Categories

Specials

All specials

Best sellers

All best sellers

Motor Driver Modules There are 17 products.

  • L9110 Fan Module for Arduino
    Available
    Fire Fighting FAN Module for Fire Fighting Robot _A1198

    Product Size: 50 * 26 * 15mm (excluding propellers) Propeller diameter: 75mm Operating voltage: 5V L9110 driver can control Reversible with mounting holes compatible steering rudder propeller control quality and high efficiency. 20cm making it easy to blow out the flame can be used outside of the fire lighter robot, robot design and development of essential

    Product Size: 50 * 26 * 15mm (excluding propellers) Propeller diameter: 75mm Operating...

    Product Size: 50 * 26 * 15mm (excluding propellers) Propeller diameter: 75mm Operating voltage: 5V L9110 driver can control Reversible with mounting holes compatible steering...

  • Out of stock
    Stepper Motor Arduino 3D Printer / CNC Shield V3 _A1182

    100% brand new and high qualityThis expansion board as a driver expansion board, can be used for engraving machines, 3D printers.It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.UNO for more detail given below

    100% brand new and high qualityThis expansion board as a driver expansion board, can be...

    100% brand new and high qualityThis expansion board as a driver expansion board, can be used for engraving machines, 3D printers.It is a total of four slots, can drive four...

    ₨ 550
    Add to cart View
  • IRF520 N-Channel MOSFET  Driver Module_A0862
    Available
    IRF520 N-Channel MOSFET Driver Module_A0862

    Description:Size: 33*24mmWeight: 10gVoltage: 3.3V, 5VPorts: Digital LevelOutput load voltage :0-24VOutput load current: <5A (1A above need to add heat sink)Datasheet Link: http://www.irf.com/product-info/datasheets/data/irf520.pdf ...more detail given below

    Description:Size: 33*24mmWeight: 10gVoltage: 3.3V, 5VPorts: Digital LevelOutput load...

    Description:Size: 33*24mmWeight: 10gVoltage: 3.3V, 5VPorts: Digital LevelOutput load voltage :0-24VOutput load current: <5A (1A above need to add heat sink)Datasheet Link:...

  • 20A Brush (DC ) Motor Speed Controller w/ Brake ESC _A0967
    Available
    20A Brush (DC ) Motor Speed Controller w/ Brake ESC _A0967

    Specification:1pcs 20A brush speed controller.Function: forward, reverse, brakeworking voltage: 3.0V---9.4V.Diaensions(L*W*H): 35.0*22.0*6.0mmCurrent(A): 20ADriver frequency: 2KHzInput: Li-Po 2S / Ni-Mh/Ni-cd 4-7cellConstant current 20A Max 25A< 30s Pulsed 50A< 5sBrake On / with brakeThis ESC can work with 130/180/260/280/380 Brush MotorSize:20*20 MM

    Specification:1pcs 20A brush speed controller.Function: forward, reverse, brakeworking...

    Specification:1pcs 20A brush speed controller.Function: forward, reverse, brakeworking voltage: 3.0V---9.4V.Diaensions(L*W*H): 35.0*22.0*6.0mmCurrent(A): 20ADriver frequency:...

  • CNC Router Single 1 Axis Controller Stepper Motor Driver TB6560 3A Driver Board _A0990
    Available
    CNC Router Single 1 Axis Controller Stepper Motor Driver TB6560 3A Driver Board _A0990

    Description:Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx)Rated maximum output: ± 3A, peak 3.5A.Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply.Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance...more detail given below

    Description:Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx)Rated maximum...

    Description:Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx)Rated maximum output: ± 3A, peak 3.5A.Working voltage DC 10V-35V. Recommended to use a switching power supply...

  • 60A Waterproof Brushed (DC Motor) Electronic Speed Controller ESC for RC Car _A0969
    Available
    60A Waterproof Brushed (DC Motor) Electronic Speed Controller ESC for RC Car _A0969

    Water-proof and dust-proof, suitable for all-weather condition races.Compact size, suitable for various car chassis. Small size with built-in capacitor module.Fwd/Rev/Br running mode fits for various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).Great current endurance capability.Great built-in BEC output capacity....detail given below

    Water-proof and dust-proof, suitable for all-weather condition races.Compact size,...

    Water-proof and dust-proof, suitable for all-weather condition races.Compact size, suitable for various car chassis. Small size with built-in capacitor module.Fwd/Rev/Br running...

  • 16 Channel 12-bit PWM SERVO DRIVER _A0899
    Available
    16 Channel 12-bit PWM SERVO DRIVER _A0899

    If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, the limited PWM outputs of your microcontroller would be a big problem for you. To overcome this problem, the only thing you should do is to get an Adafruit 16-Channel 12-Bit PWM/Servo Driver...detail below

    If you want to make a robot which has lots of moving parts or if you want to control...

    If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, the limited PWM outputs of your microcontroller would be a...

  • Out of stock
    30A Single H-Bridge VNH2SP30-Monster Driver Module _A0892

    This is essentially a ramped up version of Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so thi... detail given below 

    This is essentially a ramped up version of Ardumoto motor driver shield. For this...

    This is essentially a ramped up version of Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor...

    ₨ 800
    Add to cart View
  • 30A Dual H-bridge Monster Moto Shield VNH2SP30 _A0890
    Out of stock
    30A Dual H-bridge Monster Moto Shield VNH2SP30 _A0890

    Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown  ... detail below

    Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A...

    Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum...

    ₨ 950
    Add to cart View
  • Ardumoto - Motor Driver Shield _A0522
    Available
    Ardumoto - Motor Driver Shield _A0522

    Description: This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the SparkFun Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF...more detail given below

    Description: This is a motor shield for Arduino that will control two DC motors. Based...

    Description: This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the SparkFun Ardumoto can drive up to 2 amps per channel. The board...

  • 5A Integrated 3Axis CNC TB6600 +Intelligent Handle Keyboard+ LCD Digital Display with controller _A0450
    Available
    5A Integrated 3Axis CNC TB6600 +Intelligent Handle Keyboard+ LCD Digital Display with controller _A0450

    Detail given below....

    Detail given below....

    Detail given below....

    ₨ 19,500
    Add to cart View
  • 5A Integrated 3Axis CNC TB6600 Stepping Driver Box Set,_A0449
    Available
    5A Integrated 3 Axis CNC TB6600 Stepper Driver w/ Controller, LCD and Keypad Box Set,_A0449

    Comparing with the previous 3rd generation TB6560AHQ Stepper Driver, besides including all the functions that the 3rd generation TB6560AHQ Stepper Driver has, this newly released 3rd generation TB6600HG Stepper Driver was specially developed for bigger stepper motors which have higher current. As long as the current range of the stepper motors is within 0.2-5.0 amps.more detail given below

    Comparing with the previous 3rd generation TB6560AHQ Stepper Driver, besides including...

    Comparing with the previous 3rd generation TB6560AHQ Stepper Driver, besides including all the functions that the 3rd generation TB6560AHQ Stepper Driver has, this newly...

    ₨ 19,500
    Add to cart View
  • A4988 StepStick Stepper Motor Driver Module (35V, 2A) with heat-sink _A0438
    Available
    A4988 StepStick Stepper Motor Driver Module (35V, 2A) with heat-sink _A0438

    A4988 is a complete microstepping motor driver with built-in translator for easy operation. The product can be full, half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper motor output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can slow or mixed decay mode...More detail given below.

    A4988 is a complete microstepping motor driver with built-in translator for easy...

    A4988 is a complete microstepping motor driver with built-in translator for easy operation. The product can be full, half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper...

  • ULN2003 Driver Board_A0398
    Available
    ULN2003 Driver Board_A0398

    A, B, C, D four-phase LED indicates the status of the stepper motor work.Stepper motor with a standard interface, when used directly pluggable.Drive Module Board Size:2.8cm x 2.8cm x 2cm - 1.1inch x 1.1inch x 0.79inch. 

    A, B, C, D four-phase LED indicates the status of the stepper motor work.Stepper motor...

    A, B, C, D four-phase LED indicates the status of the stepper motor work.Stepper motor with a standard interface, when used directly pluggable.Drive Module Board Size:2.8cm x...

  • Dual H-Bridge Motor Driver Module (L298)
    Available
    Dual H-Bridge Motor Driver Module (L298)_A0023

    This dual bidirectional motor driver is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently control two motors of up to 2A each in both directions. It is ideal for robotic applications and well suited for connection to a microcontroller requiring just a couple of control lines per motor.

    This dual bidirectional motor driver is based on the very popular L298 Dual H-Bridge...

    This dual bidirectional motor driver is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently...

  • 28BYJ48 5V STEPPER MOTOR WITH ULN2003 DRIVER BOARD
    Available
    28BYJ48 5V STEPPER MOTOR WITH ULN2003 DRIVER BOARD_A0034

    Descriptio Signal Output function : Brand new and high quality.Voltage: 5V.Diameter: 28mm.

    Descriptio Signal Output function : Brand new and high quality.Voltage: 5V.Diameter:...

    Descriptio Signal Output function : Brand new and high quality.Voltage: 5V.Diameter: 28mm.

  • ARDUINO STEPPER MOTOR/SERVO/DC MOTOR SHEILD
    Out of stock
    ARDUINO STEPPER MOTOR/SERVO/DC MOTOR SHEILD_A0033

    Arduino is a great starting point for electronics, and with a motor shield it can also be a nice tidy platform for robotics and mechatronics. Here is a design for a full-featured motor shield that will be able to power many simple to medium-complexity projects.

    Arduino is a great starting point for electronics, and with a motor shield it can also...

    Arduino is a great starting point for electronics, and with a motor shield it can also be a nice tidy platform for robotics and mechatronics. Here is a design for a...

    ₨ 350
    Add to cart View