Categories

Specials

All specials

Best sellers

All best sellers

HobbyKing Items There are 18 products.

  • Eachine Tiny QX90 90mm Micro FPV Racing Quadcopter FRSKY RX B&F _A1374
    Available
    Eachine Tiny QX90 90mm Micro FPV Racing Quadcopter FRSKY RX B&F _A1374

    This is an exciting mini FPV Quadcopter bind and fly package. The Tiny QX 90 Micro FPV Racing Quadcopter has everything you need already installed on the 90mm carbon fiber X frame.  It comes complete with the usual’s, such as an SPracing F3 EVO Brush Flight Controller, 8520 brushed motors, brushed ESCs, 56mm propellers, 3.7v 600mAh batteries but has the additional goodies of 5.8GHz 25mW 32 channel VTx, 520TVL HD CMOS 1/4“ FPV camera and a...

    This is an exciting mini FPV Quadcopter bind and fly package. The Tiny QX 90 Micro FPV...

    This is an exciting mini FPV Quadcopter bind and fly package. The Tiny QX 90 Micro FPV Racing Quadcopter has everything you need already installed on the 90mm carbon fiber X...

  • RacerCube Integrated F3 EVO 4 In 1 20A F396 ESC Frsky 8CH PPM/SBUS Receiver for X Racing Frame _A1373
    Available
    RacerCube Integrated F3 EVO 4 In 1 20A F396 ESC Frsky 8CH PPM/SBUS Receiver for X Racing Frame _A1373

    Features:1. Buzzer ready2. RSSI/ VOLTAGE DETECOTR Ready 3. Ultra-light integration suite,PNP, do not need cumbersome wiring4. F3_EVO FLIGHT CONTROLLER Jaw-Dropping Flight Performance 5. STM32F3 chip F3 EVO flight control, support CLEANFLIGHT / BETAFLIGHT program6. Built-in MWOSD, aircraft real-time data status real-time back to the FPV display or GOGGLES7. Built-in SD card, integrated CLEANFLIGHT BLACKBOX function, PID adjustment more at a...

    Features:1. Buzzer ready2. RSSI/ VOLTAGE DETECOTR Ready 3. Ultra-light integration...

    Features:1. Buzzer ready2. RSSI/ VOLTAGE DETECOTR Ready 3. Ultra-light integration suite,PNP, do not need cumbersome wiring4. F3_EVO FLIGHT CONTROLLER Jaw-Dropping Flight...

  • RunCam Swift
    Available
    RunCam Swift Mini FPV Camera with 2.8mm Lens (IR Blocked, Orange) _A1371

    Accurate exposure algorithm, able to adapt to a variety of FPV Scenes.Specification:Brand Name: RuncamMode: SwiftColor: Orange,  Black and SilverIR: IR BlockImage Sensor: 1/3 SONY SUPER HAD II CCDHorizontal Resolution: 600TVLLens: 2.8mmSignal System: PAL more detail given below....

    Accurate exposure algorithm, able to adapt to a variety of FPV...

    Accurate exposure algorithm, able to adapt to a variety of FPV Scenes.Specification:Brand Name: RuncamMode: SwiftColor: Orange,  Black and SilverIR: IR BlockImage Sensor: 1/3...

  • X-CAM A10-3H 3 Axis 360Deg Rotation GoPro Gimbal With A/V Link _A0800
    Available
    X-CAM A10-3H 3 Axis 360Deg Rotation GoPro Gimbal With A/V Link _A0800

    The X-CAM A10-3H Gimbal it at the top of the list when it comes to gimbals, the A10 has True continuous rotation 3-Axis ability with A/V Video link transfer. Full control over Roll, Tilt, Yaw, Mode and Zero home. And charging with A/V out transfer for the GoPro hero camera...more detail given below

    The X-CAM A10-3H Gimbal it at the top of the list when it comes to gimbals, the A10 has...

    The X-CAM A10-3H Gimbal it at the top of the list when it comes to gimbals, the A10 has True continuous rotation 3-Axis ability with A/V Video link transfer. Full control over...

    ₨ 28,000
    Add to cart View
  • Multi-Rotor Roll/Tilt GoPro Hero 2 Camera Mount _A0612
    Available
    Multi-Rotor Roll/Tilt GoPro Hero 2 Camera Mount _A0612

    Start capturing amazing aerial video with your multi-rotor frame and this roll/tilt camera mount! This mount is designed to fit twin-rail camera mount multi-rotor frames such as Bumblebee, Ideafly etc.This camera mount offers you roll and tilt control of your on-board camera while flying. It is constructed from fiberglass and aluminum alloy offering rigidity while ...more detail given below

    Start capturing amazing aerial video with your multi-rotor frame and this roll/tilt...

    Start capturing amazing aerial video with your multi-rotor frame and this roll/tilt camera mount! This mount is designed to fit twin-rail camera mount multi-rotor frames such as...

  • Gemfan 5030 Multirotor Propellers One Pair CW CCW (RED) _A0607
    Available
    Gemfan 5030 Multirotor Propellers One Pair CW CCW (RED) _A0607

    GemFan Propellers have set the gold standard in the small class Multirotor community. Known for their durability, great balancing and superb hub centering and expendable price. They come packaged as a set of 2, with one CW rotation and one CCW rotation. There is a wide range of color options that can be mixed and matched to help with multirotor orientation...more detail given below

    GemFan Propellers have set the gold standard in the small class Multirotor community....

    GemFan Propellers have set the gold standard in the small class Multirotor community. Known for their durability, great balancing and superb hub centering and expendable price....

  • Turnigy Talon Tricopter (V1.0) - Integrated Tail Servo Mount Set _A0603
    Available
    Turnigy Talon Tricopter (V1.0) - Integrated Tail Servo Mount Set _A0603

    Turnigy Talon Tricopter (V1.0 ) - Integrated Tail Servo Mount Set

    Turnigy Talon Tricopter (V1.0 ) - Integrated Tail Servo Mount Set

    Turnigy Talon Tricopter (V1.0 ) - Integrated Tail Servo Mount Set

  • Turnigy Talon Quadcopter (V2.0) Carbon Fiber Frame 550mm  _A0602
    Available
    Turnigy Talon Quadcopter (V2.0) Carbon Fiber Frame 550mm _A0602

    The Turnigy Talon V2 Quadcopter frame is a crafted from high quality genuine carbon fiber offering both great looks and performance. Our engineers set out to create a Quadcopter frame without compromise, several materials were tested and rejected until they decided that only genuine carbon fiber would meet the goals we had set out to achieve. Every component was weigh....more detail given below

    The Turnigy Talon V2 Quadcopter frame is a crafted from high quality genuine carbon...

    The Turnigy Talon V2 Quadcopter frame is a crafted from high quality genuine carbon fiber offering both great looks and performance. Our engineers set out to create a Quadcopter...

    ₨ 11,300
    Add to cart View
  • TURNIGY Plush 12amp (2A BEC) BESC _A0595
    Available
    TURNIGY Plush 12amp (2A BEC) BESC _A0595

    Plush 12A-E Brushless Speed ControllerThe pulsar series ESC are a very good quality controller. They have a broad range of programming features and a smooth throttle response compared to other BESCs int he same price range.You will find the throttle curve very linear... more detail given below

    Plush 12A-E Brushless Speed ControllerThe pulsar series ESC are a very good quality...

    Plush 12A-E Brushless Speed ControllerThe pulsar series ESC are a very good quality controller. They have a broad range of programming features and a smooth throttle response...

  • HobbyKing 30A BlueSeries Brushless Speed Controller _A0593
    Available
    HobbyKing 30A BlueSeries Brushless Speed Controller _A0593

    Its no “Mystery” where these ESCs are made, now they are available to you at HobbyKing prices. Built with imported N-Channel mosFET's and an ultra fast Atmel MCU & heartbeat make this a high performance ESC with excellent sync capabilities. This ESC has a 3A BEC for solid reliable servo power.Programma....more detail given below

    Its no “Mystery” where these ESCs are made, now they are available to you at HobbyKing...

    Its no “Mystery” where these ESCs are made, now they are available to you at HobbyKing prices. Built with imported N-Channel mosFET's and an ultra fast Atmel MCU & heartbeat...

  • Afro ESC USB Programming Tool _A0587
    Available
    Afro ESC USB Programming Tool _A0587

    This handy tool allows you to quickly and easily update the firmware of your Afro ESC by connecting directly to the ESCs signal wire and then to the USB port of your PC. There is no need to cut open the heat shrink or use any additional interface components. Simply plug it in and go!

    This handy tool allows you to quickly and easily update the firmware of your Afro ESC...

    This handy tool allows you to quickly and easily update the firmware of your Afro ESC by connecting directly to the ESCs signal wire and then to the USB port of your PC. There...

  • Camera Gimbal Tilt Mount for Bumblebee Quadcopter Frame _A0585
    Available
    Camera Gimbal Tilt Mount for Bumblebee Quadcopter Frame _A0585

    This camera gimbal tilt mount makes for stunning video recording capability with your Bumblebee Quadcopter. It included a pre-mounted metal gear mini servo which allows for tilt action.....more detail given below

    This camera gimbal tilt mount makes for stunning video recording capability with your...

    This camera gimbal tilt mount makes for stunning video recording capability with your Bumblebee Quadcopter. It included a pre-mounted metal gear mini servo which allows for tilt...

  • Brushless Action Camera Gimbal for DJI Phantom and Quanum Nova (w/Gimbal Controller and Motors) _A0582
    Available
    Brushless Action Camera Gimbal for DJI Phantom and Quanum Nova (w/Gimbal Controller and Motors) _A0582

    This carbon fiber brushless camera gimbal is designed for use with action cameras such as the GoPro Hero 3 and Turnigy HD ActionCam. It is made almost entirely out of high quality carbon fiber and comes pre-assembled with the motors and gimbal controller (Martinez) installed. The gimbal controller has been pre-tuned and is ready to use. ... more detail given below

    This carbon fiber brushless camera gimbal is designed for use with action cameras such...

    This carbon fiber brushless camera gimbal is designed for use with action cameras such as the GoPro Hero 3 and Turnigy HD ActionCam. It is made almost entirely out of high...

    ₨ 25,000
    Add to cart View
  • Brushless ActionCam Gimbal With 2208 Motors and 3K Carbon Construction _A0581
    Available
    Brushless ActionCam Gimbal With 2208 Motors and 3K Carbon Construction _A0581

    HobbyKing introduces the ActionCam Gimbal, a quality built universal sports camera brushlessgimbal. The ActionCam Gimbal frame is made up of precision cut carbon that is ingeniously mated to aluminum supports, for a simple yet strong frame. For stabilized motion, the gimbal is fitted with two....more detail given below

    HobbyKing introduces the ActionCam Gimbal, a quality built universal sports camera...

    HobbyKing introduces the ActionCam Gimbal, a quality built universal sports camera brushlessgimbal. The ActionCam Gimbal frame is made up of precision cut carbon that is...

  • Turnigy Multistar 4225-610Kv 16Pole Multi-Rotor Outrunner _A0574
    Available
    Turnigy Multistar 4225-610Kv 16Pole Multi-Rotor Outrunner _A0574

    Looking for the ultimate power system for your next Multi-rotor project? Look no further!The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors ....more detail given below

    Looking for the ultimate power system for your next Multi-rotor project? Look no...

    Looking for the ultimate power system for your next Multi-rotor project? Look no further!The Turnigy Multistar outrunners are designed with one thing in mind - maximising...

  •  Turnigy Multistar 4220-650Kv 16Pole Multi-Rotor Outrunner _A0571
    Available
    Turnigy Multistar 4220-650Kv 16Pole Multi-Rotor Outrunner _A0571

    Looking for the ultimate power system for your next Multi-rotor project? Look no further!The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, t...more detail given below

    Looking for the ultimate power system for your next Multi-rotor project? Look no...

    Looking for the ultimate power system for your next Multi-rotor project? Look no further!The Turnigy Multistar outrunners are designed with one thing in mind - maximising...

  • Available
    HobbyKing FPV250 Racer Long Frame Upgrade kit A0569

    This is the perfect upgrade to the wildly popular FPV250 Quadcopter, allowing more space and configuration options for FPV use. The Long Frame kit is precision CNC cut and matched with hot red anodized aluminum standoffs. The upgrade kit is a dire...more detail given below *Note: This is the upgrade long frame kit and does not include the required FPV250 frame.

    This is the perfect upgrade to the wildly popular FPV250 Quadcopter, allowing more...

    This is the perfect upgrade to the wildly popular FPV250 Quadcopter, allowing more space and configuration options for FPV use. The Long Frame kit is precision CNC cut and...

  • Turnigy Multistar 4225-390Kv 16Pole Multi-Rotor Outrunner _A0568
    Available
    Turnigy Multistar 4225-390Kv 16Pole Multi-Rotor Outrunner _A0568

    Looking for the ultimate power system for your next Multi-rotor project? Look no further! The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth r....more detail given below

    Looking for the ultimate power system for your next Multi-rotor project? Look no...

    Looking for the ultimate power system for your next Multi-rotor project? Look no further! The Turnigy Multistar outrunners are designed with one thing in mind - maximising...