Categories

Specials

All specials

Best sellers

All best sellers

Servo & Gear Motors There are 24 products.

  • 57 stepper motor 1.8 degrees 3A 12kg.cm two-phase hybrid four-line body length 56mm
    Available
    3A Torque 12kg.cm 57 Stepper Motor 1.8 Degrees Two-Phase Hybrid Four-line_A1431

    57 stepper motor      Model : 23HD56005Y-30B     Step angle: 1.8 degrees      Current: 3A     Torque: 12kg.cm     Body length: 56mm    Motor shaft diameter: 8mm    Two-phase hybrid  four-wire

    57 stepper motor      Model : 23HD56005Y-30B     Step angle: 1.8 degrees      Current:...

    57 stepper motor      Model : 23HD56005Y-30B     Step angle: 1.8 degrees      Current: 3A     Torque: 12kg.cm     Body length: 56mm    Motor shaft diameter: 8mm    Two-phase...

  • 37GB-3540 DC gear motor 12v 37mm DC gear motor large torque large load
    Available
    12V 80RPM Torque 7kg.cm DC gear motor high _A1398

    Voltage: 12V     Power: 5w     Speed: 80 rev / min               Shaft: 6mm     Shaft length: 21mm (target axis)               Motor diameter: 37mm    Length: 87mm                            moment of force :7kg.cm                           

    Voltage: 12V     Power: 5w     Speed: 80 rev / min               Shaft: 6mm     Shaft...

    Voltage: 12V     Power: 5w     Speed: 80 rev / min               Shaft: 6mm     Shaft length: 21mm (target axis)               Motor diameter: 37mm    Length: 87mm...

  • 37GB-550 DC gear motor double shaft high power motor large torque motor
    Out of stock
    12v 125 RPM Torque 20kg.cm DC Gear Motor Double Shaft High Power Motor _A1397

    Model No.37GB-550 Voltage: 12v Speed: 125 r / min Torque: 20kg.cm Power: 20w Motor shaft: D-axis (flat shaft)

    Model No.37GB-550 Voltage: 12v Speed: 125 r / min Torque: 20kg.cm Power: 20w Motor...

    Model No.37GB-550 Voltage: 12v Speed: 125 r / min Torque: 20kg.cm Power: 20w Motor shaft: D-axis (flat shaft)

    ₨ 1,400
    Add to cart View
  • N20 motor DC gear motor with Hall encoder speed intelligent car motor
    Out of stock
    3-12V RPM 500 DC Gear Motor N20 With Hall Encoder_A1386

      Product Introduction                Name: N20 DC gear motor Voltage range: 3-12V Pulse: 4 / laps Resolution: Pulse * Reduction ratio Reduction ratio: 1: 100 1:30  (need to slow down please note, no notes random delivery) Wiring definition:      ※ red line black line: motor poles      ※ green: encoder GND      ※ blue: encoder VCC (3.3V-5V)      ※ white and yellow: motor A phase and B phase   Note: blue and green do not turn the reverse, then...

      Product Introduction                Name: N20 DC gear motor Voltage range: 3-12V...

      Product Introduction                Name: N20 DC gear motor Voltage range: 3-12V Pulse: 4 / laps Resolution: Pulse * Reduction ratio Reduction ratio: 1: 100 1:30  (need to...

    ₨ 600
    Add to cart View
  • 37GB-385 with encoder DC motor with encoder motor
    Available
    12v 220 RPM Torque: 5.2kg.cm DC Gear Motor With Encoder _A1384

     Model No.37GB-385 Voltage: 12v  Speed: 220 r / min         Load torque: 2kg.cm  Stall torque: 5.2kg.cm  No-load current: 150mA   Stall current: 1.5A  Reduction ratio: 1: 18 

     Model No.37GB-385 Voltage: 12v  Speed: 220 r / min         Load torque: 2kg.cm  Stall...

     Model No.37GB-385 Voltage: 12v  Speed: 220 r / min         Load torque: 2kg.cm  Stall torque: 5.2kg.cm  No-load current: 150mA   Stall current: 1.5A  Reduction ratio: 1: 18 

  • Available
    110KG Highest Torque Metal Gear Motor With Driver Board _A1103

    Operating voltage: 12V to 24V (DC)No-load rotational current: <500mAMaximum torque: 110kg.cm (24V) (measured, non-theoretical value)Angular velocity: 0.12s / 60 [deg.] (60 degrees of rotation required 0.12s), 24V time;                         0.24 S / 60 [deg.] (60 degrees of rotation required 0.24s), while 12V;... More detail given below

    Operating voltage: 12V to 24V (DC)No-load rotational current: <500mAMaximum torque:...

    Operating voltage: 12V to 24V (DC)No-load rotational current: <500mAMaximum torque: 110kg.cm (24V) (measured, non-theoretical value)Angular velocity: 0.12s / 60 [deg.] (60...

  • 130 Motor
    Available
    DC Motor simple toy _A1094

    Motor Specification: 15 * 20 MM Motor height: 25 MM Output shaft: 2.0 MM Output shaft length: 7.5 MM Rated voltage: 3V 3V: 16500 turn   -load current of about 350MA, Stall Current 1.3A Single Weight: about 15g Model: 130

    Motor Specification: 15 * 20 MM Motor height: 25 MM Output shaft: 2.0 MM Output shaft...

    Motor Specification: 15 * 20 MM Motor height: 25 MM Output shaft: 2.0 MM Output shaft length: 7.5 MM Rated voltage: 3V 3V: 16500 turn   -load current of about 350MA, Stall...

  • RDS3115mg Robot Servo Metal Gear ,270 °
    Available
    270 Degree 15Kg RDS3115 Robot Metal Gear Servo With Brackets _A1085

    General Specification Storage temperature range: -20°C ~ 60°C Operating temperature range: -10°C ~ 50°C Operating voltage: 5V ~ 7.2V  More Specs Given below

    General Specification Storage temperature range: -20°C ~ 60°C Operating temperature...

    General Specification Storage temperature range: -20°C ~ 60°C Operating temperature range: -10°C ~ 50°C Operating voltage: 5V ~ 7.2V  More Specs Given below

  • Available
    270 Degree 35Kg High Torque RDS3135 Metal Gear Coreless Motor Digital Robot Servo with Brackets _A1084

    General Specification Storage temperature range: -20°C ~ 60°C Operating temperature range: -10°C ~ 50°C Operating voltage: 6V ~ 8.4V  More detail given below

    General Specification Storage temperature range: -20°C ~ 60°C Operating temperature...

    General Specification Storage temperature range: -20°C ~ 60°C Operating temperature range: -10°C ~ 50°C Operating voltage: 6V ~ 8.4V  More detail given below

  • MG996 METAL GEAR SERVO
    Out of stock
    MG996 Metal Gear Servo 10Kg-Cm (COPY) _A0239

    This is essentially an upgraded version of the famous towerpro MG995 servo. It now has a redesigned PCB and IC controll system which makes it far more accurate. Its internal gearing and motor are also upgraded to improve dead bandwith and centering. Please Note that it is the copy of the orignal MG996 Servo . the quality is not the same as the orignal

    This is essentially an upgraded version of the famous towerpro MG995 servo. It now has...

    This is essentially an upgraded version of the famous towerpro MG995 servo. It now has a redesigned PCB and IC controll system which makes it far more accurate. Its internal...

    ₨ 650
    Add to cart View
  • 3v-8v TT Gear Motor for Smart Car Robot_A0027
    Out of stock
    3V-8V TT Gear Motor for Smart Car Robot_A0027

    Operating voltage: 3V ~ 12V DC (recommended working voltage of about 6 to 8V) Maximum torque: 800gf cm min (3V time) No-load speed: 1:48 (3V time) Load Current: 70mA (250mA MAX) (3V time) This motor plus EMC, anti-interference ability. Microcontroller without interference Package Included: 1 X TT motor

    Operating voltage: 3V ~ 12V DC (recommended working voltage of about 6 to 8V) Maximum...

    Operating voltage: 3V ~ 12V DC (recommended working voltage of about 6 to 8V) Maximum torque: 800gf cm min (3V time) No-load speed: 1:48 (3V time) Load Current: 70mA (250mA MAX)...

    ₨ 130
    Add to cart View
  • 12V Linear Motor / Actuator 12inch Stroke (300mm) _ET001
    Available
    12V Linear Motor / Actuator 12inch Stroke (300mm) _A1001

    Specification:Material: Aluminum alloyColor: SilverRated Voltage: DC 12VStroke Length: 300mm/12inchLoad capacity: 500NSpeed: 20mm/sDuty cycle: 20%Net weight: 1100g

    Specification:Material: Aluminum alloyColor: SilverRated Voltage: DC 12VStroke Length:...

    Specification:Material: Aluminum alloyColor: SilverRated Voltage: DC 12VStroke Length: 300mm/12inchLoad capacity: 500NSpeed: 20mm/sDuty cycle: 20%Net weight: 1100g

  • 38KG Highest Torque CYS-S8218 Digital Metal Gear Servo _A0989
    Available
    38KG Highest Torque CYS-S8218 Digital Metal Gear Servo _A0989

    Type:  DigitalWeight:  164gOperating Voltage:    6.0~7.4VoltsOperating Temperature Range:    (-)10 to +50 degree COperating Speed (6.0V):   0.20sec/60° at no loadOperating Speed (7.4V):   0.18sec/60° at no loadStall Torque (6.0V):   36kg.cmStall Torque (7.4V):  38kg.cm

    Type:  DigitalWeight:  164gOperating Voltage:    6.0~7.4VoltsOperating Temperature...

    Type:  DigitalWeight:  164gOperating Voltage:    6.0~7.4VoltsOperating Temperature Range:    (-)10 to +50 degree COperating Speed (6.0V):   0.20sec/60° at no loadOperating Speed...

  • Power HD High-Torque Servo 1501MG _A0938
    Available
    17 Kg·Cm Power HD High-Torque Servo 1501MG _A0938

    Key specs at 6 V: 0.14 sec/60°, 240 oz-in (17 kg-cm), 60 g. The 1501MG is a metal-geared analog servo from Power HD that delivers extra-high torque normally associated with much more expensive or larger servos. This is one of our most popular standard-size servos. Servo horns and associated hardware are included....more detail given below

    Key specs at 6 V: 0.14 sec/60°, 240 oz-in (17 kg-cm), 60 g. The 1501MG is a...

    Key specs at 6 V: 0.14 sec/60°, 240 oz-in (17 kg-cm), 60 g. The 1501MG is a metal-geared analog servo from Power HD that delivers extra-high torque normally associated with much...

  • Futaba S3003 Servo Motor _A0832
    Available
    Futaba S3003 Servo Motor _A0832

    Control System: +Pulse Width Control 1520usec NeutralRequired Pulse: 3-5 Volt Peak to Peak Square WaveOperating Voltage: 4.8-6.0 VoltsOperating Temperature Range: -20 to +60 Degree COperating Speed (4.8V): 0.23sec/60 degrees at no loadOperating Speed (6.0V): 0.19sec/60 degrees at no loadStall Torque (4.8V): 44 oz/in. (3.2kg.cm)Stall Torque (6.0V): 56.8 oz/in. (4.1kg.cm) ... detail below

    Control System: +Pulse Width Control 1520usec NeutralRequired Pulse: 3-5 Volt Peak to...

    Control System: +Pulse Width Control 1520usec NeutralRequired Pulse: 3-5 Volt Peak to Peak Square WaveOperating Voltage: 4.8-6.0 VoltsOperating Temperature Range: -20 to +60...

  • 3V~12V DC Gear Motor
    Available
    6V 60rpm DC Gear Motor _A0287

    DC electric gear motorVoltage: DC 6VRPM:6V : 60rpm/min 60mA~180mA torque: 0.5 ~ 3KGWeight: 31g

    DC electric gear motorVoltage: DC 6VRPM:6V : 60rpm/min 60mA~180mA torque: 0.5 ~...

    DC electric gear motorVoltage: DC 6VRPM:6V : 60rpm/min 60mA~180mA torque: 0.5 ~ 3KGWeight: 31g

  • CCPM Servo Tester
    Available
    CCPM Servo Tester _A0371

    This servo tester is a simple servo testing tool at an extraordinary price! Specs:Voltage Input: 4.8~6vTest Modes: Manual, Neutral and AutoConnect and test up to 3 servos simultaneously 

    This servo tester is a simple servo testing tool at an extraordinary price!...

    This servo tester is a simple servo testing tool at an extraordinary price! Specs:Voltage Input: 4.8~6vTest Modes: Manual, Neutral and AutoConnect and test up to 3 servos...

  • 6V 60RPM Mini DC Gear Motor
    Available
    6V 60RPM Mini DC Gear Motor _A0288

    Electronic Components OPERATING VOLTAGE 6 -volt Specifications RPM (RATED MAXIMUM) 60~100 rpm TORQUE, EFFECTIVE 1.1 kg/cm Manufacturer BRAND GUOLING MODEL                                GA12YN20 PACKAGE TYPE OEM Dimensions DEPTH 10 mm HEIGHT 24.3 mm WIDTH 12.1 mm PRODUCT WEIGHT 9.5 g

    Electronic Components OPERATING VOLTAGE 6 -volt Specifications RPM (RATED MAXIMUM)...

    Electronic Components OPERATING VOLTAGE 6 -volt Specifications RPM (RATED MAXIMUM) 60~100 rpm TORQUE, EFFECTIVE 1.1 kg/cm Manufacturer BRAND GUOLING MODEL...

  • 3V~12V DC Gear Motor
    Available
    6V 10rpm DC Gear Motor _A0287

    DC electric gear motorVoltage: DC 6VRPM:6V : 10rpm/min 60mA~180mA torque: 0.5 ~ 3KGWeight: 31g

    DC electric gear motorVoltage: DC 6VRPM:6V : 10rpm/min 60mA~180mA torque: 0.5 ~...

    DC electric gear motorVoltage: DC 6VRPM:6V : 10rpm/min 60mA~180mA torque: 0.5 ~ 3KGWeight: 31g

  • DC Gear Motor (1.5V-9V , 15rpm-90rpm)
    Available
    DC Gear Motor (1.5V-9V , 15rpm-90rpm) _A0282

    [Voltage] 1.5V-9V voltage [Speed] 15-90 rev / min

    [Voltage] 1.5V-9V voltage [Speed] 15-90 rev / min

    [Voltage] 1.5V-9V voltage [Speed] 15-90 rev / min

  • 360-DEGREE CONTINUOUS ROTATION SERVO
    Available
    360-DEGREE CONTINUOUS ROTATION SERVO 240

    As long as the input signal end of a50HZ square wave signals, and then the cycle of the control signal of high level pulse duration can control the speed and reverse and stop. A high pulse duration corresponding to a speed. 

    As long as the input signal end of a50HZ square wave signals, and then the cycle of the...

    As long as the input signal end of a50HZ square wave signals, and then the cycle of the control signal of high level pulse duration can control the speed and reverse and stop. A...

  • MG996 METAL GEAR SERVO
    Available
    MG996 Metal Gear Servo 10Kg-Cm _A0239

    This is essentially an upgraded version of the famous towerpro MG995 servo. It now has a redesigned PCB and IC controll system which makes it far more accurate. Its internal gearing and motor are also upgraded to improve dead bandwith and centering.

    This is essentially an upgraded version of the famous towerpro MG995 servo. It now has...

    This is essentially an upgraded version of the famous towerpro MG995 servo. It now has a redesigned PCB and IC controll system which makes it far more accurate. Its internal...

  • SG90 9G SERVO TOWERPRO
    Available
    SG90 9G SERVO TOWERPRO_A0014

    Description: The TowerPro SG90 mini servo is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck use.

    Description: The TowerPro SG90 mini servo is lightweight, high-quality and...

    Description: The TowerPro SG90 mini servo is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with...

  • DC GEAR MOTOR + WHEEL (SET)
    Available
    DC GEAR MOTOR + WHEEL (SET)_A0083

    Motor: Gear Motor (1:48)Voltage:  DC 3V, DC 5V, DC 6VCurrent: 100 MA, 100MA, 120MAReduction rate: 48:1RPM (With tire): 100, 190, 240Tire Diameter: 66mmCar Speed(M/minute): 20, 39, 48

    Motor: Gear Motor (1:48)Voltage:  DC 3V, DC 5V, DC 6VCurrent: 100 MA, 100MA,...

    Motor: Gear Motor (1:48)Voltage:  DC 3V, DC 5V, DC 6VCurrent: 100 MA, 100MA, 120MAReduction rate: 48:1RPM (With tire): 100, 190, 240Tire Diameter: 66mmCar Speed(M/minute): 20,...