Categories

Specials

All specials

Best sellers

All best sellers

Arduino's Products There are 44 products.

Arduino's Products

Arduino can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators. The microcontroller on the board is programmed using the Arduino programming language (based on Wiring) and the Arduino development environment (based on Processing). Arduino projects can be stand-alone or they can communicate with software running on a computer (e.g. Flash, Processing, MaxMSP).

  • Out of stock
    Stepper Motor Arduino 3D Printer / CNC Shield V3 _A1182

    100% brand new and high qualityThis expansion board as a driver expansion board, can be used for engraving machines, 3D printers.It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.UNO for more detail given below

    100% brand new and high qualityThis expansion board as a driver expansion board, can be...

    100% brand new and high qualityThis expansion board as a driver expansion board, can be used for engraving machines, 3D printers.It is a total of four slots, can drive four...

    ₨ 550
    Add to cart View
  • Out of stock
    Seven Segment Digital Clock Display TM1637 I2C for Arduino etc. _A1170

    The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube.Display common anode for the four red LEDDigital tube 8 gray adjustableLevel control interface for 5V or 3.3VHow to Use it: http://www.instructables.com/id/4-Digit-Two-Wire-Display/

    The module is a 12 foot with a clock point four common anode tube (0.36 in.) display...

    The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver IC TM1637, only two signal lines can make the MCU control 4 8 digital...

    ₨ 190
    Add to cart View
  • Active Single Phase Voltage Transformer Module AC Output Voltage Sensor for Arduino Mega
    Available
    Wide Range AC Voltage Sensor Module _A1169

    Sensor : ZMPT101BOnboard precision miniature voltage transformerOnboard high-precision op amp circuits for signal sampling and adequate compensation to make precise functionsModules can be measured within the 250V AC voltage, the corresponding analog output can be adjustedPCB board size: 49.5 (mm) x19.4 (mm)Datasheet: http://www.zeming-e.com/file/0_2013_10_18_093344.pdf

    Sensor : ZMPT101BOnboard precision miniature voltage transformerOnboard high-precision...

    Sensor : ZMPT101BOnboard precision miniature voltage transformerOnboard high-precision op amp circuits for signal sampling and adequate compensation to make precise...

  • EMG-EKG-EEG SHIELD
    Out of stock
    EMG ECG Arduino Shield with Electrode Prob _A1114

    This is an ECG/EMG shield which allows Arduino like boards to capture Electrocardiography Electromiography signals. The shield opens new possibilities to experiment with bio feedback. You can monitor your heartbeat and log  Manual: https://www.olimex.com/Products/Duino/Shields/SHIELD-EKG-EMG/resources/SHIELD-EKG-EMG.pdf more detail given below

    This is an ECG/EMG shield which allows Arduino like boards to capture...

    This is an ECG/EMG shield which allows Arduino like boards to capture Electrocardiography Electromiography signals. The shield opens new possibilities to experiment with bio...

    ₨ 4,500
    Add to cart View
  •  Genuino Micro Development Board
    Available
    ATmega32U4 Genuino Micro Development Board (Original Made In Italy ) _A1041

    OverviewGenuino Micro is the smallest Genuino board to offer the full set of analog and digital pins. The Micro’s processor is as powerful as the Uno’s, but the small form factor allows embedding into tight spaces, invaluable  More detail given below

    OverviewGenuino Micro is the smallest Genuino board to offer the full set of analog and...

    OverviewGenuino Micro is the smallest Genuino board to offer the full set of analog and digital pins. The Micro’s processor is as powerful as the Uno’s, but the small form...

  • 2.8 inch TFT LCD Display Screen with Colorful Touch Screen Module 240X320 for Arduino
    Available
    2.8 inch 240X320 TFT LCD Display Screen Shield for Arduino _A1022

    LCD screen size:2.8 inchVisual angle: 120°LCD driver chip:ILI9325 Logic level:2.8V-3.3V Data interface:8 bi   ... more detail given below

    LCD screen size:2.8 inchVisual angle: 120°LCD driver chip:ILI9325 Logic level:2.8V-3.3V...

    LCD screen size:2.8 inchVisual angle: 120°LCD driver chip:ILI9325 Logic level:2.8V-3.3V Data interface:8 bi   ... more detail given below

  • Arduino Zero Pro M0 (Original Made in Italy) _ET002
    Out of stock
    Arduino Zero Pro M0 Pro - 32 bit Cortex M0 (Original Made in Italy) _A1000

    Microcontroller: ATSAMD21G18, 48pins LQFP Operating Voltage: 3.3V Digital I/O Pins: 14, with 12 PWM and UART Analog Input Pins: 6, 12-bit ADC channels Analog Output Pins: 1, 10-bit DAC DC Current per I/O Pin: 7 mA Flash Memory: 256 KB SRAM: 32 KB EEPROM: up to 16 KB by emulation Clock Speed: 48 MHz 53mm x 70mm x 14mm / 2.1" x 2.8" x 0.6" Weight: 22.4g

    Microcontroller: ATSAMD21G18, 48pins LQFP Operating Voltage: 3.3V Digital I/O Pins: 14,...

    Microcontroller: ATSAMD21G18, 48pins LQFP Operating Voltage: 3.3V Digital I/O Pins: 14, with 12 PWM and UART Analog Input Pins: 6, 12-bit ADC channels Analog Output Pins: 1,...

    ₨ 10,000
    Add to cart View
  • Nextion 5 inch Serial HMI TFT Touch Panel LCD _A0996
    Available
    Nextion 7" inch Serial HMI TFT Touch Panel LCD Display _A0997

    Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less...detail below

    Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control...

    Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or...

    ₨ 16,000
    Add to cart View
  • Nextion 5 inch Serial HMI TFT Touch Panel LCD _A0996
    Available
    Nextion 5 inch Serial HMI TFT Touch Panel LCD _A0996

    Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less...detail below

    Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control...

    Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or...

    ₨ 12,500
    Add to cart View
  • Digispark - The tiny, Arduino enabled, usb dev board! Attiny85 _
    Out of stock
    Digispark - The tiny, Arduino enabled, usb dev board! Attiny85 _A0891

    The micro-sized, Arduino enabled, usb development board - cheap enough to leave in any project! Digispark is an ATtiny85 based microcontroller development board come with USB interface. Coding is similar to Arduino, and it use the familiar Arduino IDE for development...detail given below

    The micro-sized, Arduino enabled, usb development board - cheap enough to leave in any...

    The micro-sized, Arduino enabled, usb development board - cheap enough to leave in any project! Digispark is an ATtiny85 based microcontroller development board come with USB...

    ₨ 600
    Add to cart View
  • Dccduino (Arduino Compatible) UNO with usb cable _A0806
    Available
    Dccduino (Arduino Compatible) UNO with usb cable _A0806

    The DCcduino Uno is a micro-controller board based on the ATmega328 and USB CH340 Serial Converter.These Chinese Uno R3 CH340 board differs from Italian Arduino UNO R3 boards in that it does not use the expensive FTDI USB-to-serial driver chip. Instead, it features the CH340 USB-to-serial converter chip which makes it low cost and 100% Arduino UNO R3 compatible board.... detail below

    The DCcduino Uno is a micro-controller board based on the ATmega328 and USB CH340...

    The DCcduino Uno is a micro-controller board based on the ATmega328 and USB CH340 Serial Converter.These Chinese Uno R3 CH340 board differs from Italian Arduino UNO R3 boards in...

  • 30A Dual H-bridge Monster Moto Shield VNH2SP30 _A0890
    Available
    30A Dual H-bridge Monster Moto Shield VNH2SP30 _A0890

    Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown  ... detail below

    Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A...

    Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum...

  • Arduino USB-SD MP3 Shield _A0807
    Available
    Arduino USB-SD MP3 Shield _A0807

    This shield is more powerful and flexible. It supports both wave and mp3 format. Both SD card and U-disk are supported directly. Also there is an on-board 64Mbit flash which could store music files.There is a standard 3.5mm headset jacket on the shield. You could connect with a standard earphone. We also integrate an audio amplifier on the shield. You could ...more detail below

    This shield is more powerful and flexible. It supports both wave and mp3 format. Both...

    This shield is more powerful and flexible. It supports both wave and mp3 format. Both SD card and U-disk are supported directly. Also there is an on-board 64Mbit flash which...

  • Ultimate 37 in 1 Sensor Modules Kit for Arduino & MCU _A0841
    Available
    Ultimate 37 in 1 Sensor Modules Kit for Arduino & MCU _A0841

    37 different modules for Arduino Compatible (list is given below) Best kit for learning Arduino Material: Circuit board Package Dimensions: 273*190*43mm Weight: 431g

    37 different modules for Arduino Compatible (list is given below) Best kit for learning...

    37 different modules for Arduino Compatible (list is given below) Best kit for learning Arduino Material: Circuit board Package Dimensions: 273*190*43mm Weight: 431g

  • 2.2 Inch Serial TFT SPI LCD Screen Module HD 240 x 320 5110 Compatible _A0769
    Out of stock
    2.2 Inch Serial TFT SPI LCD Screen Module HD 240 x 320 5110 Compatible _A0769

    Driver IC: ILI9340CDisplay size: 2.2 inchOn-board SD cardWith regulator IC support 5V / 3.3VResolution: 240 x 320(RGB)Interface: 4-Wire SPI(supports hardware SPI)Color depth: 262K / 65KActive area: 33.84 x 45.12mmSize: 40.10 x 55.20 x 2.35mm(W x H x D)

    Driver IC: ILI9340CDisplay size: 2.2 inchOn-board SD cardWith regulator IC support 5V /...

    Driver IC: ILI9340CDisplay size: 2.2 inchOn-board SD cardWith regulator IC support 5V / 3.3VResolution: 240 x 320(RGB)Interface: 4-Wire SPI(supports hardware SPI)Color depth:...

    ₨ 800
    Add to cart View
  • Arduino Nano V3.0  (Economy) _A0670
    Available
    Arduino Nano V3.0 (Economy) _A0670

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. In the Arduino Nano V3.0 (Economy) it use CP2102 USB to TTL chip Instead of FTDI. ... more detail given below

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the...

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328. It has more or less the same functionality of the Arduino Duemilanove, but in a...

  • SparkFun I2C/SPI-to-UART Breakout - SC16IS750
    Available
    SparkFun I2C/SPI-to-UART Breakout - SC16IS750

    Description: This is a breakout board for the SC16IS750, a handy chip used to convert I2C or SPI serial signals to a single-channel, high-performance UART. As an application example: we use this chip on ourWiFly Shield to allow an Arduino to communicate with the WiFly RN-131G module - which is normally controlled via a UART - using an SPI interface. This allows....more detial given below

    Description: This is a breakout board for the SC16IS750, a handy chip used to convert...

    Description: This is a breakout board for the SC16IS750, a handy chip used to convert I2C or SPI serial signals to a single-channel, high-performance UART. As an application...

  • FLiR Dev Kit (FliR Thermal Imaging Camera )
    Available
    FLiR Dev Kit (FLiR Thermal Imaging Camera )

    Description: The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to be able to bring FLiR’s thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. All you need to do to get this kit set up, ... more detail given below

    Description: The FLiR Dev Kit includes a breakout as well as a Lepton® longwave...

    Description: The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to be able to bring FLiR’s thermal imaging...

    ₨ 67,000
    Add to cart View
  • CAN-BUS Arduino Shield _A0631
    Out of stock
    CAN-BUS Arduino Shield _A0631

    Description: This shield gives the Arduino CAN-Bus capability. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBD-II cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM406 GPS module....more detail given below

    Description: This shield gives the Arduino CAN-Bus capability. It uses the Microchip...

    Description: This shield gives the Arduino CAN-Bus capability. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connection is via a standard 9-way...

    ₨ 3,500
    Add to cart View
  • Flex Sensor 2.2"
    Out of stock
    Flex Sensor 2.2"

    The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the ...more detail  given below

    The resistance of the flex sensor changes when the metal pads are on the outside of the...

    The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). A simple flex sensor 2.2" in length. As the sensor is...

    ₨ 1,100
    Add to cart View
  • Mindwave Sesnor Device NeuroSky Mindwave Mobile
    Out of stock
    Brain Wave Sesnor Device NeuroSky Mindwave Mobile

    Description: This is the Mindwave Mobile from NeuroSky, an EEGheadset that safely measures and transfers the power spectrum (alpha waves, beta waves, etc) data via Bluetooth to wirelessly communicate with your computer, iOS, or Android device. This headset can be simply slipped on to be able to see your brainwaves change in real time. With the Mindwave Mobile....more detail given below

    Description: This is the Mindwave Mobile from NeuroSky, an EEGheadset that safely...

    Description: This is the Mindwave Mobile from NeuroSky, an EEGheadset that safely measures and transfers the power spectrum (alpha waves, beta waves, etc) data via Bluetooth to...

    ₨ 22,500
    Add to cart View
  • Text-to-Speech Module - Emic 2
    Available
    Text-to-Speech Module - Emic 2

    Description: Ever wish your project could just speak up and tell you what’s going on? Why not give it a voice? The Emic-2 Text-to-Speech module makes it really easy to give voice to your embedded projects. The Emic-2 was designed by Parallax in conjunction with Grand Idea Studio to make voice synthesis a total no-brainer. Simply connect the Emic-2 to a 5VDC power....more detail given below

    Description: Ever wish your project could just speak up and tell you what’s going on?...

    Description: Ever wish your project could just speak up and tell you what’s going on? Why not give it a voice? The Emic-2 Text-to-Speech module makes it really easy to give...

    Reduced price! ₨ 10,200
    Add to cart View
  • Transparent Acrylic Box For Arduino UNO _A0527
    Available
    Transparent Acrylic Box For Arduino UNO _A0527

    Transparent Acrylic Shell Box For Arduino UNO R3 BoardFeature:With EN instructions.Weight: 53gDimensions: 79.5 x 64.5 x 21mmMaterial: A grade acrylic sheetFor Arduino UNO R3 Development Board onlyNote: The UNO R3 is not included.

    Transparent Acrylic Shell Box For Arduino UNO R3 BoardFeature:With EN...

    Transparent Acrylic Shell Box For Arduino UNO R3 BoardFeature:With EN instructions.Weight: 53gDimensions: 79.5 x 64.5 x 21mmMaterial: A grade acrylic sheetFor Arduino UNO R3...

  • Ardumoto - Motor Driver Shield _A0522
    Available
    Ardumoto - Motor Driver Shield _A0522

    Description: This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the SparkFun Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF...more detail given below

    Description: This is a motor shield for Arduino that will control two DC motors. Based...

    Description: This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the SparkFun Ardumoto can drive up to 2 amps per channel. The board...

  • Arduino Pro Mini 328 - 3.3V/8MHz_A0505
    Available
    Arduino Pro Mini 328 - 3.3V/8MHz_A0505

    You need to wedge an Arduino into a really tiny spot? Simple - just use a SMD '328 IC. Oh... you want a reset, and voltage regulator too? Why didn't you say so!Try this - the super-flat SparkFun Arduino Pro Mini, featuring a ATMega328 at 8MHz on 3.3V. Mind you, there's no headers and USB interface - you have to wire it up yourself, and ....detail given below

    You need to wedge an Arduino into a really tiny spot? Simple - just use a SMD '328 IC....

    You need to wedge an Arduino into a really tiny spot? Simple - just use a SMD '328 IC. Oh... you want a reset, and voltage regulator too? Why didn't you say so!Try this - the...

  • Arduino Electronics Blocks Kit for beginners _A0417
    Available
    Arduino Electronics Blocks Kit for beginners _A0417

    Kit Contents:uno r3 * 1usb cable * 13p sensor cable * 101 * 40 pin 1 piranhas sensor * 1 straw hat LED module * 1 Key sensor * 1 Ball sensor * 1   ..........More detail given below 

    Kit Contents:uno r3 * 1usb cable * 13p sensor cable * 101 * 40 pin 1 piranhas sensor *...

    Kit Contents:uno r3 * 1usb cable * 13p sensor cable * 101 * 40 pin 1 piranhas sensor * 1 straw hat LED module * 1 Key sensor * 1 Ball sensor * 1   ..........More detail given...

  • DIY Arduino Mega2560 basic kit for beginners _A0416
    Available
    DIY Arduino Mega2560 basic kit for beginners _A0416

    package:1.component box*12. MEGA 2560 R3 *13.MYB-120 breadboard*14.red/blue/yellow LED lighting*55.resistor 200 ohm *8 , 1K*5 , 10K* 5.6.wires*307.USB cable*18.potentionmeter*19.digital tube*110.source buzz*111.non-source buzz*112.button*413.photoreponse *214.Tilt switch*215.flame sensor*1

    package:1.component box*12. MEGA 2560 R3 *13.MYB-120 breadboard*14.red/blue/yellow LED...

    package:1.component box*12. MEGA 2560 R3 *13.MYB-120 breadboard*14.red/blue/yellow LED lighting*55.resistor 200 ohm *8 , 1K*5 , 10K* 5.6.wires*307.USB...

  • A Basic Learning kit for Arduino _A0414
    Available
    A Basic Learning kit for Arduino _A0414

    1 x UNO1 x breakboard5 x Red LED5 x Yellow LED5 x Green LED8 x 220 Ohm5 x 1K Resistor5 x 10K Resistor1 x Active buzzer1 x Passive buzzer4 x Button switch2 x Digital tube1 x 6 AA Battery holder1 x 4 Digital tube2 x Ball switch3 x Photoresistor1 x Adjustable resistance1 x Flame sensor1 x Infrared receiver1 x LM35 sensor1 x 74H5951 x 8*8 Matrix1 x USB cable30 x breakboard cable1 x Mini remote control

    1 x UNO1 x breakboard5 x Red LED5 x Yellow LED5 x Green LED8 x 220 Ohm5 x 1K Resistor5...

    1 x UNO1 x breakboard5 x Red LED5 x Yellow LED5 x Green LED8 x 220 Ohm5 x 1K Resistor5 x 10K Resistor1 x Active buzzer1 x Passive buzzer4 x Button switch2 x Digital tube1 x 6 AA...

  • Analog Display Arduino Kit _A0413
    Available
    Analog Display Arduino Kit _A0413

    Package Included:UNO R3 board*1I2C1602 LCD*1Acrylic plate*1Mini Breadboard*1Ultrasonic sensors*1XY joystick module*1Soil moisture sensor*1Water level sensor*1Temp and humidity sensor*1Smoke sensor*1LM35 temp sensor*1Sound Sensor*1Triaxial accelerometer*1Light sensor*1DuPont line*103PIN sensor wire*5Pin*1USB cable*1Plastic box*1

    Package Included:UNO R3 board*1I2C1602 LCD*1Acrylic plate*1Mini Breadboard*1Ultrasonic...

    Package Included:UNO R3 board*1I2C1602 LCD*1Acrylic plate*1Mini Breadboard*1Ultrasonic sensors*1XY joystick module*1Soil moisture sensor*1Water level sensor*1Temp and humidity...

  • Arduino UNO Basic Starter Kit _A0412
    Out of stock
    Arduino UNO Basic Starter Kit _A0412

    This Starter Kit is based on UNO's R3 development board. It includes the most basic component, such as bread board, breadboard wires, LED lights, resistance. Package included:1 x Components storage1 x UNO R31 x Breadboard15 x LED (3 x Red, 3 x Blue, 3 x Yellow)8 x Resistance (200 Ohm)30 x Colorful breadboard wire1 x USB cable

    This Starter Kit is based on UNO's R3 development board. It includes the most basic...

    This Starter Kit is based on UNO's R3 development board. It includes the most basic component, such as bread board, breadboard wires, LED lights, resistance. Package included:1...

    ₨ 1,800
    Add to cart View
  • On sale!
    Speech/Voice Recognition Module V3 (latest version)
    Available
    Speech/Voice Recognition Module V3 (latest version) _ A0343

    Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking) Maximum 7 voice commands effective at same time Arduino library is supplied Easy Control: UART/GPIO User-control General Pin Output  ... more detail given below

    Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking)...

    Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking) Maximum 7 voice commands effective at same time Arduino library is supplied Easy Control:...

    Reduced price! ₨ 2,950
    Add to cart View
  • Plugin Play TFT Mega Shield _ A0310
    Available
    Plugin Play TFT Mega Shield _ A0310

    The TFT LCDs module works in 3.3V voltage level and it's not compatible with Arduino MGEA pins , this us a shield for Arduino MEGA. Now user can directly plug the TFT LCD in the shield and stand on the Arduino MEGA board. This shield support both 3.3V supply voltage and 5V, so it not just can be used with Arduino MEGA but can with other Arduino MEGA compatible Arduino Boards.

    The TFT LCDs module works in 3.3V voltage level and it's not compatible with Arduino...

    The TFT LCDs module works in 3.3V voltage level and it's not compatible with Arduino MGEA pins , this us a shield for Arduino MEGA. Now user can directly plug the TFT LCD in the...

  • Arduino Leonardo R3
    Available
    Arduino Leonardo R3_A0273

    The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board.

    The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB...

    The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to...

  • Power Supply Adapter for Arduino (9v 1A)
    Out of stock
    Power Supply Adapter for Arduino (9v 1A)_A0266

    If you have attached many sensors or motors and your arduino is not cable to take the current  from the USB port of your PC or you are going to power-up your arduino without USB port then you would need to use this adapter . The specification is given below.Input: 100V - 240V AC, 50 - 60 Hz 0.5AOutput: 9V DC 1000mAWeight: 121gPlug: US plug 

    If you have attached many sensors or motors and your arduino is not cable to take the...

    If you have attached many sensors or motors and your arduino is not cable to take the current  from the USB port of your PC or you are going to power-up your arduino without USB...

    ₨ 150
    Add to cart View
  • PROTOSHIELD V3 + MINI PROTOBOARD FOR ARDUINO MEGA
    Available
    PROTOSHIELD V3 + MINI PROTOBOARD FOR ARDUINO MEGA_A0262

    MEGA ProtoShield V3 Prototype Shield Gold PCB processing technology, motherboards, small gold square pad spacing, welding components easier. SOP28 SMD component package to be more handy electronics enthusiasts will not be directly insert bound components. 

    MEGA ProtoShield V3 Prototype Shield Gold PCB processing technology, motherboards,...

    MEGA ProtoShield V3 Prototype Shield Gold PCB processing technology, motherboards, small gold square pad spacing, welding components easier. SOP28 SMD component package to be...

  • PROTOSHIELD + MINI PROTOBOARD FOR ARDUINO UNO
    Available
    PROTOSHIELD + MINI PROTOBOARD FOR ARDUINO UNO_A0261

    100% brand new and high quality Arduino protoshield prototype with 170 mini breadboard. 1 reset button, 1 general use button, and 2 LED circuits can be used directly. The mini breadboard has 170 tie points.

    100% brand new and high quality Arduino protoshield prototype with 170 mini...

    100% brand new and high quality Arduino protoshield prototype with 170 mini breadboard. 1 reset button, 1 general use button, and 2 LED circuits can be used directly. The mini...

  • GPS ARDUINO SHIELD WITH SD CARD
    Available
    GPS ARDUINO SHIELD WITH SD CARD_A0234

    Arduino GPS shield is a GPS module breakout board for Arduino. It can make your Arduino as a GPS receiver with SD storage, it is easy to use for recording the position data into SD card by Arduino

    Arduino GPS shield is a GPS module breakout board for Arduino. It can make your Arduino...

    Arduino GPS shield is a GPS module breakout board for Arduino. It can make your Arduino as a GPS receiver with SD storage, it is easy to use for recording the position data into...

  • CC3000 WIFI ARDUINO SHIELD_A0177
    Out of stock
    CC3000 WIFI ARDUINO SHIELD_A0177

    CC3000 is a fully-equipped wireless network processor, which simplifies the execution of Internet connectivity . SIMPLELINK WIFI can greatly reduce the host microcontroller (MCU) software requirements , making use of any low-cost and low- power MCU embedded applications can be the ideal solution

    CC3000 is a fully-equipped wireless network processor, which simplifies the execution...

    CC3000 is a fully-equipped wireless network processor, which simplifies the execution of Internet connectivity . SIMPLELINK WIFI can greatly reduce the host microcontroller...

    ₨ 5,300
    Add to cart View
  • SD, SDHC,MICRO SD, SHIELD /EXPANSION BOARD FOR ARDUINO_A0152
    Available
    TF SD Card Arduino shield_A0152

    This SD card shield is a standard SD card / TF card break out board for Arduino. The SD card shield adds storage to your Arduino project. It supports SD, SDHC, or Micro SD/TF cards. It just uses the SPI ports of Arduino, and you can plug more other shield on it. Arduino compatible SD card, Micro SD card and SDHC card supportable Prototype expand Arduino Library support more detail given below

    This SD card shield is a standard SD card / TF card break out board for Arduino. The SD...

    This SD card shield is a standard SD card / TF card break out board for Arduino. The SD card shield adds storage to your Arduino project. It supports SD, SDHC, or Micro SD/TF...

  • ARDUINO IO EXPANSION SHIELD (V5) SUPPORTS XBEE,SD CARD, RS485, PWM
    Available
    ARDUINO IO EXPANSION SHIELD (V5) SUPPORTS XBEE,SD CARD, RS485, PWM_A0131

    Description:   Extended 14 digital IO ports (12 Servo Interface) and power; 6 analog IO ports and power;

    Description:   Extended 14 digital IO ports (12 Servo Interface) and power; 6 analog IO...

    Description:   Extended 14 digital IO ports (12 Servo Interface) and power; 6 analog IO ports and power;

  • USB HOST SHIELD REVISION 2.0
    Available
    USB HOST SHIELD REVISION 2.0_A0127

    USB Host Shield is an inexpensive development board designed to be used in embedded applications which require USB Host functionality.

    USB Host Shield is an inexpensive development board designed to be used in embedded...

    USB Host Shield is an inexpensive development board designed to be used in embedded applications which require USB Host functionality.

  • ARDUINO ETHERNET SHIELD W5100
    Available
    Arduino Ethernet Shield W5100 _A0006

    This is a Ethernet shield based on the Wiznet W5100 ethernet chip,compatible with Arduino Ethernet Shield,added support to Arduino Mega. The different between with Arduino Ethernet Shield just Layout of Ethernet port location

    This is a Ethernet shield based on the Wiznet W5100 ethernet chip,compatible with...

    This is a Ethernet shield based on the Wiznet W5100 ethernet chip,compatible with Arduino Ethernet Shield,added support to Arduino Mega. The different between with Arduino...

  • ARDUINO EDUCATION STATER KIT
    Available
    ARDUINO EDUCATION STATER KIT_A0182

    Arduino Starter Kit ,RFID and UNO R3 Base

    Arduino Starter Kit ,RFID and UNO R3 Base

    Arduino Starter Kit ,RFID and UNO R3 Base