Categories

Specials

All specials

Best sellers

All best sellers

Stepper & DC Gear Motors There are 23 products.

Stepper & DC Gear Motors
  • Available
    110KG Highest Torque Metal Gear Motor With Driver Board _A1103

    Operating voltage: 12V to 24V (DC)No-load rotational current: <500mAMaximum torque: 110kg.cm (24V) (measured, non-theoretical value)Angular velocity: 0.12s / 60 [deg.] (60 degrees of rotation required 0.12s), 24V time;                         0.24 S / 60 [deg.] (60 degrees of rotation required 0.24s), while 12V;... More detail given below

    Operating voltage: 12V to 24V (DC)No-load rotational current: <500mAMaximum torque:...

    Operating voltage: 12V to 24V (DC)No-load rotational current: <500mAMaximum torque: 110kg.cm (24V) (measured, non-theoretical value)Angular velocity: 0.12s / 60 [deg.] (60...

  • 130 Motor
    Available
    DC Motor simple toy _A1094

    Motor Specification: 15 * 20 MM Motor height: 25 MM Output shaft: 2.0 MM Output shaft length: 7.5 MM Rated voltage: 3V 3V: 16500 turn   -load current of about 350MA, Stall Current 1.3A Single Weight: about 15g Model: 130

    Motor Specification: 15 * 20 MM Motor height: 25 MM Output shaft: 2.0 MM Output shaft...

    Motor Specification: 15 * 20 MM Motor height: 25 MM Output shaft: 2.0 MM Output shaft length: 7.5 MM Rated voltage: 3V 3V: 16500 turn   -load current of about 350MA, Stall...

  • 3v-8v TT Gear Motor for Smart Car Robot_A0027
    Available
    3V-8V TT Gear Motor for Smart Car Robot_A0027

    Operating voltage: 3V ~ 12V DC (recommended working voltage of about 6 to 8V) Maximum torque: 800gf cm min (3V time) No-load speed: 1:48 (3V time) Load Current: 70mA (250mA MAX) (3V time) This motor plus EMC, anti-interference ability. Microcontroller without interference Package Included: 1 X TT motor

    Operating voltage: 3V ~ 12V DC (recommended working voltage of about 6 to 8V) Maximum...

    Operating voltage: 3V ~ 12V DC (recommended working voltage of about 6 to 8V) Maximum torque: 800gf cm min (3V time) No-load speed: 1:48 (3V time) Load Current: 70mA (250mA MAX)...

  • 12V Linear Motor / Actuator 12inch Stroke (300mm) _ET001
    Available
    12V Linear Motor / Actuator 12inch Stroke (300mm) _A1001

    Specification:Material: Aluminum alloyColor: SilverRated Voltage: DC 12VStroke Length: 300mm/12inchLoad capacity: 500NSpeed: 20mm/sDuty cycle: 20%Net weight: 1100g

    Specification:Material: Aluminum alloyColor: SilverRated Voltage: DC 12VStroke Length:...

    Specification:Material: Aluminum alloyColor: SilverRated Voltage: DC 12VStroke Length: 300mm/12inchLoad capacity: 500NSpeed: 20mm/sDuty cycle: 20%Net weight: 1100g

  • CNC Router Single 1 Axis Controller Stepper Motor Driver TB6560 3A Driver Board _A0990
    Available
    CNC Router Single 1 Axis Controller Stepper Motor Driver TB6560 3A Driver Board _A0990

    Description:Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx)Rated maximum output: ± 3A, peak 3.5A.Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply.Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance...more detail given below

    Description:Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx)Rated maximum...

    Description:Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx)Rated maximum output: ± 3A, peak 3.5A.Working voltage DC 10V-35V. Recommended to use a switching power supply...

  • Out of stock
    30A Single H-Bridge VNH2SP30-Monster Driver Module _A0892

    This is essentially a ramped up version of Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so thi... detail given below 

    This is essentially a ramped up version of Ardumoto motor driver shield. For this...

    This is essentially a ramped up version of Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor...

    ₨ 800
    Add to cart View
  • 30A Dual H-bridge Monster Moto Shield VNH2SP30 _A0890
    Out of stock
    30A Dual H-bridge Monster Moto Shield VNH2SP30 _A0890

    Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown  ... detail below

    Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A...

    Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum...

    ₨ 950
    Add to cart View
  • 3V~12V DC Gear Motor
    Available
    6V 60rpm DC Gear Motor _A0287

    DC electric gear motorVoltage: DC 6VRPM:6V : 60rpm/min 60mA~180mA torque: 0.5 ~ 3KGWeight: 31g

    DC electric gear motorVoltage: DC 6VRPM:6V : 60rpm/min 60mA~180mA torque: 0.5 ~...

    DC electric gear motorVoltage: DC 6VRPM:6V : 60rpm/min 60mA~180mA torque: 0.5 ~ 3KGWeight: 31g

  • 50A Dual Channel Motor Drive Module _A0627
    Out of stock
    50A Dual Channel Motor Drive Module _A0627

    This motor driver works with single channel max 50A load capacity. This module performs far better than MC33886 or L298 motor driver, especially in terms of motor speed control and power efficiency....more detail given below

    This motor driver works with single channel max 50A load capacity. This module performs...

    This motor driver works with single channel max 50A load capacity. This module performs far better than MC33886 or L298 motor driver, especially in terms of motor speed control...

    ₨ 4,950
    Add to cart View
  • 5A Integrated 3Axis CNC TB6600 +Intelligent Handle Keyboard+ LCD Digital Display with controller _A0450
    Available
    5A Integrated 3Axis CNC TB6600 +Intelligent Handle Keyboard+ LCD Digital Display with controller _A0450

    Detail given below....

    Detail given below....

    Detail given below....

    ₨ 19,500
    Add to cart View
  • 5A Integrated 3Axis CNC TB6600 Stepping Driver Box Set,_A0449
    Available
    5A Integrated 3 Axis CNC TB6600 Stepper Driver w/ Controller, LCD and Keypad Box Set,_A0449

    Comparing with the previous 3rd generation TB6560AHQ Stepper Driver, besides including all the functions that the 3rd generation TB6560AHQ Stepper Driver has, this newly released 3rd generation TB6600HG Stepper Driver was specially developed for bigger stepper motors which have higher current. As long as the current range of the stepper motors is within 0.2-5.0 amps.more detail given below

    Comparing with the previous 3rd generation TB6560AHQ Stepper Driver, besides including...

    Comparing with the previous 3rd generation TB6560AHQ Stepper Driver, besides including all the functions that the 3rd generation TB6560AHQ Stepper Driver has, this newly...

    ₨ 19,500
    Add to cart View
  • A4988 StepStick Stepper Motor Driver Module (35V, 2A) with heat-sink _A0438
    Available
    A4988 StepStick Stepper Motor Driver Module (35V, 2A) with heat-sink _A0438

    A4988 is a complete microstepping motor driver with built-in translator for easy operation. The product can be full, half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper motor output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can slow or mixed decay mode...More detail given below.

    A4988 is a complete microstepping motor driver with built-in translator for easy...

    A4988 is a complete microstepping motor driver with built-in translator for easy operation. The product can be full, half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper...

  • ULN2003 Driver Board_A0398
    Available
    ULN2003 Driver Board_A0398

    A, B, C, D four-phase LED indicates the status of the stepper motor work.Stepper motor with a standard interface, when used directly pluggable.Drive Module Board Size:2.8cm x 2.8cm x 2cm - 1.1inch x 1.1inch x 0.79inch. 

    A, B, C, D four-phase LED indicates the status of the stepper motor work.Stepper motor...

    A, B, C, D four-phase LED indicates the status of the stepper motor work.Stepper motor with a standard interface, when used directly pluggable.Drive Module Board Size:2.8cm x...

  • 28BYJ48 5V Stepper Motor_ A0397
    Available
    28BYJ48 5V Stepper Motor_ A0397

      Signal Output function :Brand new and high quality.Voltage: 5V.Diameter: 28mm.Step angle: 5.625 x 1 / 64.Reduction ratio: 1 / 64.5 Line 4 phase can be driven by ordinary uln2003 chip can also be connected in phase 2 development board used for.supporting the use of a direct plug and easy to use stepper motor used in the development board.Dimensions of the Board : 31mm x 35mm.

      Signal Output function :Brand new and high quality.Voltage: 5V.Diameter: 28mm.Step...

      Signal Output function :Brand new and high quality.Voltage: 5V.Diameter: 28mm.Step angle: 5.625 x 1 / 64.Reduction ratio: 1 / 64.5 Line 4 phase can be driven by ordinary...

  • 4 Axis CNC Controller TA8435H Stepper Motor Driver Board Mach 2 3 For CNC Machine
    Available
    4 Axis CNC Controller TA8435H Stepper Motor Driver Board Mach 2 3 For CNC Machine _A0445

    Toshiba TA8435H chip - maximum 2.5A drive current ! 1 - 1/8 microstep setting Chip 555 adapts the SOP( SURFACE MOUNT) In application of the SMT solder-reflow technic. Add the 24V and 5V indication LED light Use the DCDC as the isolation of the front and the en Document Download: https://drive.google.com/drive/folders/0B4FTB8_CQRXMaDQtTXItdE9MdVk?usp=sharing

    Toshiba TA8435H chip - maximum 2.5A drive current ! 1 - 1/8 microstep setting Chip 555...

    Toshiba TA8435H chip - maximum 2.5A drive current ! 1 - 1/8 microstep setting Chip 555 adapts the SOP( SURFACE MOUNT) In application of the SMT solder-reflow technic. Add the...

  • Dual H-Bridge Motor Driver Module (L298)
    Available
    Dual H-Bridge Motor Driver Module (L298)_A0023

    This dual bidirectional motor driver is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently control two motors of up to 2A each in both directions. It is ideal for robotic applications and well suited for connection to a microcontroller requiring just a couple of control lines per motor.

    This dual bidirectional motor driver is based on the very popular L298 Dual H-Bridge...

    This dual bidirectional motor driver is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently...

  • 6V 60RPM Mini DC Gear Motor
    Available
    6V 60RPM Mini DC Gear Motor _A0288

    Electronic Components OPERATING VOLTAGE 6 -volt Specifications RPM (RATED MAXIMUM) 60~100 rpm TORQUE, EFFECTIVE 1.1 kg/cm Manufacturer BRAND GUOLING MODEL                                GA12YN20 PACKAGE TYPE OEM Dimensions DEPTH 10 mm HEIGHT 24.3 mm WIDTH 12.1 mm PRODUCT WEIGHT 9.5 g

    Electronic Components OPERATING VOLTAGE 6 -volt Specifications RPM (RATED MAXIMUM)...

    Electronic Components OPERATING VOLTAGE 6 -volt Specifications RPM (RATED MAXIMUM) 60~100 rpm TORQUE, EFFECTIVE 1.1 kg/cm Manufacturer BRAND GUOLING MODEL...

  • 3V~12V DC Gear Motor
    Available
    6V 10rpm DC Gear Motor _A0287

    DC electric gear motorVoltage: DC 6VRPM:6V : 10rpm/min 60mA~180mA torque: 0.5 ~ 3KGWeight: 31g

    DC electric gear motorVoltage: DC 6VRPM:6V : 10rpm/min 60mA~180mA torque: 0.5 ~...

    DC electric gear motorVoltage: DC 6VRPM:6V : 10rpm/min 60mA~180mA torque: 0.5 ~ 3KGWeight: 31g

  • DC Gear Motor (1.5V-9V , 15rpm-90rpm)
    Available
    DC Gear Motor (1.5V-9V , 15rpm-90rpm) _A0282

    [Voltage] 1.5V-9V voltage [Speed] 15-90 rev / min

    [Voltage] 1.5V-9V voltage [Speed] 15-90 rev / min

    [Voltage] 1.5V-9V voltage [Speed] 15-90 rev / min

  • 360-DEGREE CONTINUOUS ROTATION SERVO
    Available
    360-DEGREE CONTINUOUS ROTATION SERVO 240

    As long as the input signal end of a50HZ square wave signals, and then the cycle of the control signal of high level pulse duration can control the speed and reverse and stop. A high pulse duration corresponding to a speed. 

    As long as the input signal end of a50HZ square wave signals, and then the cycle of the...

    As long as the input signal end of a50HZ square wave signals, and then the cycle of the control signal of high level pulse duration can control the speed and reverse and stop. A...

  • DC GEAR MOTOR + WHEEL (SET)
    Available
    DC GEAR MOTOR + WHEEL (SET)_A0083

    Motor: Gear Motor (1:48)Voltage:  DC 3V, DC 5V, DC 6VCurrent: 100 MA, 100MA, 120MAReduction rate: 48:1RPM (With tire): 100, 190, 240Tire Diameter: 66mmCar Speed(M/minute): 20, 39, 48

    Motor: Gear Motor (1:48)Voltage:  DC 3V, DC 5V, DC 6VCurrent: 100 MA, 100MA,...

    Motor: Gear Motor (1:48)Voltage:  DC 3V, DC 5V, DC 6VCurrent: 100 MA, 100MA, 120MAReduction rate: 48:1RPM (With tire): 100, 190, 240Tire Diameter: 66mmCar Speed(M/minute): 20,...

  • 28BYJ48 5V STEPPER MOTOR WITH ULN2003 DRIVER BOARD
    Available
    28BYJ48 5V STEPPER MOTOR WITH ULN2003 DRIVER BOARD_A0034

    Descriptio Signal Output function : Brand new and high quality.Voltage: 5V.Diameter: 28mm.

    Descriptio Signal Output function : Brand new and high quality.Voltage: 5V.Diameter:...

    Descriptio Signal Output function : Brand new and high quality.Voltage: 5V.Diameter: 28mm.

  • ARDUINO STEPPER MOTOR/SERVO/DC MOTOR SHEILD
    Out of stock
    ARDUINO STEPPER MOTOR/SERVO/DC MOTOR SHEILD_A0033

    Arduino is a great starting point for electronics, and with a motor shield it can also be a nice tidy platform for robotics and mechatronics. Here is a design for a full-featured motor shield that will be able to power many simple to medium-complexity projects.

    Arduino is a great starting point for electronics, and with a motor shield it can also...

    Arduino is a great starting point for electronics, and with a motor shield it can also be a nice tidy platform for robotics and mechatronics. Here is a design for a...

    ₨ 350
    Add to cart View