Categories

Specials

All specials

Best sellers

All best sellers

Other There are 46 products.

  • New!
    Available
    Educational BoosterPack MKII - BOOSTXL-EDUMKII - TI _A01326

    The Educational BoosterPack MKII offers a high level of integration for developers to quickly prototype complete solutions. Various analog and digital inputs/outputs are at your disposal including an analog joystick, environmental and motion sensors, RGB LED, microphone, buzz.... Technical Documents : http://www.ti.com/tool/boostxl-edumkii#Technical Documents more detail given below

    The Educational BoosterPack MKII offers a high level of integration for developers to...

    The Educational BoosterPack MKII offers a high level of integration for developers to quickly prototype complete solutions. Various analog and digital inputs/outputs are at your...

    ₨ 12,800
    Add to cart View
  • JY-MCU 3208 Lattice Clock Dot Matrix Clock HT1632C Driver MCU Support Secondary Development
    Available
    JY-MCU 3208 Lattice Dot Matrix Clock HT1632C Driver With MCU _A1313

    Description:The module ASIC driver HT1632C lattice, without requiring an MCU scan, do not take MCU resources, 16 adjustable brightness, saving three IO lines / four-wire interface module is reserved for a ATMEGA8 microcontroller, AVR USB, mini USB Chip Block, buzzer, 18B20 temperature sensor, LED metering port, infrared more detail given below

    Description:The module ASIC driver HT1632C lattice, without requiring an MCU scan, do...

    Description:The module ASIC driver HT1632C lattice, without requiring an MCU scan, do not take MCU resources, 16 adjustable brightness, saving three IO lines / four-wire...

  • DS3231 AT24C32 IIC module precision Real time clock module memory module Arduino
    Available
    RTC DS3231IIC Module Precision Real Time Clock Module with Battery _A1314

    Wiring instructions (with Arduino uno r3 for example):SCL → A5SDA → A4VCC → 5VGND → GND Size: 38mm (length) * 22mm (W) * 14mm (height)Operating voltage :3.3 - 5 .5 VClock chip: high-precision clock chip DS3231Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute more detail given below

    Wiring instructions (with Arduino uno r3 for example):SCL → A5SDA → A4VCC → 5VGND →...

    Wiring instructions (with Arduino uno r3 for example):SCL → A5SDA → A4VCC → 5VGND → GND Size: 38mm (length) * 22mm (W) * 14mm (height)Operating voltage :3.3 - 5 .5 VClock chip:...

  • LV4 CCD Code Scanning Module
    Available
    Barcode Reader/Scanner Module _A1138

    This LV4 series linear imaging bar code scanner module features a scan speed of 85 scans/sec with small footprint to meet all applications.  Built-in LED, Software commands supported and the affordable costs, the durable design with no moving parts delivers the best choice for the contact scanning required application. More detail given below

    This LV4 series linear imaging bar code scanner module features a scan speed of 85...

    This LV4 series linear imaging bar code scanner module features a scan speed of 85 scans/sec with small footprint to meet all applications.  Built-in LED, Software commands...

  • IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V
    Available
    IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V _A1108

    If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V.

    If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge...

    If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun logic level converter is a small device that safely steps down 5V...

  • IR Infrared Motion Sensor Automatic Light Lamp Switch 110V - 250V
    Available
    IR Infrared Motion Sensor Automatic Light Lamp Switch 250V _A1098

    Color: White- ABS material- Automatic IR motion sensor switch- Automatic turn on/off while detected people come or left- Detecting Range: 140 degree cone angle (within 7 meters)- Voltage: AC 110~250V (50~60Hz)- Working temperature: -20~+50'C- Static power: Less than 0.06W- Resistive load Power: 200W more given below

    Color: White- ABS material- Automatic IR motion sensor switch- Automatic turn on/off...

    Color: White- ABS material- Automatic IR motion sensor switch- Automatic turn on/off while detected people come or left- Detecting Range: 140 degree cone angle (within 7...

  • Si4703 FM Tuner Evaluation Board
    Available
    Si4703 FM Receiver Tuner Evaluation Board _A1083

    Description: This is an evaluation board for the Silicon Laboratories Si4703 FM tuner chip. Beyond enabling you to tune in to FM radio stations, the Si4703 is also capable of detecting and processing both Radio Data Service (RDS) and... More detail given below

    Description: This is an evaluation board for the Silicon Laboratories Si4703 FM tuner...

    Description: This is an evaluation board for the Silicon Laboratories Si4703 FM tuner chip. Beyond enabling you to tune in to FM radio stations, the Si4703 is also capable of...

  • Available
    SOT89/SOT223 To DIP Adapter Board _A1061

    50pcs SOT89 To DIP SOT223 To DIP Adapter Board Transfer Plate Pinboard 1.5mm Pitch Pin Space Test PCB Electronic Circuirt Board 1.5mm pitchDescription:SOT223(Pitch 2.3mm)to SIP3(2.54pin pitch)

    50pcs SOT89 To DIP SOT223 To DIP Adapter Board Transfer Plate Pinboard 1.5mm Pitch Pin...

    50pcs SOT89 To DIP SOT223 To DIP Adapter Board Transfer Plate Pinboard 1.5mm Pitch Pin Space Test PCB Electronic Circuirt Board 1.5mm pitchDescription:SOT223(Pitch 2.3mm)to...

  • IC clamp SOIC8 SOP8 IC Clip +1 adapter Universal For 24C 93C 25 series SOIC SOP Chips
    Available
    IC clamp SOIC8 SOP8 IC Clip +1 adapter Universal For 24C 93C 25 series SOIC SOP Chips _A1039

    Features:100% brand new and high qualityThis item for sop8 chip ,such as 25**, 24c** , 93c** and so on .It can be used for the online in-circuit sop8 -dip8 adapter ,it is used for a sop8 chip programming that has been soldered on circuit board , it can online programming the sop8 chip , do not need take the chip of the circuit board , so it can save people's time More detail given below

    Features:100% brand new and high qualityThis item for sop8 chip ,such as 25**, 24c** ,...

    Features:100% brand new and high qualityThis item for sop8 chip ,such as 25**, 24c** , 93c** and so on .It can be used for the online in-circuit sop8 -dip8 adapter ,it is used...

  • 52x19mm Solar Cell Poly Crystalline Solar Panel
    Available
    52x19mm Solar Cell Poly Crystalline Solar Panel _A1038

    Average Power (Watts): 0.14 Wp Average Current (Amps): 0.28 Imax Average Voltage (Volts): 0.5 Vmax Efficiency : 17.4% SIZE: 52mmx19mm

    Average Power (Watts): 0.14 Wp Average Current (Amps): 0.28 Imax Average Voltage...

    Average Power (Watts): 0.14 Wp Average Current (Amps): 0.28 Imax Average Voltage (Volts): 0.5 Vmax Efficiency : 17.4% SIZE: 52mmx19mm

  • HDC1008 Temperature Humidity Sensor Breakout Board for Arduino
    Available
    HDC1008 Temperature Humidity Sensor Module _A1034

    It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out at a perfectly reasonable 52% when it feels more like 77%. Enter the HDC1008 Temperature + Humidity Sensor - the best way to prove the weatherman wrong! More detail given below

    It's summer and you're sweating and your hair's all frizzy and all you really want to...

    It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out...

  • ADS1015 12 bit Precision Analog to Digital Converter ADC for Arduino Development Board
    Available
    ADS1015 12 bit ADC Precision Analog to Digital Converter Module _A1032

    For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels or two differential channels. More detail given below

    For microcontrollers without an analog-to-digital converter or when you want a...

    For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The...

  • MAX485 Module RS-485 TTL to RS485 MAX485CSA Converter Module For Arduino
    Out of stock
    MAX485 Module RS-485 to TTL Converter Module _A0855

    Features MAX485 chipset; 5.08mm pitch, 2-pin terminals for RS-485 easy communication and wiringSpecification Working voltage: 5VApplication Great for DIY project

    Features MAX485 chipset; 5.08mm pitch, 2-pin terminals for RS-485 easy communication...

    Features MAX485 chipset; 5.08mm pitch, 2-pin terminals for RS-485 easy communication and wiringSpecification Working voltage: 5VApplication Great for DIY project

    ₨ 120
    Add to cart View
  • 40Pin Universal  ZIF Socket  DIP IC 40p _A0848
    Available
    40Pin Universal ZIF Socket DIP IC 40p _A0848

    Description:Brand new and high quality.DIP 8 pin to 40 pin IC's Socket.Low Contact Resisto.Material: High quality plastic.Size:6.6cm x 2.3cm x 1.1cm - 2.6inch x 0.91inch x 0.43inch. Package Included:1 x ZIF Socket 40Pin

    Description:Brand new and high quality.DIP 8 pin to 40 pin IC's Socket.Low Contact...

    Description:Brand new and high quality.DIP 8 pin to 40 pin IC's Socket.Low Contact Resisto.Material: High quality plastic.Size:6.6cm x 2.3cm x 1.1cm - 2.6inch x 0.91inch x...

  • LM386 Audio Amplifier Module Gain 200 , 5V-12V Input_A0845
    Available
    LM386 Audio Amplifier Module Gain 200 , 5V-12V Input_A0845

    Description:•    Onboard LM386 Chip•    20 multiplier benefits circuit design•    on-board speaker wiring Block•    on-board 10K variable resistor, you can adjust the volume of the enlarged•    Onboard power indicator•    the chip pin leads, can be directly input audio signal•    Operating voltage: 5 ~ 12VPackage Included:1x LM386 Audio Amplifier Module

    Description:•    Onboard LM386 Chip•    20 multiplier benefits circuit design•...

    Description:•    Onboard LM386 Chip•    20 multiplier benefits circuit design•    on-board speaker wiring Block•    on-board 10K variable resistor, you can adjust the volume of...

  • Gas Sensor (NH3,NOx, alcohol, Benzene, Smoke,CO2 ,etc.)_A0932
    Out of stock
    Gas Sensor (NH3,NOx, alcohol, Benzene, Smoke,CO2 ,etc.)_A0932

    FEATURES: Wide detecting scope Fast response and High sensitivity Stable and long life Simple drive circuitAPPLICATION:They are used in air quality control equipments for buildings/offices, are suitable for detecting of NH3,NOx, alcohol, Benzene, smoke,CO2 ,etc.Datasheet Link: https://www.olimex.com/Products/Components/Sensors/SNS-MQ135/resources/SNS-MQ135.pdf ...more detail given below

    FEATURES: Wide detecting scope Fast response and High sensitivity Stable and long life...

    FEATURES: Wide detecting scope Fast response and High sensitivity Stable and long life Simple drive circuitAPPLICATION:They are used in air quality control equipments for...

    ₨ 350
    Add to cart View
  • MG-811 CO2 Carbon Diaoxide Gas Sensor Module W/ Analog TTL Level  Temperature Compensated Output _A0912
    Out of stock
    MG-811 CO2 Carbon Diaoxide Gas Sensor Module W/ Analog TTL Level Temperature Compensated Output _A0912

    Features: Has a signal output instructionsDual signal output (analog output, and TTL-level output)TTL output valid signal is low. (When output low signal light can be directly connected to the microcontroller) Analog output (0 ~ 2V / 0-4V) voltage output selectable default hair 0-2VCarbon dioxide has a high sensitivity and good selectiv....more detail given below

    Features: Has a signal output instructionsDual signal output (analog output, and...

    Features: Has a signal output instructionsDual signal output (analog output, and TTL-level output)TTL output valid signal is low. (When output low signal light can be directly...

    ₨ 8,000
    Add to cart View
  • MCP4725 I2C 12-Bit DAC w/I2C Interface Breakout Board Module  GY4785_ A0914
    Available
    MCP4725 I2C 12-Bit DAC w/I2C Interface Breakout Board Module GY4785_ A0914

    Description:This version of the MCP4725 Breakout fixes a few issues with the board including the IC footprint, the I2C pinout, changes the overall board dimensions to better fit your projects, and a few more minor tweaks. This board breaks out each pin you will need to access and use the MCP4725 including GND and Signal OUT pin...more detail given below

    Description:This version of the MCP4725 Breakout fixes a few issues with the board...

    Description:This version of the MCP4725 Breakout fixes a few issues with the board including the IC footprint, the I2C pinout, changes the overall board dimensions to better fit...

  • EEPROM I2C base AT24C256  Memory Module _A0858
    Out of stock
    EEPROM I2C base AT24C256 Memory Module _A0858

    1- 8P onboard chip holder, install AT24C256 chip; 2 -pin power supply, on-board power indicator;3 -onboard I2C communications required pull-up resistor;4 -All pins are drawn and marked, and the address input pins can directly write protection jumper settings;5-PCB board Dimensions: 36.5 (mm) x12 (mm)

    1- 8P onboard chip holder, install AT24C256 chip; 2 -pin power supply, on-board power...

    1- 8P onboard chip holder, install AT24C256 chip; 2 -pin power supply, on-board power indicator;3 -onboard I2C communications required pull-up resistor;4 -All pins are drawn and...

    ₨ 240
    Add to cart View
  • 3 Channel / Way Video Switch Module for FPV _A0972
    Available
    3 Channel / Way Video Switch Module for FPV _A0972

    This tiny device is a great accessory for any FPV model and switches the view between two different cameras on command or automatically in case of camera failure.It has in-built micro-controller simultanously checks the last ten PPM signals for glitches within the signal for errors. It will automatically change the view from Camera "A" ... more detail given below

    This tiny device is a great accessory for any FPV model and switches the view between...

    This tiny device is a great accessory for any FPV model and switches the view between two different cameras on command or automatically in case of camera failure.It has in-built...

  • MinimOSD On-Screen Display OSD Board for APM / Pixhawk  Ardupilot_A0982
    Available
    MinimOSD On-Screen Display OSD Board for APM / Pixhawk Ardupilot_A0982

    Features:Perfect combination of ATmega328 and MAX7456.Flight control OS functions Supports MAVLink protocol.Uses MAVLink OSD.Supports pirate APM2.52 APM 2.6 flight model ... more detail given below

    Features:Perfect combination of ATmega328 and MAX7456.Flight control OS functions...

    Features:Perfect combination of ATmega328 and MAX7456.Flight control OS functions Supports MAVLink protocol.Uses MAVLink OSD.Supports pirate APM2.52 APM 2.6 flight model ......

  • 5V Wireless Charging Module Coil (Transmitter/Receiver) _A0923
    Available
    5V Wireless Charging Module Coil (Transmitter/Receiver) _A0923

    Features:1. Stable power supply2. Insulation Coil3. Space-saving design ...detail given below

    Features:1. Stable power supply2. Insulation Coil3. Space-saving design ...detail given...

    Features:1. Stable power supply2. Insulation Coil3. Space-saving design ...detail given below

  • Pulse Sensor (Heart-rate Beats Per Minute)  _A0813
    Out of stock
    Pulse Sensor (Heart-rate Beats Per Minute) _A0813

     Heart rate data can be really useful whether you’re designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart beat. The problem is that heart rate can be difficult to measure. Luckily, the Pulse Sensor Amped can solve that problem!...detail given below

     Heart rate data can be really useful whether you’re designing an exercise routine,...

     Heart rate data can be really useful whether you’re designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart...

    ₨ 650
    Add to cart View
  • DS1077 Programmable Oscillator (16.2kHz to 133MHz) Breakout Board _A0797
    Available
    DS1077 Programmable Oscillator (16.2kHz to 133MHz) Breakout Board _A0797

    Description: This is a breakout board for the DS1077 is a dual-output, programmable, oscillator. Contains a filter capacitor and all 8 pins broken out to a 0.1" header. The DS1077 can be used as a processor-controlled frequency synthesizer or as a standalone oscillator. The two synchronous output operating frequencies are user-adjustable in submultiples of ...more detail given below

    Description: This is a breakout board for the DS1077 is a dual-output, programmable,...

    Description: This is a breakout board for the DS1077 is a dual-output, programmable, oscillator. Contains a filter capacitor and all 8 pins broken out to a 0.1" header. The...

  • SparkFun I2C/SPI-to-UART Breakout - SC16IS750
    Available
    SparkFun I2C/SPI-to-UART Breakout - SC16IS750

    Description: This is a breakout board for the SC16IS750, a handy chip used to convert I2C or SPI serial signals to a single-channel, high-performance UART. As an application example: we use this chip on ourWiFly Shield to allow an Arduino to communicate with the WiFly RN-131G module - which is normally controlled via a UART - using an SPI interface. This allows....more detial given below

    Description: This is a breakout board for the SC16IS750, a handy chip used to convert...

    Description: This is a breakout board for the SC16IS750, a handy chip used to convert I2C or SPI serial signals to a single-channel, high-performance UART. As an application...

  • SparkFun Parallel DAC Breakout - AD5330 (8-Bit)
    Available
    SparkFun Parallel DAC Breakout - AD5330 (8-Bit)

    Description: This is a simple breakout board for Analog Device’s AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface, and can operate from a 2.5 to 5.5V supply consuming just 115uA (at 3V). The DB0-7 pins, the parallel data inputs, are used to configure the analog output voltage. CS selects the device, and data is loaded into...more detail given below

    Description: This is a simple breakout board for Analog Device’s AD5330 8-bit...

    Description: This is a simple breakout board for Analog Device’s AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface, and can operate from a 2.5...

  • SparkFun Danger Shield
    Available
    SparkFun Danger Shield

    Description: The SparkFun Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs. The Danger Shield has so much potential; we can’t wait to see what you’re able to do with it! The shield’s features include...more detail given below

    Description: The SparkFun Danger Shield mounts on top of your Arduino or Arduino Pro...

    Description: The SparkFun Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs. The Danger Shield has so...

  • SparkFun 5-Way Tactile Switch Breakout
    Available
    SparkFun 5-Way Tactile Switch Breakout

    Description: Sometimes you need a very small directional input device (world’s smallest game controller, anyone?) This 5-way tactile switch (up, down, left, right, and center click) allows for joystick-like control in a very small package. This breadboard-friendly board breaks out all the switch signals, and includes pullup resistors configured so that the  ...more detail given below

    Description: Sometimes you need a very small directional input device (world’s smallest...

    Description: Sometimes you need a very small directional input device (world’s smallest game controller, anyone?) This 5-way tactile switch (up, down, left, right, and center...

  • On sale!
    MAX6675 K-type Thermocouple Temperature Sensor module _A0629
    Available
    MAX6675 K-type Thermocouple Temperature Sensor module _A0629

    Description: MAXIM IC MAX6675 Cold Junction Compensated K-Type Thermocouple to Digital Converter. This simple 8-pin SOIC IC attaches directly to any K-Type Thermocouple and interfaces via a SPI read-only interface. Works great with 8-pin SOIC to DIP adapters. 0.25C Resolution 0C to +1024C Minimal 2-wire digital interface  ...detail give below

    Description: MAXIM IC MAX6675 Cold Junction Compensated K-Type Thermocouple to Digital...

    Description: MAXIM IC MAX6675 Cold Junction Compensated K-Type Thermocouple to Digital Converter. This simple 8-pin SOIC IC attaches directly to any K-Type Thermocouple and...

    Reduced price! ₨ 750
    Add to cart View
  • AD9833 DDS Signal Generator Module _A0561
    Available
    AD9833 DDS Signal Generator Module _A0561

    1.high quality. 2.The AD9833 is a low power programmable waveform generator capable of producing sine, triangular, and square wave outputs. 3.Waveform generation is required in various types of sensing, actuation, and time domain reflectometry applications....more detail given below Arduino Code Given Below

    1.high quality. 2.The AD9833 is a low power programmable waveform generator capable of...

    1.high quality. 2.The AD9833 is a low power programmable waveform generator capable of producing sine, triangular, and square wave outputs. 3.Waveform generation is required in...

  • IIC I2C Serial Interface Module for 16x2/20x4 LCD _A0541
    Available
    IIC I2C Serial Interface Module for 16x2/20x4 LCD _A0541

    If you have a problem with the wiring, multi-line LCD display makes confusing or inadequate leg Arduino I2C LCD module, this is the recommended option. It can be connected to the LCD monitor 16x2 or 20x4 using wires only two lines to help ease leg rest Arduino to use the E key, easy to use with standard library available.

    If you have a problem with the wiring, multi-line LCD display makes confusing or...

    If you have a problem with the wiring, multi-line LCD display makes confusing or inadequate leg Arduino I2C LCD module, this is the recommended option. It can be connected to...

  •  MPX5700AP PRESSURE SENSOR _A0538
    Available
    MPX5700AP PRESSURE SENSOR _A0538

    Product Information Connection Size: 4.928mm MSL: - No. of Pins: 6 Operating Pressure Max: 700kPa Operating Pressure Min: 15kPa Operating Temperature Max: 125°C Operating Temperature Min: -40°C Packaging: Each Pressure Type: Absolute SVHC: No SVHC (17-Dec-2014) Sensitivity, V/P: ...more detail given below

    Product Information Connection Size: 4.928mm MSL: - No. of Pins: 6 Operating Pressure...

    Product Information Connection Size: 4.928mm MSL: - No. of Pins: 6 Operating Pressure Max: 700kPa Operating Pressure Min: 15kPa Operating Temperature Max: 125°C Operating...

  • Xbee Breakout Board Module (Expansion/Adapter board) _ A0501
    Out of stock
    Xbee Breakout Board Module (Expansion/Adapter board) _ A0501

    Description:  This is a Simple Breakout board for the Popular Product from Digi XBee This board Breaks out All 20 pins of the XBee to a 0.1 "standard spacing header The Dual row spacing BETWEEN 0.1." headers is 0.5 "making it Breadboard DIP Friendly. . We highly recommend using the female sockets to avoid having to ....detail given below

    Description:  This is a Simple Breakout board for the Popular Product from Digi XBee...

    Description:  This is a Simple Breakout board for the Popular Product from Digi XBee This board Breaks out All 20 pins of the XBee to a 0.1 "standard spacing header The Dual row...

    ₨ 400
    Add to cart View
  • Double-Sided Protoboard 5cm x 7cm _A0471
    Available
    Double-Sided Protoboard 5cm x 7cm _A0471

    Specification Base Material : FR - 4 Protoboard Type : Double Side Board Size : 5 x 7cm Board Thickness : 1.6mm Hole Pitch : 2.54mm Hole Quantity : 18 x 24

    Specification Base Material : FR - 4 Protoboard Type : Double Side Board Size : 5 x...

    Specification Base Material : FR - 4 Protoboard Type : Double Side Board Size : 5 x 7cm Board Thickness : 1.6mm Hole Pitch : 2.54mm Hole Quantity : 18 x 24

  • 0-5Kg Weight Load Cell Sensor for Electronic Balance_A0470
    Out of stock
    0-5Kg Weight Load Cell (strain gauge pressure) Sensor for Electronic Balance_A0470

    This weight sensor load cell is widely used in electronic counting scales,platform scales etc. Its range is 0-5Kg...more detail given below

    This weight sensor load cell is widely used in electronic counting scales,platform...

    This weight sensor load cell is widely used in electronic counting scales,platform scales etc. Its range is 0-5Kg...more detail given below

    ₨ 730
    Add to cart View
  • Micro TF SD Card Module_A0477
    Available
    Micro TF SD Card Module_A0477

    Control Interface:A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin3.3V regulator circuit:LDO regulator output 3.3V as level converter chip, Micro SD card supply.. more detail given below.

    Control Interface:A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,...

    Control Interface:A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal...

  • Smart Home Development Kit for Android apps _A0418
    Available
    Smart Home Development Kit for Android apps _A0418

    Description:External power supply voltage: 7 ~ 12V (> 500mA)Relay Max Switching Voltage: 240VAC/60VDCRelay Max Switching Current: 5AContact load capacity: 1A 250VAC, 3A 120VA / 24VDCNumber of relays: 4Wireless output interface: (serial) xBee / Bluetooth Bee / RFBee occupied ports: (relay) Digital mouth 2,3,4,5, (wireless module) Digital mouth 0,1

    Description:External power supply voltage: 7 ~ 12V (> 500mA)Relay Max Switching...

    Description:External power supply voltage: 7 ~ 12V (> 500mA)Relay Max Switching Voltage: 240VAC/60VDCRelay Max Switching Current: 5AContact load capacity: 1A 250VAC, 3A 120VA...

  • Electrics Door Look Solenoid 12V DC
    Out of stock
    Electrics Door Look Solenoid 12V DC _A0341

    Open Frame Actuator Door Lock Solenoid Desinged with the open frame type and mount board, high power.Easy to install for the electric door lock or other automatic door lock systems with the mounting board.

    Open Frame Actuator Door Lock Solenoid Desinged with the open frame type and mount...

    Open Frame Actuator Door Lock Solenoid Desinged with the open frame type and mount board, high power.Easy to install for the electric door lock or other automatic door lock...

    ₨ 2,000
    Add to cart View
  • On sale!
    12V DC Pull Type Open Frame Electronic solenoid
    Available
    12V DC Pull Type Open Frame Electronic solenoid_A0340

    Model: ZYE1-1264ZApplication range:1) Games: tiger eating angles, coin choosers2) Selling machines, coin changers, ticket selling machines3) Office equipment: listing machines, computer equipment, fax, duty printers, photo printers, typewriters, cash registers, drawing machines, drinking 4) Transport devices: auto door locks, safe belt locks, car solenoid valves, packing facilitiesDC12V 10mm 15N

    Model: ZYE1-1264ZApplication range:1) Games: tiger eating angles, coin choosers2)...

    Model: ZYE1-1264ZApplication range:1) Games: tiger eating angles, coin choosers2) Selling machines, coin changers, ticket selling machines3) Office equipment: listing machines,...

    Reduced price! ₨ 1,400
    Add to cart View
  • Water/Gas Flow Solenoid Valve Normally Closed (12V DC inlet valve)
    Available
    Water/Gas Flow Solenoid Valve Normally Closed (12V DC inlet valve)_A0339

    Technical parameters:   1 Type: Oriented (one-way) solenoid valve  2 Rated voltage: DC 12V 3 Rated current:. 12V-300MA 4 Work:. Quota system (ie, working time , can work for two or so hours) 5 Insulation class:. E class insulation 6 Temperature: ( 0-75 ° C ) 7 Use pressure: 0.02-0.8Mpa

    Technical parameters:   1 Type: Oriented (one-way) solenoid valve  2 Rated voltage: DC...

    Technical parameters:   1 Type: Oriented (one-way) solenoid valve  2 Rated voltage: DC 12V 3 Rated current:. 12V-300MA 4 Work:. Quota system (ie, working time , can work for two...

  • VIBRATION SENSOR MODULE
    Available
    VIBRATION SENSOR MODULE_A0248

    The Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer.

    The Vibration module based on the vibration sensor SW-420 and Comparator LM393 to...

    The Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by...

  • 5-CHANNEL FLAME SENSOR MODULE
    Available
    5-CHANNEL FLAME SENSOR MODULE_A0241

    . 5 channel infrared flame sensor design, wide range of detection (the detection range of the ordinary single flame sensor is probably about 30°, as the distance increases, the range is gradually reduced, the detection range of the product is greater than 120°). Able to output a digital signal (high and low), easy to use.

    . 5 channel infrared flame sensor design, wide range of detection (the detection range...

    . 5 channel infrared flame sensor design, wide range of detection (the detection range of the ordinary single flame sensor is probably about 30°, as the distance increases, the...

  • TILT SENSOR MODULE
    Available
    TILT SENSOR MODULE_A0242

    Model SW-520DQuantity: 1Color: BlueMaterial: PCBFeatures: The output can be directly connected with the single chip microcomputer, through the single chip microcomputer to detect the high and low level, thus to detect angle change.Application: Angular transducer, tilt slant angle sensorOther Working voltage: 3.3~5V; Output form: number switch output(0 & 1); LM393 comparator  

    Model SW-520DQuantity: 1Color: BlueMaterial: PCBFeatures: The output can be directly...

    Model SW-520DQuantity: 1Color: BlueMaterial: PCBFeatures: The output can be directly connected with the single chip microcomputer, through the single chip microcomputer to...

  • MOUNTING BRACKET FOR ULTRASONIC SENSOR
    Available
    MOUNTING BRACKET FOR ULTRASONIC SENSOR_A0247

    Description:Thickness :2.8mm - 3.1mmInner diameter: 16mm

    Description:Thickness :2.8mm - 3.1mmInner diameter: 16mm

    Description:Thickness :2.8mm - 3.1mmInner diameter: 16mm

  • ROTARY ENCODER MODULE
    Out of stock
    ROTARY ENCODER MODULE_A0144

    Description: These are continuous rotary encoder switcWith built in push button switch (push to operate)

    Description: These are continuous rotary encoder switcWith built in push button switch...

    Description: These are continuous rotary encoder switcWith built in push button switch (push to operate)

    ₨ 270
    Add to cart View
  • PROTOSHIELD + MINI PROTOBOARD FOR ARDUINO UNO
    Available
    PROTOSHIELD + MINI PROTOBOARD FOR ARDUINO UNO_A0261

    100% brand new and high quality Arduino protoshield prototype with 170 mini breadboard. 1 reset button, 1 general use button, and 2 LED circuits can be used directly. The mini breadboard has 170 tie points.

    100% brand new and high quality Arduino protoshield prototype with 170 mini...

    100% brand new and high quality Arduino protoshield prototype with 170 mini breadboard. 1 reset button, 1 general use button, and 2 LED circuits can be used directly. The mini...