power: + 5V Working current: < 10mA Working temperature range: 0'C 50'C Output electrical level signal: TTL Output interface: 3 wire Easy to installpin1. gnd2. out3. 5vcc

      Photosensitive diode Working power: + 5V Working current: < 10mA Working...

      Photosensitive diode Working power: + 5V Working current: < 10mA Working temperature range: 0'C 50'C Output electrical level signal: TTL Output interface: 3 wire Easy to...

  • DS18B20 DIGITAL TEMPERATURE SENSOR
    Available
    DS18B20 DIGITAL TEMPERATURE SENSOR_A0179

    Description: This is the latest DS18B20 1-Wire digital temperature sensor from Maxim IC. Reports degrees C with 9 to 12-bit precision, -55C to 125C (+/-0.5C). Each sensor has a unique 64-Bit Serial number etched into it - allows for a huge number of sensors to be used on one data bus. This is a wonderful part that is the corner stone of many data-logging and temperature control projects.

    Description: This is the latest DS18B20 1-Wire digital temperature sensor from Maxim...

    Description: This is the latest DS18B20 1-Wire digital temperature sensor from Maxim IC. Reports degrees C with 9 to 12-bit precision, -55C to 125C (+/-0.5C). Each sensor has a...

  • DHT22 DIGITAL TEMPERATURE AND HUMIDITY SENSOR
    Available
    DHT22 DIGITAL TEMPERATURE AND HUMIDITY SENSOR_A0171

    The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). 

    The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a...

    The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a...

  • WATER LEVEL SENSOR MODULE
    Out of stock
    Water /Rain Drop Sensor Module_A0135

    Product Specifications:Product Name: water level sensor Operating voltage: DC3-5V Operating Current: less than 20mA Sensor Type: Analog Detection area: 40mm x 16mm Production process: FR4 double-sided HASL Operating temperature: 10 Degree to - 30 Degree Humidity: 10% -90% non-condensing Product weight: 3.5g Size: 62mm x 20mm x 8mm 

    Product Specifications:Product Name: water level sensor Operating voltage: DC3-5V...

    Product Specifications:Product Name: water level sensor Operating voltage: DC3-5V Operating Current: less than 20mA Sensor Type: Analog Detection area: 40mm x 16mm Production...

    ₨ 100
    Add to cart View
  • SOIL MOISTURE SENSOR
    Available
    Soil Moister Sensor/ Soil Hygrometer _A0009

    Description: This is a simple water sensor ,can be used to detect soil moisture .Module Output is high level when the soil moisture deficit, or output is low. Can be used in module plant waterer device, and the plants in your garden no need people to manage Adjustable sensitivity by adjusting the digital potentiometer (shown in blue) Operating voltage:3.3V~5V

    Description: This is a simple water sensor ,can be used to detect soil moisture .Module...

    Description: This is a simple water sensor ,can be used to detect soil moisture .Module Output is high level when the soil moisture deficit, or output is low. Can be used in...

  • MICROPHONE SOUND DETECTION SENSOR MODULE
    Available
    MICROPHONE SOUND DETECTION SENSOR MODULE_A0149

    Features high sensitivity, Electret Condenser Microphone (ECM) sensor Power supply indicator lamp Comparator output indicator lamp AO, real-time microphone voltage signal output DO, high / low electric level signal output Analog quantity output Threshold rollover electric level output Sensitivity adjusted by potentiometer Power Supply: 5V DC

    Features high sensitivity, Electret Condenser Microphone (ECM) sensor Power supply...

    Features high sensitivity, Electret Condenser Microphone (ECM) sensor Power supply indicator lamp Comparator output indicator lamp AO, real-time microphone voltage signal output...

  • MQ-5 NATURAL GAS SENSOR MODULE
    Available
    MQ-5 NATURAL GAS SENSOR MODULE_A0111

    DescriptionThe analog gas sensor - MQ5 is used in gas leakage detecting equipments in consumer and industry markets, this sensor is suitable for detecting LPG, ibutane, propane, methane ,alcohol, Hydrogen, smoke.It has a high sensitivity and fast response time.And the sensitivity can be adjusted by the potentiometer. Size: 38x27mm

    DescriptionThe analog gas sensor - MQ5 is used in gas leakage detecting equipments in...

    DescriptionThe analog gas sensor - MQ5 is used in gas leakage detecting equipments in consumer and industry markets, this sensor is suitable for detecting LPG, ibutane, propane,...

  • WATERPROOF DS18B20 TEMPERATURE PROBE
    Available
    WATERPROOF DS18B20 TEMPERATURE PROBE_A0075

    Product Description: Probe DS18B20 temperature sensor chip using originalHigh quality stainless steel pipe anti-rust waterproof package3.0V ~ 5.5V power supply 9 to 12 adjustable resolutionWide temperature range of -55 Celsius ~ +125 Celsius

    Product Description: Probe DS18B20 temperature sensor chip using originalHigh quality...

    Product Description: Probe DS18B20 temperature sensor chip using originalHigh quality stainless steel pipe anti-rust waterproof package3.0V ~ 5.5V power supply 9 to 12...

  • INFRARED (IR) OBSTACLE AVOIDANCE SENSOR
    Available
    INFRARED (IR) OBSTACLE AVOIDANCE SENSOR_A0086

    eatures:   object is sensed output 0, output 1 is not sensitive to the time, directly with 3V and 5V microcontroller IO port connected.

    eatures:   object is sensed output 0, output 1 is not sensitive to the time, directly...

    eatures:   object is sensed output 0, output 1 is not sensitive to the time, directly with 3V and 5V microcontroller IO port connected.

  • SHARP GP2Y0A02YK0F ANALOG DISTANCE SENSOR 20-150CM
    Available
    SHARP GP2Y0A02YK0F ANALOG DISTANCE SENSOR 20-150CM_A0025

    The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20 cm to 150 cm). The high maximum detection distance makes this sensor a viable alternative to sonar in some applications. The distance is indicated by an analog voltage, making this sensor very easy to use.

    The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a...

    The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20 cm to 150 cm). The high maximum detection distance makes this...

  • 5V-3V FOUR CHANNEL LEVEL CONVERTER MODULE(FOR UART/IIC/1-WIRE/SPI)
    Available
    5V-3V FOUR CHANNEL LEVEL CONVERTER MODULE(FOR UART/IIC/1-WIRE/SPI)_A0125

    Features: Four MOS tube : four channel , two-way conversation 3V and 5V The power input with anti-reverse protection, integrated 3.3VLDO,and provide current less than 150mA With power indicate Used for UART/IIC/1-WIRE/SPI 

    Features: Four MOS tube : four channel , two-way conversation 3V and 5V The power input...

    Features: Four MOS tube : four channel , two-way conversation 3V and 5V The power input with anti-reverse protection, integrated 3.3VLDO,and provide current less than 150mA With...

  •  FT232RL USB TO SERIAL CONVERTER MODULE
    Available
    FT232RL USB TO SERIAL CONVERTER MODULE_A0071

    Description: Very low-cost way to add USB capability to an Arduino or other microcontroller. Use to give your own breadboard Arduino USB capability for bootloading or downloading sketches. Note: this board includes a DTR pin needed to auto-reset Arduino when downloading to your device.

    Description: Very low-cost way to add USB capability to an Arduino or other...

    Description: Very low-cost way to add USB capability to an Arduino or other microcontroller. Use to give your own breadboard Arduino USB capability for bootloading or...

  • FT232RL Xbee Adapter _A0010
    Available
    XBee Explorer Dongle (Adapter/Explorer/Programmer) FT232RL with USB cable _A0010

      Features: Bee Adapter V1.2 is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated  FT232RL IC, It can be used for programming or communicating with board which basic Arduino but without USB  interface, like Sniffer Nano. On the other hand, you may connect your PC to various wireless applications via the BEE  compatible modules.

      Features: Bee Adapter V1.2 is a compact USB to serial adapter equipped with BEE...

      Features: Bee Adapter V1.2 is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated  FT232RL IC, It can be used for programming or...

  • ROTARY ENCODER MODULE
    Out of stock
    ROTARY ENCODER MODULE_A0144

    Description: These are continuous rotary encoder switcWith built in push button switch (push to operate)

    Description: These are continuous rotary encoder switcWith built in push button switch...

    Description: These are continuous rotary encoder switcWith built in push button switch (push to operate)

    ₨ 270
    Add to cart View
  • DUAL-AXIS XY JOYSTICK MODULE
    Available
    DUAL-AXIS XY JOYSTICK MODULE_A0108

    Dual-axis XY Joystick Module for Arduino Dimensions: 4 X 2.6 X 3.2CM2 potentiometers for 2 axes1 switchConnector: +5Vcc - GND - VRx - VRy - SW

    Dual-axis XY Joystick Module for Arduino Dimensions: 4 X 2.6 X 3.2CM2 potentiometers...

    Dual-axis XY Joystick Module for Arduino Dimensions: 4 X 2.6 X 3.2CM2 potentiometers for 2 axes1 switchConnector: +5Vcc - GND - VRx - VRy - SW

  • OV7670 300KP VGA CAMERA MODULE
    Available
    OV7670 300KP VGA CAMERA MODULE_A0063

    OV7670 image sensor, small size, low operating voltage, and provides all the features of the single-chip VGA camera and image processor. 

    OV7670 image sensor, small size, low operating voltage, and provides all the features...

    OV7670 image sensor, small size, low operating voltage, and provides all the features of the single-chip VGA camera and image processor. 

  • SD CARD READER MODULE
    Available
    SD CARD READER MODULE_A0039

    Features: Brand new and high quality. 1.SD Card module can make your SD application more easier and simple.

    Features: Brand new and high quality. 1.SD Card module can make your SD application...

    Features: Brand new and high quality. 1.SD Card module can make your SD application more easier and simple.

  • DS1307 I2C RTC 24C32 REAL TIME CLOCK MODULE_A0038
    Available
    DS1307 I2C RTC 24C32 REAL TIME CLOCK MODULE_A0038

    Description: 1.DS1307 I2C real-time clock chip (RTC).2.24c32 32k I2C EEPROM memory.3.The LIR2032 rechargeable lithium battery, and belt charging circuit.

    Description: 1.DS1307 I2C real-time clock chip (RTC).2.24c32 32k I2C EEPROM...

    Description: 1.DS1307 I2C real-time clock chip (RTC).2.24c32 32k I2C EEPROM memory.3.The LIR2032 rechargeable lithium battery, and belt charging circuit.

  • 28BYJ48 5V STEPPER MOTOR WITH ULN2003 DRIVER BOARD
    Available
    28BYJ48 5V STEPPER MOTOR WITH ULN2003 DRIVER BOARD_A0034

    Descriptio Signal Output function : Brand new and high quality.Voltage: 5V.Diameter: 28mm.

    Descriptio Signal Output function : Brand new and high quality.Voltage: 5V.Diameter:...

    Descriptio Signal Output function : Brand new and high quality.Voltage: 5V.Diameter: 28mm.